Re: HP SUM "Failed to add baseline" No default baseline found.
This is truly a ridiculous process. The "1, 2, 3 automatic update" simply doesn't work without a bunch of undocumented clicking trying to figure out how the heck to add a baseline - even the latest...
View ArticleRe: HP SSA Performance question
Yes it's normal to take 15minutes per GB :) check this document you can find on it all responses for you questions :) HP Smart Array controller technology
View ArticleRe: HP ProLiant ML150 G6 Server hard drive problem
thx for your reply ,,,,iam not talking about the raid the hards on the raid are working just fine, iam trying to connect the hards to the sata ports on the mother board , any way ithought that my...
View ArticleRe: DL380 + DL360 G6 not starting Windows after driver update
Hi I have done some more testing, and have a clean built DL380 G7, with Windows 2008 R2 with all microsoft security updates, running: P410i Firmware 6.40Bios Version 2013.07.02HP Homepage 7.3.2.1Hp...
View ArticleiLO4 update failed - Checking HP Secure Digital Signatur
Hi All, I tried to update iLO4 Firmware (1.22 to 1.30) with SPP2013090 but it's failed. When i go to "iLO Firmware" tab, there is the following message : Checking HP Secure Digital Signature, please...
View ArticleHP proliant BL460c G1 Firmware Upgrade
Can anyone let me know what are the steps to do a firmware upgrade on HP proliant BL460c G1. is there any documents for the same ? what all the components should be upgraded in the order .
View ArticleHP USB Flash Utility Fails While Creating Intelligent Provisioning Bootable Key
The HP USB Flash Utility that comes with the lastest Intelligent Provisioning ISO [HPIP160.2014_0113.271.iso] version 1.6 or even version 1.7 fails to finish. I also cannot copy the contents of the...
View ArticleRe: DL380 + DL360 G6 not starting Windows after driver update
That's weird. I have a couple DL360 G6 machines and a few DL360/DL380 G5 machines all running Server 2008 R2 with the latest HP software and drivers, including the NIC driver 7.8.50.0.If the 7.8.6.0...
View ArticleRe: HP SSA Performance question
There will be some performance impact any time you're doing something on the array like extending it, changing stripe sizes, migrating raid levels, etc.You can configure the priority of those...
View ArticleRe: problems after changing hard drive
It sure looks like the P400 is reporting that it doesn't see any drive installed in bay 3 at all. I 'm assuming this was a brand new drive and you can see the HP sticker on the drive itself?If you have...
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
What HP really should do is come out with a firmware "re-flash" that would roll up the fixes mentioned in this thread and allow a simple, easy way to fix the damage they themselves inflicted.Maybe they...
View ArticleRe: HP proliant BL460c G1 Firmware Upgrade
Depending on the installed OS, you may be able to upgrade the BIOS firmware online (still requires a reboot afterwards). You could also use the Service Pack for ProLiant might be your best bet as it...
View ArticleHP Proliant System Management E-mail notification
Hi everyone Can anyone help me with this little issue i have I basically want to setup e-mail notifications via the HP System Management software which is installed on a Proliant ML350e Gen8 server ....
View ArticleRe: HP Proliant System Management E-mail notification
try to send test email from SMH, hardware change Like deplug HDD, firmware for controller card...
View ArticleRe: HP USB Flash Utility Fails While Creating Intelligent Provisioning...
Server? Generation? OS?when you boot ISO it can't finish Installation? there are error?
View ArticleRe: iLO4 update failed - Checking HP Secure Digital Signatur
you update the firmware from iLO? under GUI Interface?
View ArticleRe: HP ProLiant ML150 G6 Server hard drive problem
My question is about controller card installed on this server?Normally when HDD is attached to MOBO the RAID is controlled by Software not the card.
View ArticleRe: HP USB Flash Utility Fails While Creating Intelligent Provisioning...
I am trying to update DL360e Gen8 to Intelligent Provisioning 1.6 for a Windows 2012 R2 MSDN install. Failed attempts to flash using HP Flash Utility version 1.7 were run from Windows 7, 32 bit,...
View ArticleIs an NC523 supported in a DL380 G5?
I am trying to find if the NC523 is supported in a DL380 G5 server. I have a post concerning this also in Serrvers> General. I apologize for duplicate posting... Regards, Louis
View ArticleRe: HP USB Flash Utility Fails While Creating Intelligent Provisioning...
OS Install: Get your Windows DVDGet your OS - Options:– Get your Windows DVD– Put an ISO on a Fat 32 USB key– Put an ISO on a network shareWindows Support– 64 Bit Only–...
View Article