Re: CPU Upgrade in DL160G8 question about VRM/PPM
I don't know, I think these resellers are wrong. From what I could tell, there's only one part # for the DL160 G8 system board. They don't have different ones for different processors... that really...
View ArticleRe: ProLiant DL160 G5 with E200 controller recoginzes not all physical drives
Yeah, I'd guess that maybe the optional backplane for drives 3 and 4 isn't present in the system.A quick look inside will answer for sure. See if the backplane is there and cables are running to it...
View ArticleRe: E200/64 array controller can not recognize 6G-10K-300G hard disk
When you remove the old drives, are you deleting the existing array first and then removing the drives? Or are you doing a "rolling update" by replacing one drive at a time to let it rebuild onto the...
View ArticleRe: DL380G5 Boot delay and hardware monitor issue
You might try running the server diagnostics at boot to see if anything is showing an error. When a server takes longer to POST than usual, it could be a sign that something's wrong and one of the...
View ArticleMemory Installation
HiI have a HP Proliant ML 370 G5 server. Please how can I install multi 4GB RAMs in one RAM board? And how can I install mix of 1GB with 4GB RAMs? And How can I install multi 1GB RAMs alone? Regards...
View ArticleRe: Intelligent Provisioning 1.60 breaks 2008 R2 install (will not accept...
I agree. If it ain't broke, don't fix it. Cause then you break it!
View ArticleAdding new disk to P410i Controller using ACU
Dear all, Hope someone can help. I have a DL380 G7 with P410i smart array controller. Initially we had 3 160GB disk installed. The first two are configured for Array A (RAID 1) and contain the...
View ArticleRe: Adding new disk to P410i Controller using ACU
If you don't have a cache module installed, you can only have 2 logical drives. Seehttp://h18004.www1.hp.com/products/quickspecs/13201_div/13201_div.pdf
View ArticleAmber PPM 2 light after a lightning
pls any one can help me,i have Proliant ML350, G5 server ...its automatically off ..when i was open the case ...PPM2 led light is amber..if i swich off the power and open again server its work after...
View ArticleRe: CN1100E 10GB Slow Uploads
superfast wrote:Just an update, we tried a CN1000Q card, Qlogic chipset, and performance was what we expected, over 200MB/s. The issue seems to be with the CN1100E, we have tried the latest firmware...
View ArticleUpgrade Order - SPP or OS First?
I have a ProLiant DL380P-G8 system running VMware 5.1.I have two sets of updates that need to be applied.1. The most recent HP firmware updates from the SPP disk.2. The VMware 5.1_u2 updates from the...
View ArticleRe: Memory Installation
Follow the memory population guidelines in the quickspecs for your server model. It will tell you what kinds of memory are allowed, how to populate them in what order, what kinds of memory can be...
View ArticleX1600(kinda a dl380 g6)
Hi i have a storeworks x1600 server looks like it s dl380 g6 but different mb layout anyway when it boots now it saying the maintaince switch is on, dose anyone know where is this maintaince switch...
View ArticleUPS guide for hp proliant ml350 g6
Hi, I have a HP Proliant ML350 G6 server. It has a single power suppliy (there is a sticker with 460W indication), 1T hard, 4GB RAM with Windows server 2012.I'm looking to purchase a UPS for this with...
View ArticleRe: Base System Device Driver Not Found
I'm also having this problem. Yellow mark on Base System Device in the system device. No sound, No Network adapter installed. Besides, i have not been able to install a network adapter driver. I use a...
View ArticleRe: X1600(kinda a dl380 g6)
If it's not really an HP server you're probably not going to get much help here on an HP server forum. :)My best advice would be to look on the system board itself to see if there's a row of obvious...
View ArticleRe: DL380G5 Boot delay and hardware monitor issue
Hi waaronb, after your suggestion, i find advisory c04258304 and after read it, i open support ticket in HP. Result: NIC (integrated in mainboard, in our server) must be replaced. There is no way to...
View ArticleDL180 G6 25SFF backplane dual expander ?
Hello,'can someone tell me if the DL180 G6 25SFF backplane is a dual expander ?There are two sff-8087 on the backplane but i can't find any information if this indicates dual expander ? i want to...
View ArticleRe: Upgrade Order - SPP or OS First?
No matter OS and HW: Allways update Drivers (or whatever you want to call it) first, then the HW. The driver is a translator between the HW and the OS. BR/jag
View ArticleRe: DL580 G3 & VMware 5.1 U1 - Enable 64bit OS Support & SAHF and LAHF support
All are running P38 which is the latest. I am going to try reflashing unit that is not operating. The SAHF & LAHF support was what I was looking to enable. But based on an VMware KB the CPU's...
View Article