Re: DL380 G5 Riser Bus Unresponsive
Thanks for the response. We actually did try other cards in the x8 slots, and they didn't work either. We swapped out the riser card entirely, and the issue still arose. My guess is that this has to do...
View ArticleRe: Intelligent provisioning does not start...
AlecKeeler wrote:Does this mean you think that the machine has been shipped without it installed ? This is a brand new server just received from HP.I thought they no longer ship the SmartStart CD with...
View ArticleRe: Using Powershell for ILO to set ILO IPv6 Parameters?
Hi Andrew, that sounds like a workable solution. if you dont mind, can you share the code and which files you modified? I would certainly appreciate it and maybe the HP guys can adopt the code in the...
View ArticleRe: DL785 G6 Windows 2012?
Hi, Windows Server 2012 is supported on G7 and above servers.G6 and below servers are not supported.http://h17007.www1.hp.com/us/en/enterprise/servers/supportmatrix/windows.aspx Thank You!I am a HP...
View ArticleHP ML 350 G8 SERVER fan issue
HP ML 350 G8 SERVER fan making loud noise. Made thermal configuration in RBSU to " optimal cooling " but same issue. We have 6 other HP ML 350 G8 servers in different sites which works fine. Please help.
View ArticleP222 Smart Array in Gen6 DL180?
Hello guys, I've had a look at the documentation, but it does not specifically help. What I'd like to know is if I can run a P222 Smart Array with an older Gen6 DL180 (8 x 3.5" drives in R10). We are...
View ArticleMemory Upgrade
I have HP Proliant DL380G6 with 12 gb memory (6 pieces of 2 gb). P/n 500202-061.Could i add 2 pieces of HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 ?Will it work?
View ArticleRe: DL785 G6 Windows 2012?
Thats not correct, DL 360 G6 and DL380 G6 are supported if you go to "previous servers" so why not these **bleep** DL785?
View ArticleRe: Proliant ML110 G3 - Smart Array E200 (Ready for Recovery)
According to me Disk 4 (1l:1:4) is causing the problem of not rebuilding of the new disk 5 (2l:1:5). Check: Monitor and Performance Statistics (Since Factory) High number of Read Errors Whenever in an...
View ArticleP420i Raid Controller not showing in SNMP or HP SMH on DL380p Gen 8 Server
I've just come across a Hyper-V Host Server that seems to be setup exactly the same as the other servers at this particular site. The only difference is that the physical disks don't show up in the HP...
View Article350 g6 overtemp?
I have a number of ml350g 6 that will click on and imedietly back off. led on systemboard looks like it is the overtempeture error. installed are known working cpu, memory fans etc. all parts including...
View ArticleRe: Memory Upgrade
yes, match them in d assuming you are using 2 processors, if using one it should work in g,h
View ArticleRe: DL380G5 and HP LSI Ultra 320 Scsi
I have the same problem, but then on a Windows 2012 R2 with a SC11Xe HBA and LTO Ultrium-4 SCSI tapedrive.We are making back-ups with ArcServe every night at around 23:00. Out of a week we have 3 or...
View ArticleRe: DL380 G5 Riser Bus Unresponsive
there are two risers for that machine. 408788-001 is pci-e/pci-x 408786-001 is just pci-e if that helps any, didn't have time to look into the specs, but something to start with, good luck
View ArticleRe: DL785 G6 Windows 2012?
Hi, I am not aware of the technicalaties about processor and RAM.DL785 being AMD, I guess that processor does not support Windows 2012. This is what I think, the processors and RAM may not support...
View ArticleRe: HP ML 350 G8 SERVER fan issue
Hi, Two things you need to check:1. BIOS, iLO4 and Controller firmware is the same on all the servers, the one making noise and the others which are not making noise?2. On the noisey server, have you...
View ArticleRe: 350 g6 overtemp?
Hi, Please refer to these articles, this might help. PCI-X Riser Option Kit Installation May Result in High Speed Fan Noise After Power-On Self-Test (POST)Server Fans Always Run at High Speed and Make...
View ArticleRe: HP ProLiant DL360p Gen8 748301-S01
The fastest speed that server can support are the 1866 speed and that's what comes with that model, so you'll want to stick with 1866 modules. Otherwise it'll knock down to 1600 MHz.If speed is your...
View ArticleRe: ML350 G5 won't boot, red internal health LED, undocumented system board...
Hi Buddy, I did everything as you have mentioned but still didnt work. it boots only if i place a ram on the 4D, but then it gives a ram erorr and then i get a message system halted, could you please...
View ArticleRe: ML350 G5 won't boot, red internal health LED, undocumented system board...
Actually my server was turned off from last 2 years and now today i have started.
View Article