Re: Hard Drive space
scharchouf wrote:it depends on the type of controller card installed and its technical characteristicswhat type of card you have installed? Another thread that is several years old. Please look at the...
View ArticleRe: Caddy for DL380 G5 (2.5in hot plug)?
which kinf of controller card is installed on this server?
View ArticleRe: RAID 6 Expansion
Ecosse, Easiest thing to do is swap out both remaining 72GB disk with 146 GB disks. This will double your available space in your RAID6 array. If you use (M$) Diskpart, you will not be able to extend...
View ArticleWill P-III CPU work in a Proliant 1600 with P-II ?
I have an old Proliant 1600 server with a Pentium II 350MHz CPU. Will it work with a Pentium III 600MHz CPU?
View ArticleProblem Configuring ILO4 on an DL320 Gen8 Server _ Questions ?
Hello , I have some questions about configuring the ILO4 on an DL320 Gen 8 Server. There is no dedicated ILO4 Port on the Server. Only 2 "normal" LAN NICS. First Question : is it possible to configure...
View ArticleRe: Problem Configuring ILO4 on an DL320 Gen8 Server _ Questions ?
>I have some questions about configuring the ILO4 on an DL320 Gen 8 Server. >There is no dedicated ILO4 Port on the Server. Only 2 "normal" LAN NICS. >First Question : is it possible to...
View ArticleRe: Problem Configuring ILO4 on an DL320 Gen8 Server _ Questions ?
Thanks for the fast answer . The i think for me is the best to order the "HP Dedicated iLO Management Port Kit" . Ist this the right one ?...
View ArticleRe: Best way to config storage for Server 2012 R2
Yeah, just want to ensure I get maximum bang for buck and the new features of the new O/S can ensure that if setup right, but all the MS videos/discussions seem to revolve around simpler hardware or...
View ArticleRe: Problem Configuring ILO4 on an DL320 Gen8 Server _ Questions ?
what is the part number (product-id) of your system?
View ArticleRe: Problem Configuring ILO4 on an DL320 Gen8 Server _ Questions ?
Michael Schindler wrote:Thanks for the fast answer . The i think for me is the best to order the "HP Dedicated iLO Management Port Kit" . Ist this the right one ?...
View ArticleRe: Will P-III CPU work in a Proliant 1600 with P-II ?
hello, I tried that trick a long time ago on a similar PL1600, from dual Pent II 350 to dual pent III 450... and it failed.but according to the Intel Specs, it should have worked. with the new CPUs,...
View ArticleRe: Can i mix SATA & SAS HDD's in a same array server Ml 350 g6
You can have a mixture of SATA and SAS drives on the same controller, but you cannot mix them in an array.
View ArticleDL360 Gen 8 P420i/zm
Hello, I have a DL360 server with one drive installed. This has the OS already installed and configured. I have inserted another identical drive and wish to migrate from single disk raid 0 to two disk...
View ArticleRe: DL360 Gen 8 P420i/zm
Thanks Jimmy. So i cannot expect to insert an addtional drive of the same capacity and expect it to automaticaly mirror? Even if I reboot the server? Cheers
View ArticleDL380e - replacing 25sff with 8sff + optical (cage, backplane)
HI. I'll try to keep this succinct. A DL380e server was ordered and installed with a 25sff cage/backplane as shown on page 64 (3rd image) of this PDF:...
View ArticleRe: DL380e - replacing 25sff with 8sff + optical (cage, backplane)
Just a question to clarify....Is it that you need an on-board DVD in the server? Or can you use an external DVD via USB? Without looking at both servers parts breakout, I would think it would be...
View ArticleRe: DL380e - replacing 25sff with 8sff + optical (cage, backplane)
We aren't able to attach an external drive in the physical setup. Additionally the need is for a custom piece of software that seems to have trouble accessing the optical drive if connected via USB.I...
View ArticleRe: DL380e - replacing 25sff with 8sff + optical (cage, backplane)
OK Thanks...will look around...
View Article