Clik here to view.
Re: Blue Screen Trap (BugCheck, STOP: 0x000000D1 (0xF752D000, 0x00000002,...
I am getting the below error in My AIO1200 and the SAN gets Blue screen @ times once we reboot everthing works fine. can any one giude me the solution please find the LOGS attached POST Error:...
View ArticleNo Link on 82571EB Gigabit Ethenet Controller
Hi, my 82571EB Ethernet Nic has two ports. But just the first interface has a link! BIOS and Xenserver shows both NICs, so it seems to work... "Has Link" means, the LEDs are blinking. When doing a...
View ArticleRe: RAID 5 Configuration with 1 hot spare - 2 drives flashing amber - what to...
Thanks Waaronb - that is exactly what i needed to know. I have 2 disks arriving today so hopefully it will all go well. Thank you for your info.
View ArticleRe: No Link on 82571EB Gigabit Ethenet Controller
Forget about it, sorry... Just had to wait about 2 hours - no idea why.Now it works. Normally I am used that plugin in a cable works immediatly. Regards,mho
View ArticleUnable to HP Service Pack for ProLiant With Active Care Packs
Hello, I have my servers Care Packs registered with my account but I am unable to download the HP Service Pack for ProLiant (SPP) Version 2014.06.0. I click on the Obtain software button and it sends...
View ArticleDL380 G5 Riser Bus Unresponsive
Good morning, This is my first time posting to the forums, so I apologize if I miss any necessary information, but here it goes: We have a ProLiant DL380 G5 server that is being used to host all of our...
View ArticleRe: Unable to HP Service Pack for ProLiant With Active Care Packs
I had the same issue today as well... Seems that there are website issues... Called HP support but they had no idea how long it would take...I send also a message to the HP Support Center web team but...
View ArticleRe: ML350p G8 - Fan Noise
I Had the same problem - it was solved by installing at least one HP hard drive. I tried using a 2.5 inch third part hard drive and it caused the fan behind the drive array to ramp up to 30% again....
View ArticleRe: ML350p and 2nd Media Bay Cage Kit
Reading the QuickSpecs, you can not mix LFF and SFF cages on the same controller (expansion cages, daisy chained).
View ArticleESXi 5.5 VMDirectPath 'workaround' mentioned in Customer Advisory c03835455
Hello, I have read about the limitation of not being able to use VMDirectPath with ESXi 5.5 and HP ProLiant servers, other than with graphics cards. The customer advisory that mentions this is...
View ArticleProliant ML110 G3 - Smart Array E200 (Ready for Recovery)
Hi, I'm having problem trying to re-build my RAID 5 array, one of my HDD went bad so I replaced it with a new same capacity HDD, at 1st it initialize until 100% then just sits there saying "Ready for...
View ArticleRe: Unable to HP Service Pack for ProLiant With Active Care Packs
We are having this exact same issue. Has anyone been able to get past the redirect page? Or any news on when it will be solved?
View ArticleRe: Using Powershell for ILO to set ILO IPv6 Parameters?
Did you find a solution to this? I am also looking at how to modify the IPv6 settings.
View ArticleRe: iLo4 and 'alertmail'
I'm getting this is if try to configure it to work with a linux email server: 2014-07-11 14:05:55.069224500 1157 tls plugin (init): ciphers: HIGH:!SSLv22014-07-11 14:05:55.072548500 1157 tls plugin...
View ArticleRe: iLo4 and 'alertmail'
It sounds like the ILO isn't waiting for the server message, whatever it might be, before sending stuff. Normally that would be a sign of some spambot, but in this case it seems like the SMTP sender...
View ArticleRe: Unable to HP Service Pack for ProLiant With Active Care Packs
ftp://ftp.hp.com/pub/softlib2/software1/cd-generic/p1513074441/v99186/SPP2014060.2014_0618.4.iso
View ArticleRe: Proliant ML110 G3 - Smart Array E200 (Ready for Recovery)
I saw this in the report:Rebuild Aborted From Read ErrorWhen I looked at the status of the 5 drives, 2 of them show their last failure reason as "hot removed"... did 2 drives get pulled out by mistake...
View ArticleRe: Unable to HP Service Pack for ProLiant With Active Care Pack
Here is the answer I got today from the HP Support website team: We kindly inform you that our Development Team have isolated the issue and it has been escalated to get fixed as a priority. We will let...
View Article