Re: Proliant DL380 G3 (or g4, not sure), won't post, dead cache battery, do I...
Err, alright then. Well, it's a G4 not a G3, and, it's working again *shrugs*. Went there, set up the netbook to find out what the codes meant, turned it on and it works again no problem. No clue what...
View ArticleClik here to view.
Re: SPP 2014.02 + DL385 G7 + Win2008 R2 SP1 U1 = bad news
Anyone else experienced the error below? I have applied SPP 2014.06, but cp023518 failed. I tried cp023518 manually, but got the same error. ProLiant DL380 G7. Windows Server 2008 R2 + SP1. CheersRod
View ArticleRe: Performance issues with RemoteFX, what's wrong?
Hi,I have a different setup but the same issue. Did you ever figure out what the problem was? I have been searching everywhere for answers...Thanks,Seamus
View ArticleRe: Problems with Proliant DL560 Gen 8
Hi all,we have the same problem with 2 of 2 Proliant DL560 Gen 8 servers we just bought.Let us see what support will tell us next week!
View ArticleRe: ML 350 G5: Internal SAS Enclosure Device Failure (Bay 1, Box 1, Port 2I,...
Hi, i think you are right. It's possible that i had this phenomen already once, i don't remember exactly. The logs show nothing because the system was so busy that nothing has been logged. What can i...
View ArticleProLiant DL380 G5 USB ports not working
I recently started a new job in a school and found out that there is a HP Proliant DL380 G5 server that is not in use. I tried to connect to it however the system in missing a file and the USB ports...
View ArticleUpdating AssetTag in Instrumented BIOS
Hi All, In order to try to change the AssetTag in a Proliant Server I've entered in Powershell: $a=Get-WmiObject -Class “HP_SMBIOS_ProcessorInformation” –Namespace“root\HP\InstrumentedBIOS”$a.AssetTag...
View ArticleSD Boot with Gen8 (DL320e)
So,I wish to use SD boot for Windows and 3 Esxi hosts... but the 32GB HP SD cards are hideously expensive. Also the Sandisk cards seem MUCH faster for read/write performance than the HP branded...
View ArticleRe: SD Boot with Gen8 (DL320e)
Windows will see and install to the SD device without Intelligent Provisioning. iLO won't throw any codes or errors
View ArticleClik here to view.
Re: SD Boot with Gen8 (DL320e)
Hi Jimmy, thanks for your response!With a SanDisk or non HP SD card, how would it appear in the ILO dialog above? Would you get a red X instead of a green tick, and would the SD write counter still...
View ArticlePredictive Failure
Hello everyoneHere's a report made by ACU . Last week we repleaced two faild disk of our four disks (member of RAID 5) but then , two other health disks start to blink in amber . ACU says there's not...
View ArticleRe: Predictive Failure
It looked like 2 of your drives are reporting predictive failure:Smart Array P410i in Embedded Slot : Internal Drive Cage at Port 1I : Box 1 : Drive Cage on Port 1I : Physical Drive 1I:1:1 : Physical...
View ArticleRe: Predictive Failure
No error found on ADU :) Whiwh OS is installed on this server? you need to update the firmware of P410i ;)
View ArticleRe: FWBC on Proliant DL380 G8 - P420i
Now I understand it :) so Write cache on my server is already enebled and I set ratio 70% write and 30% read.The other option write-through cache I leave it disable. Thanks very much
View ArticleRe: Predictive Failure
Weird. I assume it rebuilt the array okay after replacing the failed drives?You could try powering the system down and then start up again. Doing a power cycle will sometimes clear up drive alerts for...
View ArticleRe: Updating AssetTag in Instrumented BIOS
Hi! I don't know if its that same Asset tag that you are speaking of, but HP has release a HP scripting toolkit for windows powershell that contains a CMDLet thats called set-hpiloassettag that has the...
View ArticleML350p G8 - Fan Noise
Hello All, We took delviery of a brand new ML350p G8 last week, and ever since have been inundated with complaints of noise! We've run the latest SPP etc through the server and still the fans sit at...
View Article