Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Browsing all 30225 articles
Browse latest View live

Summary of found troubles on Proliant server SE1102, DL180 G5, ML150 G5

Hi all, I would like to summarize some issues and irregularity found on my SE1102 Proliant server that mounts very similar MB as the DL180 G5 and ML150 G5 at the point that you can exchange the Ibises;...

View Article


Re: DL320e Gen8 v2 fan noise

On mine in AHCI mode or with no drives in (using an LSI controller instead), I am still about 30-35% fans.  No OS driver (debian). Here are some other comments on the DL320e v2...

View Article


Re: HP DL120G7 Srvr Ipo R8.1+ME Exp - NEED HELP PLS...

For HP DL120G7 Srvr Ipo R8.1+ME Exp http://www.ipofficeinfo.com/TechBulletins/tb145.pdf For DL Proliant DL120G7 http://h18000.www1.hp.com/products/quickspecs/14009_div/14009_div.pdf The DL120G7 Srvr...

View Article

Re: firmware update for BF03685A35 Ultra320 SCSI drive

This is the support page for old U3/U320...

View Article

SAS Drivers for ML310 G4 server

Hallo everyone i coudnt  find on the driver download area releated to the product ML310 G4,  the SAS driversfor windows 2008 and linux operating system as well. right now i have 2 SAS disk 146GB The...

View Article


Re: Problem with iLo on server HP DL 360 G3

iLO was probably disabled on that box.   Open the hood and flip iLO security switch.  The F8 Prompt should be back and then, you should be able to re-enable iLO capabilities from the configuration menu. 

View Article

Re: SPP 2014.02 - Broadcom 1Gb network driver; Problem with Trendmicro...

We can reproduce this problem, too. And so, we are not able to upgrade to the last SPP Version 2014.02, because we are only install full SPP versions on all of our 300 servers. Going on with 2013.09....

View Article

Re: HP DL120G7 Srvr Ipo R8.1+ME Exp - NEED HELP PLS...

yes ;)

View Article


Re: PCI\VEN_1095&DEV_3132&SUBSYS_71321095&REV_01 drivers

the best way is with SPPhttp://h17007.www1.hp.com/us/en/enterprise/servers​/products/service_pack/spp/index.aspx

View Article


Re: Matrox G200eH Video Driver for Microsoft Windows Server 2012

yes it's for Windows Server 2012 x64 & Windows Server 2012 and Server 2012 R2

View Article

DL360p - Raid Setup/Performance Question

Hi there. We want to buy a new DL360 Server for virtualization (hyper-v 2012R2).Within an array you could create logical drives with different raid levels. what would be the "best" setup regarding...

View Article

Re: SAS Drivers for ML310 G4 server

the best way to update your server with the lastest Drivers & Firmware Version, you need to install theme using SPP...

View Article

Re: DL360p - Raid Setup/Performance Question

ther's no problem if you MIX 2 array on the same Controller Card So you can creat a RAID 1+0 with 2 HDD in order to have Performance & Security if ONE HDD Failedand another RAID 5 with 6 HDD

View Article


Re: DL360p - Raid Setup/Performance Question

Thank you for your answer.If I create an array, there is no option for raid level.only for logical drives.does it make sense, to use 2 disks (array1) only for raid1 logical drives, and 6 disks (array2)...

View Article

Re: DL380p Proliant Intelligent Provisioning Failure

Version 1.60 is available through Intellegent Provisioning (if you select the "Maintainence" option and are connected to the internet). Unfortunately i got a strange error code with a red X...  An...

View Article


Re: SAS Drivers for ML310 G4 server

Is this iso bootble , since there no operating system installed due to the drivers disk issue ?

View Article

Re: SAS Drivers for ML310 G4 server

You could try to install the OS by booting an older SmartStart DVD like this:...

View Article


Re: HP Proliant DL380 G5 NIC's not found after firmware update

One can use the "nvm cfg" command to manually set parameters to match those of the HP NC373i.The attached file shows the "nvm cfg" settings on one of my "good" NC373i ports.

View Article

Re: HPDL320S G1 - Spare Management - Unknown error

To Solve the problem please Use the last version of ACU 7.6 or  8.25 

View Article

CPU and Memory upgrade on Proliant ML350G6

Greetings, I am planning on upgrading a Proliant ML350G6 server and add an additional CPU and some memory.Unfortunately the HP memory configuration tool just made me more confused so I hope someone...

View Article
Browsing all 30225 articles
Browse latest View live