Re: HP ML310e G8 & HP P812
Hello i had covered your points below,The controller which suppor by ML310e gen8 as below HP Smart array P222 controller:HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller...
View ArticleDL380 Gen 10 SAS HDD installation
Hello I have a DL380 Gen10 Server (P06419-B21)and I installed 3 SAS (846524-B21).With intelligent provisioning the system can not see any disk do I have to set up anything to make them visible, the...
View ArticleRe: HP Proliant G8 not detecting USB devices
wrote:All the ports were not detecting Dearis USB disabled in RBSU?
View ArticleRe: HP P410 RAID adapter for Proliant Gen8 Server
Hello, Storage Controller which is designed to support the server model DL380p Gen8 as below and if incompatibility controller is installed on the server the appropriate function level will not...
View ArticleClik here to view.
Replace non-existent drive in array with unassigned drive
Hi,I have a P420 card in a Gen 8 dl360e server and I've been having some problems with my RAID 10 array.The drive in bay 1 has appeared to fail. I say appeared, because on taking the drive out and...
View ArticleHPE DL3x0 Gen10 Chassis Intrusion Detection Kit
When a chassis intrusion detection kit has been place in a proliant dl3x00 kit the system will generate via ILO a log code in the ILO logs.is anyone having experience or a "how-to" procedure that...
View ArticleRe: Vsphere 6.7 Update 2 announcement
Hi, is there any news on vSphere 6.7 U2 VSAN U2 support ?
View ArticleHPE Smart Array S100i SR Gen10 Software RAID Problem
Hi, I'm facing some big troubles to install WS 2016 in a DL385 Gen10 server. I'll try to put the details chronologically:- I make the software raid on the BIOS. I have 2 SSD M.2 SATA 1TB each, raid 1....
View ArticleRe: Replace non-existent drive in array with unassigned drive
Hello,It is not recommended not to swap the ports as it may even lead to data loss if the controller is not able to read the RIS information on the member disks. In case if you are trying to add 2I.1...
View ArticleRe: Replace non-existent drive in array with unassigned drive
Thanks for the response.I'm not sure how to add the unassigned disk as a spare - the ACU doesn't provide me with any options to do this, or make any changes to the logical array other than simply...
View ArticleRe: Replace non-existent drive in array with unassigned drive
Regarding data loss - this doesn't seem to have been a problem. While one of the drives is currently not part of the array, the degraded logical drive is functioning perfectly and my VMs are running...
View ArticleRe: Firmware and drivers for HP Proliant DL380 Gen 7 with Ubuntu Server...
refer the HPE support...
View ArticleRe: DL380 Gen 10 SAS HDD installation
Hello valeriolomba,Thank you for the query.This issue requires further investigation as we need to check the cabling and the controller compatibility to confirm the exact point of failure. Please log a...
View ArticleRe: 10 disk RAID 10 across 2 cages in ML350 G8p ??
Hi Rob,It does not matter if the drives are in two different cages. You can go ahead and create raid. Theoretically its possible to run HyperV host from the SSD mirror and have the Raid 10 to store...
View ArticleRe: MDS mitigation bios for older Proliant servers?
Hello Team,you can download the bios for Gen 8 in latest gen8 SPP. http://h17007.www1.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspxfor custom request you need to engage the ASM...
View ArticleRe: 10 disk RAID 10 across 2 cages in ML350 G8p ??
I think the question is if a single (hardware) array can be spanned across multiple controllers; so 2 controllers, 14 1.2TB disks, 1 RAID 10 array.I don't think HPE (any) controllers can do...
View ArticleRe: 10 disk RAID 10 across 2 cages in ML350 G8p ??
PS: If you're using Hyper-V, are you clustered? If so, check out Storage Spaces Direct (S2D).
View ArticleRe: HP DL380 Gen8 GPT / MBR problem
HP DL380e Gen8 not support the UEFI mode, you can find the option in HP Gen 9.we can say that UEFI boot mode support more than 2 TB storage and Legacy mode support UP to 2 TB, so the solution is...
View ArticleRe: hp proliant DL370 G6 with windows server 2016 - i need base system drive
Hi:You need this driver....https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1121413&swItemId=MTX_3118964d337545c0b678f39ad4&swEnvOid=4064Here is a partial copy and paste of the driver...
View ArticleMove SmartArray P800 from server A (Proliant ML350 Gen5) to server B...
Hi,We have 2 servers in our company: server A which is an HP Proliant ML350 Gen5 with Windows Server 2003 and server B which is an HP Proliant ML350 Gen6 with Windows Server 2008.We have a Smartarray...
View Article