Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Browsing all 30225 articles
Browse latest View live

Re: cpqlocfg.exe issues

I bet there aren't that many people using the lights out config util to get system info.  SNMP or WMI is probably more common for that kind of thing, but that's a guess.

View Article


Re: Applying Offline Firmware without HP SUM or Firmware DVD ?

Ditto on that last reply.  I've used the HP USB key thing to make a smaller bootable image and then put just the scexe update file needed on there. I also think it would work to take the normal ISO and...

View Article


Re: Array Accelerator Battery has Failed

The error was that the charge was low. I said the server is new, but I mean relatively new. It's been in operation since November, and these messages about a low charge started showing up in late...

View Article

Re: Best way to config storage for Server 2012 R2

I always try to set RAID levels and sizes based on what the server will be doing. SQL is different than file serving which is different than web serving.I like the idea of using the pair of 100GB SSD...

View Article

Re: Best way to config storage for Server 2012 R2

Hi Waaronb,Agree with you on using standard RAID, I usually use RAID 10 vs RAID 5/6 though, but that's just personal choice. But still trying to work out how to mix the classic setup with the new...

View Article


ML310 G5 Raid1 Drive Replace

Posting again because I'm desperate for an answer. Have a ProLiant ML310 G5 with Raid 1 config containing (2) 250gb drives.  One of the drives is showing "SMART failed" upon boot so I am trying to swap...

View Article

Re: HP Proliant DL380 G5 NIC's not found after firmware update

Hi Satus, Do you have an image you can share with me?  I am having trouble sourcing all the necessary files.

View Article

MicroServer N40L Issue with AMD RaidXpert

I have Raid 1 mirror on a HP N40L Microserver that had a drive go bad. I did not have a spare identified. I have replaced the drive but can't get the raid to rebuild. I go to the logical drive. I...

View Article


Re: Applying Offline Firmware without HP SUM or Firmware DVD ?

waaronb wrote:Ditto on that last reply.  I've used the HP USB key thing to make a smaller bootable image and then put just the scexe update file needed on there.The Scripting Toolkit is more than just...

View Article


Re: end of life and support

I have some BL480c blades could somebody tell me the end of support for these ? and also bl460 G7 servers

View Article

[Smart Array Controler]E200 - POST Error 1794

Hi all, I've a HP Proliant ML310 G4 and Smart Array Controler E200. I've a POST Error 1794. So,  I've replaced the module cache with battery, 2 times ,and upgrade the firmware with the last version...

View Article

Re: [Smart Array Controler]E200 - POST Error 1794

1794-Drive Array - Array Accelerator Battery Charge Low......Array Accelerator is temporarily disabled.Array Accelerator will be re-enabled when battery reaches full charge.Audible Beeps: NonePossible...

View Article

Re: ProLiant DL120 G5: max. SATA HDD capacity supported in RAID mode

Wich type of controller card is installed on the server?

View Article


Re: ProLiant DL580 and DL360 servers

can you explain us what is you need?do you have any problems with the server, latency, start, stop?

View Article

Re: Active -Active Clustering a DL380 GC

can you explain what's your need?

View Article


Re: Install OS in Proliant ML330 but I get no Hard Disk Found.

which type of controller card is installed on this server?it's an Gen 8 server?

View Article

Re: Hard Drive space

it depends on the type of controller card installed and its technical characteristicswhat type of card you have installed? 

View Article


Re: SCSI Port 2 : I/O Board Responding at Wrong SCSI ID.

it's possibale to send us an ADU report?

View Article

Re: Install OS in Proliant ML330 but I get no Hard Disk Found.

scharchouf wrote:which type of controller card is installed on this server?it's an Gen 8 server?You do realize you're inquiring about a post that is about 12 years old.....

View Article

Re: Rolling back RAID 5 using 2 from 3 drives

RAID 5 offers the possibility of losing just one disc, if two disks RAID 5 created before is intact, just replaced your third album and reconstructions will be made.if one of the disks in the RAID 5...

View Article
Browsing all 30225 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>