Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Browsing all 30225 articles
Browse latest View live

iLO 4 - AlertMail - Detailed Event List

I am looking for a detailed/exaustive list of events that trigger AlertMail to send an e-mail alert. HP tech support said the AlertMail is triggered by the same events that are recorded in Integrated...

View Article


Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

I have an older ML350 with an e200i and a 128 MB cache module with a failed battery.  Yellow light flashing on the BBWC and the ADU reporting battery failure. When the battery failed, I bought a new...

View Article


Re: Upgrade firmware - operating system

Hi, For Firmware's it does not matter which OS.If you can execute the firmware file from VMware then download the file which is compatible with VMware, if not download Windows OS version firmware....

View Article

Re: HP Insight Diagnostics Online Edition with Prolinat Gen8

Hi, Its always advised to perform diagnostics when there is no OS loaded.But for some reasons you cannot bring the server down, then you may download HPS Report for Windows OS and perform the...

View Article

Re: ProLiant DL380 Gen5 iLO 2 Remote Console graphics problem - Help!

Hi, This article should help. Thank You!I am a HP employee.

View Article


Re: Proliant DL180 G6 Wont boot

Hi, Either the admin at that place has deleted the data or formatted the hard drive before handing it over OR there may be some loose connections within the server. Power off the server and reseat all...

View Article

Re: iLO 4 firmware v1.51 & OpenSSL 'ChangeCipherSpec' MiTM Vulnerability

I am having the same problem but I cannot fin any update on the HP website regarding this. I guess we'll need to wait for HP to release a new firmware for iLO4. Btw, I am running 1.51 too. 

View Article

Re: ProLiant DL380 Gen5 iLO 2 Remote Console graphics problem - Help!

Great info Suman_1978 I appreciate it. It look almost identical to my issue. I have to try it when I down the server next. And report back.Thanks!

View Article


Re: DL380p g8 with p420i RAID controller

Hi Waaronb, Many thanks for your response. I was able to ad the drives and expand the array via hpsscli. ESXi 5.5 was also able (without downtime) to increase it's datastore. Regards,Rick

View Article


Re: iLO 4 firmware v1.51 & OpenSSL 'ChangeCipherSpec' MiTM Vulnerability

Quick question. Do your iLOs have the self-signed SSL certificate that iLO automatically creates or you have replaced the self-signed certs with your own 'valid' SSL certificates?

View Article

Re: Proliant DL180 G6 Wont boot

Thanks for the reply!  I have checked all the cables and seated the HD's.  Like I said before, all the disks seem to check out.  No errors reported, all green lights, and the RAID software is reporting...

View Article

Re: Proliant DL180 G6 Wont boot

PS. How do I clear the NVRAM?

View Article

Re: Linux KVM and assigning devices to a VM, PCI cards or SR-IOV

Ken ML110 Gen7 and ML310e Gen8  are not SR-IOV Compliant and DL380 Gen8 is SR-IOV Compliant, look the paper in table...

View Article


New disk for HP ML350 G5/E200i

Hi everyone! I have a Proliant ML350 G5 SFF version with E200i controller. I need a newdriveto replaceone thatis brokenandI canbuy themodelDG0300FARVVDual-PortSASSpare#507284-001.According to...

View Article

Proliant DL320e Gen8

Hello, I have a Proliant DL320e Gen8 server that I just received 4 SAS hard drives for. I have found different reports as to whether or not this server requires a SAS controller or that they support...

View Article


Re: HP Proliant DL380 G5 NIC's not found after firmware update

Hello I would like the .iso so that I can fix the bricked nics Thanks,Caz

View Article

Re: Proliant DL180 G6 Wont boot

Hi, Refer to this article on clearing NVRAM/Resetting server to default configuration. By the way which utility are you using to check the Raid/hard drive configuration outside OS? Thank You!I am a HP...

View Article


Re: Proliant DL320e Gen8

Hi, Refer to the server QuickSpecs.NOTE: All 6G SATA/SAS Drives listed in HDD section are tested and supported for both 3G and 6G speed. A HP Smart Array Controller is required for 6G HDD. According to...

View Article

Re: msa 60 latest firmware...

Hi, Here are the links for SC44Ge and MSA60.Select the OS thats installed on the Server and download the appropriate firmware. Thank You!I am a HP employee__________________________________________Was...

View Article

Re: Proliant DL320e Gen8

The DL320e Gen8 ships with an embedded B120i RAID controller. This controller is SATA only. If you need a SAS RAID controller you need one of the optional "P" series Smart Array controllers.  HP Smart...

View Article
Browsing all 30225 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>