Re: SAS Drivers for ML310 G4 server
my product number is : S/n CZJ70804FD THERE ONE THINGS THAT I DONT UNDERSTAND on the bios primary boot order i onlyu sayPCI embded Intel R 828011GRbut i dont see the SAS disks of 146GB 2x of them.....
View ArticleRe: Increase Raid 1 size on Proliant DL380
Ideally I would like to replace the 2 hard drives with 2 new larger items..... but if its going to be easier I would add 2 additional hard drives to the 2 bays I have spare. Thanks for the link, I...
View ArticleRe: Will P-III CPU work in a Proliant 1600 with P-II ?
The P-III processors I wanted to use have their own fans and there are no fan connectors on the processor/RAM board I can use, since the existing P-II processor has a heat sink only. It was worth a...
View ArticleClik here to view.
Re: HP Proliant DL380G5 - Part nº: 440886-425
Beginning with G6 of this server the memory is "per processor", but until G5 it is "per system".This server still has a memory controller between the dimms and the processors. In newer systems this...
View ArticleRe: ProLiant DL380 G7 - Lost NICs after Driver-Update
but there is no solution on Server 2008
View ArticleRe: HP Proliant DL180 G6 - Smart Array P410, bay 1 error
Hi, Thank you for all the replies. Will updating the server firmware for smart array fix the problem??? or do I have to do anything else?? And any guide to achieve this will be helpful as I'm a newbie...
View ArticleRe: HP Proliant DL180 G6 - Smart Array P410, bay 1 error
Replace the bad disk and restore the backup.
View ArticleRe: ML310 G5 AND SMART ARRAY P410 PROBLEM.
Looking at the QuickSpecs for this system, the Smart Array E200, E500, P400, and P800 are the supported optional controllers. That being said, I'm not sure why the P410 wouldn't work. You mention both...
View ArticleRe: DL380 G5 windows 7 professional installation
Even though Windows 7 isn't supported on most ProLiant platforms it does have a driver that will work with most of the Smart Array controllers. I've never tested on a G5, if it sees the disks during...
View ArticleProliant ML350. Addressing an Ultrium 215 Tape Drive With SCO Unix
Hi I have an HP Proliant ML350 running SCO Unix 5.0.7 The system has a SCSI board in slot 3 running my disc array with no problems. However I also have an Ultrium 215 tape drive directly attached to a...
View ArticleRe: ML310 G5 AND SMART ARRAY P410 PROBLEM.
P410 has always worked in this server. I think is a controller failure. I see for hardware support. thanks
View ArticleRe: ML310 G5 AND SMART ARRAY P410 PROBLEM.
If a card is failed, How the servers BOOT? Showing ADU the Card works perfectly, the issue is about configuration
View ArticleRe: ProLiant DL380 G7 - Lost NICs after Driver-Update
I am sure that ther's an issue about configuration or something
View ArticleRe: Proliant DL380 G4 - Are sensors available?
The concern is already the version of VMware installed is not supported on the DL380 G4 VMware Servers & Agents 3.X here is the link:...
View ArticleRe: Proliant ML350. Addressing an Ultrium 215 Tape Drive With SCO Unix
Thanks to anyone reading this. I am making some progress albeit a little slow. In the process of configuring the drive I am being asked to identify the drive type do you think "Genric SCSI Tape Drive"...
View ArticleRe: ML310 G5 AND SMART ARRAY P410 PROBLEM.
when i make ADU the server go up, because a bios have recognized correctly a P410 controller then server start. But after some time windows error occur or when reboot system a system bios don't...
View ArticleRe: Proliant ML350. Addressing an Ultrium 215 Tape Drive With SCO Unix
I hope nobody thinks I've been wasting their time with this but I have managed to resolve the issue and thought I'd post the solution for others with the same problem. As root use sconf -v This will...
View ArticleRe: ML310 G5 AND SMART ARRAY P410 PROBLEM.
So, now an HPSReport is neededPlease choose one application thhat match your OS : http://update.external.hp.com/HPS/HPSreports/ after that launch it under you OS it will gibve you a HPSReport when done...
View Articlehard drive GB0750C8047 is broken - which part to replace?
hi forum i have an ml350 g5 server with an raid 5 with GB0750C8047 drives.one of this drives is broken and i have to replace it. honestly - do i have to replace it with the same type or can i use a...
View ArticleHow to enable Embedded NICs on Proliant dl380 G5
I have a Proliant dl380 G5. In the System ROM the embedded NICS are set for ISCSI. How can I switch back from ISCSI? Thank you in advance. -Kevin
View Article