Re: DL380 G6 how to use ilo stonith device
hi, thank you for your reply. "stonith" is part of "pacemaker". So you are right, I am asking for the right syntax of this command. But thanks anyway, now I know there is a CLI of the ILO. Maybe I can...
View ArticleRe: DL365 Post 1611 Fan Failure
If replacing the system I/O board, solved the problem, the you had a bad sys i/i bd. Fan failure is a hardware failure.1. Indicated fan is failed.2. Bad connection.3. Failed system I/O board. There's...
View ArticleMissing NIC's in vmware ESXi 5.5 (HP Proliant DL380 G7)
Hello, I have two identical proliant DL380 G7. Both are running vmware ESXi 5.5.Both servers have the same two networks cards. One Intel NC360T PCI Express Dual Port and one Broadcom NC382i Integrated...
View ArticleRe: Upgrade Order - SPP or OS First?
Thank you kind sir. Just to be sure I understand you, the recommendation is to apply the VMware 5.1_u2 updates first (which contain updates to VMware and the VMware OS device drivers) and then do the...
View ArticleHelp - harddisk sas not detected when install windows 2008 r2
Hi there,Need help please.We just bought e320e g8, and add 2 harddisk 450gb sas.I've configured raid 1 (i found the system use p222 as smart raid).When install windows 2008 r2 enterprise, the windows...
View ArticleRe: Missing NIC's in vmware ESXi 5.5 (HP Proliant DL380 G7)
Have you looked at the ILO hardware status?
View ArticlePXE disabled for XE NIC after PXE boot to HP toolkit 9.60 on HP SL210t
After one PXE to HP toolkit v9.60 on XE 10GB NIC, SL210t will not PXE again until RBSU is reset using Intelligent Provisioning (BIOS reset does not effect the same result). Older toolkit does not have...
View ArticleRe: Proliant DL360 G8 & Server 2012R2
None of that works I updated all the firmware on the servers Did the OS install from DVD boot & used the suggested Smart Array Driver driver One server was able to boot several times but after...
View ArticleRe: Help restore firmware on dl160 G5 !!!
Quiet old post, but today I have the same problem so why leave it without solution...In my case I have the same behavior and I have fix it by updating firmware. HP seems to make only ubs key firmware...
View ArticleExpansion from RAID1 /RAID 1+0
Hi, I've searched these forums and also google and can't seem to find the answer I need. So basically i have a few upcoming projects where this may help. The question is simple: can i migrate online...
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
Sounds like the B120i is still cabled to the drive backplane. Make sure the cables from the backplane have been moved from the embedded B120i to the P222 card? The B120i doesn't support SAS drives.
View ArticleRe: Expansion from RAID1 /RAID 1+0
I forgot to mention, i haven't yet bought the disks to do this.
View ArticleRe: DL380 G6 how to use ilo stonith device
By definiion iLO is not a STONITH device, it is a management engine. It can be used to remotely power off a server, so it can be used for this function. I'm not familiar with pacemaker or its...
View ArticleSPP 2014.02.0B seems to make a ML 350 G6 hang on pulsating logo screen
Downloaded the above mentioned service pack, burnt the ISO to a DVD and booted the server from it. Got a question about interactive or automatic update. Chose interactive. Got to the screen with the...
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
Hi jimmy,Thanks for reply.Do i only need to move the cable,or need another step/setting?I'm not familiar with HP hardware. Usually we bought DL380 which is already preinstalled smart array that support...
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
Yes, the only thing that needs to be done is move the backplane cable from the port on the system board to the port on the P222. I'm going under the assumption that when the P222 was installed the...
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
Hi. Ok i'll look then. I'm still outside of the office.Is there manual instruction related this? Sorry for my basic question.Thanks
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
Hi,I've looked and found that the cable has been attached to the the card.P222 has been set to ctrl 1 on f9/boot controller order.Any advice please? Thanks
View ArticleRe: ML110 G7 not recognising SATA RDX drive
Hi there. Just had same problem with a proliant ML310e gen 8. There is a HP limitation. They do not support SATA RDX drives. If you look at their supported device list all are USB 3.0. There is a USB...
View ArticleClik here to view.
Re: ML110 G6: LOUD FAN noise at power on. Stayed on.
This will sound [ Counter Intuitive ] but trust me it works. I have an ML110 G6 with a Xeon 3440 CPU, and 16 GB of RAM. I thought the [ Rear Fan ] was loud and went looking for a solution. I tried...
View Article