Proliant ml110 G5 RAID 1 Migration to higher capacity drive
Hi, I have a serverwith two old 250 GBdrivesconfiguredRAID 1.I've runout of disk space, I want to remove the old ones and replace them withtwo new500 GB drives.HowI cando itwithout reinstallingthe OS?.
View ArticleProLiant ML350 G5 Smart Array E200i battery failure
My server, which has been offline and unplugged for for a few months, is indicating that it needs a new Smart Array battery, now that I'm attempting to bring it back online. However, the SAS drive in...
View ArticleRe: Proliant ml110 G5 RAID 1 Migration to higher capacity drive
The ML110 G5 ships with a software based RAID contrller. Unlike the Smart Array controller which allows a migration path to larger drives, I don't think this is possible with the software based...
View ArticleRe: DL380p Proliant Intelligent Provisioning Failure
I downloaded and updated the intelliegent provisioning V1.60 - across the internet never completed even when left for some hours. It is over 1GB though. DVD ISO update. Worked 1st time.
View ArticleRe: ProLiant DL380 G7 - Lost NICs after Driver-Update
This bad driver is Part of this SPP.we deploy the SPP and than we get this error.after restore we deploy step by step an indentify the NIC driver as the "bad one"GreetingsRalf
View ArticleRe: ESXi and DL380 Gen8 - Which Drivers?
http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begC...
View ArticleRe: ESXi and DL380 Gen8 - Which Drivers?
The following operating systems are supported for use with Intelligent Provisioning:•Microsoft Windows Server 2012 R2•Microsoft Windows Server 2012•Microsoft Windows Server 2008 R2 Standard,...
View ArticleRe: HP Proliant DL380G5 - Part nº: 440886-425
But for example, i can use only one processor and have 64gb of ram or use 8gb ram modules in each slot?
View ArticleRe: ProLiant DL380 G7 - Lost NICs after Driver-Update
Please try this and keep me informed...
View ArticleRe: HP Proliant DL380G5 - Part nº: 440886-425
you need 2 Processor if you need to use 64 Gb of RAM
View ArticleRe: SAS Drivers for ML310 G4 server
I have trouble booting smartcd and also the HP provisioning ..I use usb as boot device with Rufus... please advise .. can u explain step by step how i should you use the smartcd as bootdevice..or the...
View ArticleRe: SAS Drivers for ML310 G4 server
@ start UP Press F10after that you have 2 options Configure & Install OR Perform Maintenance after that is very simple, Just follow steps showing on screen
View ArticleDL380 G5 windows 7 professional installation
Can you install windows 7 on a DL380 G5? Thank you.
View ArticleRe: SAS Drivers for ML310 G4 server
>>@ start UP Press F10after that you have 2 options Configure & Install OR Perform Maintenance A G4 server has no intelligent provisioning. Since this server has no smart array by default,...
View ArticleRe: SAS Drivers for ML310 G4 server
Oppps I confused this Post with anotherI am so sorry
View ArticleDL360 G4 Power Savings Mode?
Running a DL360 G4 as an OpenBSD firewall. Wanted to change power regulator for Proliant to "Enable HP Dynamic Power Savings Mode"When we do that at boot time before the operating system is booted we...
View ArticleRe: SAS Drivers for ML310 G4 server
So am I right :Insert the USB boot which it have the smartcd software And then press F10 and then follow the screen instruction Is that correct ?Please confirmThnx
View ArticleRe: How to disable single port on a HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
No OS yet, I would like to disable it a BIOS.
View ArticleRe: SAS Drivers for ML310 G4 server
once in bios check the disk controller settings pleasesent from mobile
View Article