Re: ProLiant DL380 G5 USB ports not working
Yes, this could be true however, I cannot enable it since I can't use an USB keyboard. I will try to use an old style PS2 port on the back...
View ArticleHP ProLiant DL180 G6 2 NICs connected to Cisco2960S-Stack caused network...
hello, I am a network engineer and not server admin. Just want to understand how it is possible. Our server admin just installed a new HP ProLiant DL180 G6, connected 2 ethernet ports to...
View ArticleRe: bugcode_usbdriver blue screen
I have the same problem. I just don't know what's happening in the server.I don't have the firmware CD so I'm asking is there another way of updating firmware? is it downloadable? Thanks in advance
View ArticleRe: ML350p G8 - Fan Noise
HiWhich version of the SPP you used, the latest is 2014.06.0 Try to run offline diagnostice from the SPP cd and see if any errors detected on the fans or other sensors, also attache it here if possible.
View ArticleRe: ML350p G8 - Fan Noise
Are all the fans at 33%, or are there maybe one or two running even faster?If they're all at 33% or so and the noise is too much, there's not much you can do. HP servers are loud even when the fans are...
View ArticleRe: HP ProLiant DL180 G6 2 NICs connected to Cisco2960S-Stack caused network...
Without knowing more about how the server NICs were setup exactly, it sounds like a loop.Try removing portfast from the IOS config on those ports. That's nice to have if you're 100% positive that a...
View ArticleRe: ProLiant DL380 G5 USB ports not working
If you have the lights out setup, you can go into the BIOS during boot using the remote console.At any rate, you're probably going to find it easier to reset the NVRAM. Who knows what other non-default...
View ArticleRe: ML350p G8 - Fan Noise
B***S*** Look at the internet, several similar problems exist, so far no real answer found yet... HP? I have 5 servers here ML350p Gen8. 4 of them are completely silent with fans around 20%, 1 of them...
View ArticleHP Proliant ML350p Gen 8 Micro Server for office LAN
Hello, we have an HP Proliant ML350p Gen 8 Micro Server with 4 Cores, Intel Xeon E5-2609 Processor, 2.40 GHZ speed, 3TB, HDD capacity. The OS is Multipoint Server Premium 2012. Initially it was to be...
View ArticleRe: Boot Logical Drive is Configured but is missing or Offline
Thank you Hossein. After motherboard replacement, I had the "Boot Logical Drive is Configured but is missing or Offline" error and your steps resolved the issue. Server can boot the OS now!
View ArticleRe: RAID 5 Configuration with 1 hot spare - 2 drives flashing amber - what to...
Amber flshing once per second means prefailure warning - the disk still works, but has already errors and will fail soon. Replace it ASAP. Use ACU to get the current status of the disks.
View ArticleServer 2012R2 WDS PXE-E55: proxyDHCP service did not reply to request on port...
Built new WDS on platform to include DHCP and DNS. Imported Boot and Install images from previous WDS hosted on DL360G5. Came across this issue when trying to pxe and image new OOTB HP Elitebook 840 G1...
View ArticleRe: RAID 5 Configuration with 1 hot spare - 2 drives flashing amber - what to...
TorstenThank you - but there are two flashing amber - should I replace the two at once or one at a time?
View ArticleML370 G6 Randomly rebooting
Hello, I have an ML370 G6 with a Xeon E5620 running SBS 2011 x64 that has been consistently rebooting at random times. I checked the logs and have found that it's a consistent stop error code: 0x07F...
View ArticleRe: RAID 5 Configuration with 1 hot spare - 2 drives flashing amber - what to...
One at a time, if you need your data ... ;)
View ArticleRe: RAID 5 Configuration with 1 hot spare - 2 drives flashing amber - what to...
FYI, a hot spare will jump into the array if one of the drives in that array fails. Until then, it's essentially powered down.Once a drive in an array fails, that hot spare spins up and the redundant...
View ArticleRe: ML370 G6 Randomly rebooting
Stop errors could also be caused by bad memory, a buggy driver, heat related issues causing problems, etc.You could look at when these problems started and see what changes were made before that. Any...
View ArticleRe: Graphic adapter for HP DL380p G8 Server
Any adapter should work okay. Make sure you use the appropriate PCI slot for whatever adapter you chose (x8 or x16).If you're looking for an official HP option, go here and look up the part number for...
View ArticleRe: HP Proliant ML350p Gen 8 Micro Server for office LAN
Yeah, it seems like 30 multipoint users on a E5-2609 based server would be tough.See how it does with 3 users... is it doing okay? Could it handle 10 times the load? (memory, CPU, I/O)? I'm a bit...
View ArticleRe: ML350p G8 - Fan Noise
Fortunately most people who buy servers don't have them where people are sitting and working... they get stuffed into server rooms where any amount of noise they put out is drowned out by the deafening...
View Article