Re: DL580 G3 & VMware 5.1 U1 - Enable 64bit OS Support & SAHF and LAHF support
It maybe that the working units have the 3Ghz 7040 series processors which per VMware KB were not dropped until 5.5.
View ArticleDL380 G6 how to use ilo stonith device
Hello, trying to use STONITH device "external/riloe". This is for shutting down a server via a stonith device. My ilo interface is configured and working. When printing out the help page of the device:...
View ArticleRe: Adding new disk to P410i Controller using ACU
Torsten, thanks for the reply. Looks like I'll have to retire the 160GB disk and replace with the larger one.
View ArticleProliant DL360 G8 & Server 2012R2
Just bought 2 new Proliant DL360 G8's Trying to install MS Server 2012R2 & having issues getting the servers to work The OS installs no problem but after a reboot or two, it won't work anymore. The...
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
Hi all,I had the same problem with some of my DL36-G5 and G6.Some I use the SPP, but one G5 I have updated direclty on ESXi console(using CP021404) and also add the some problem.I have follow Saturas...
View ArticleRe: iLo4 and 'alertmail'
could you Please share the documents as we are facing the same problem.My iLo networks lies on a vlan with A domain whereasSMTP Server lies on another vlan with B domain.we configured to accept the...
View ArticleRe: HP 360 G8 iLo 4and alertmail
Would you mind telling me how u set the so-called "general domain name"? Server lies on different domain (e.g. domain2.com)My setting: [X] Enable ILO Alert Mailemail adres: ABC@domain1.comSender...
View ArticleRe: Proliant DL360 G8 & Server 2012R2
Here is the link to the latest Windows 2012 (R2) driver for the B320i...
View ArticleRe: Proliant DL360 G8 & Server 2012R2
Some of the basic Windows startup troubleshooting techniques might get you pointed in the right direction. Hit F8 when Windows is starting up so you can select some options there, like not...
View ArticleRe: HP 360 G8 iLo 4and alertmail
The "sender domain" is required because ILO will use it's host name + that domain name as the "from" address.For example, if you set that to "test.com" and your ILO has a hostname of "ILO-server", the...
View ArticleRe: Adding new disk to P410i Controller using ACU
You could always add a cache module to the controller. It makes a pretty big difference. A 512MB FBWC option doesn't cost all that much. Probably more than a lot of consumer SATA drives, but you do get...
View ArticleRe: DL380 G6 how to use ilo stonith device
What program are you using to send the command? Is "stonith" something supplied by HP, or is it part of some separate package to knock another cluster node off?The ILO has a command line interface via...
View ArticleRe: DL180 G6 25SFF backplane dual expander ?
No information? There seems to be no documentatio regarding the backplane ...
View ArticleDL365 Post 1611 Fan Failure
Hi I thought I would put down what I did to fix the issue in case it helps anyone else out there. I had a DL 365 that would not boot up saying fan failure (fan 3) and then the server would shut it self...
View ArticleRe: Intelligent Provisioning 1.60 breaks 2008 R2 install (will not accept...
Hmm, this method worked for me a few months back. But I'm setting up a new server now and its not. When I boot off the IP 1.5 DVD (same one i used last time), I never get the choices of Automatic vs...
View ArticleRe: Intelligent Provisioning 1.60 breaks 2008 R2 install (will not accept...
One of two things worked, i installed the iso to a usb key, and also disconnected the ilo from the network (when i was expecting the auto vs interactive prompt it was "communicating with ilo") and this...
View ArticleSAAP Trial license expire
If i build a Raid6 with a SAAP, Smart Array Advanced Pack, Trial license, what happens with the array when the trial expires? Anyone knows a place to buy SAAP for a low price? ML350 G6, P410i w/ 256MB,...
View ArticleRe: Problems with Proliant DL560 Gen 8
I know this is an old thread, but we're still seeing issues that are quite similar to the ones described so far. We've had similar issues on BL460c Gen8 and now also on DL380p Gen8.The BL460c Gen8...
View ArticleRe: Adding new disk to P410i Controller using ACU
Another option is to replace the two 160gb (the ones in RAID-1) with bigger drives.You can replace them one at a time (allow array to rebuild inbetween).This will give you extra space in the array that...
View ArticleDL380 G7 Memory Installation
Hey, Can someone please let me know if the following configuration should be possible? Mixing dual and quad rank DIMMs, 16's are quad. I know each channel is limited to 2 quad rank DIMMs. Proc116 / 8 /...
View Article