Re: Upgrade firmware - operating system
Thanks. I've upgraded firmware ilo from xp machnie via web. I've downloaded firmware for windows extracted with 7zip. There was *.bin file which I uploaded to server.Everything ok. I was thinking it is...
View ArticleRe: increase disk space in RAID 5
What kind of disk controller do you have in that server? Normally, with a SmartArray controller you can just install one by one the new bigger disks (replace on of the 300G with a 600G, wait for the...
View ArticleRe: Upgrade firmware - operating system
There are many ways to do an upgrade, from the running OS (even remote) or from the ILO directly. From the OS you have several tools to deploy the firmware (HP SUM based, e.g.), from ILO directly you...
View ArticleRe: Updating AssetTag in Instrumented BIOS
Many thanks Cederberg! Haven't resolved this yet, but your advise has moved me closer and provided some pretty useful powershell commands to boot. Now after installing the HP PS commands, I enter the...
View ArticleRe: Updating AssetTag in Instrumented BIOS
Just an update on the above, I think I've found what the issue is with the above, I believe that what is prevention my write to the AssetTag are the ILo permissons on the device in question, apparently...
View Articlecan´t run Hyper-V on dl385g7 with 2 x12core AMD CPU
Dear all, I have a server dl385 g7 with 2 AMD CPUs and i can´t run Hyper-V, what´s wrong? I enabled the functionalities for it on the BIOS as recommended but still giving me the error. What it´s the...
View ArticleRe: Setup IPMI on HP DL 380 G8
Your IP address and gateway are setup incorrectly. Verify your gateway IP address, likely 192.168.1.1, and the IP's you want for the servers. Would suggest using 192.168.1.10 and 192.168.1.11, but it...
View ArticleRe: Proliant DL360 G8 & Server 2012R2
Was hanging on this for about 4 days (2012R2 @ 360e Gen8 + B320i), but finally have solved it! Original solution is here - yeah, it's all the 2012R2 update about. So boot your server with pressing F8...
View ArticleRe: HP Proliant DL380 G6 with HP 1.28TB Multi Level Cell PCIe ioDrive Duo
Hello Suman, Thank you for your reply! Please see here, seems that the slot doesn't support the requested power:~ # fio-pci-checkRoot Bridge PCIe 2000 MB/sec needed max ioDrive 00:13.0 (1005)...
View ArticleRe: Workaround
Thank you Giancarlo, your solution works like a charmGiancarlo Zicchieri wrote:Hi I solved the issue modifying with notepad the file c:\autounattend.xmlWhen it appears the command prompt digit notepad...
View ArticleRe: New disk for HP ML350 G5/E200i
no reason that won't work. it is compatible. you may need to run the 10.10 firmware to avoid a message about upgrading the firmware when you get to controller in bios, but the drive will work
View Article3TB disks on P400 - what happens when I upgrade to P410?
I have a DL185 G5 with (8) 3TB disks arranged in a RAID 5 array. The controller only is able to use up to 2 TB disks, it detects the disks as 2TB each and built the array as if they were 2 TB disks. It...
View ArticleRe: ML110 G5 CPU E2160: fan permanently full speed
Hello,I had the sane problem after upgrading BIOS to 2010 verson.Problem solved with SP49103 (Remote Management FW). Hope this help !
View ArticleRe: 3TB disks on P400 - what happens when I upgrade to P410?
Hi, According to the QuickSpecs for P400, it support upto 2TB physical disk and P410 supports upto 3TB physical disk and DL185 G5 supports both the controllers. As per the QuickSpecs the P410 should...
View ArticleRe: can´t run Hyper-V on dl385g7 with 2 x12core AMD CPU
Hi, What is the operating system and processor model on this server?Check out this article and this. Thank You!I am a HP employee.
View ArticleRe: increase disk space in RAID 5
"Normally, with a SmartArray controller you can just install one by one the new bigger disks (replace on of the 300G with a 600G, wait for the array to rebuild, then replace the next one and so on) -...
View ArticleRe: iLO 4 firmware v1.51 & OpenSSL 'ChangeCipherSpec' MiTM Vulnerability
I have the self-signed SSL certificate that iLO creates by default.
View ArticleVM ESXI ON HP DL120 G7
hello to all,I have installed VMware ESXi 5.0 u3 (HP version) on to my HP Proliant DL120 G7. I have got 3 HDDs on my server at the moment, but only one of them is recognized (2.jpg). All other...
View ArticleHP iLO4 not working
Hi guys, I hope you can help me with my problem. I tried to configure the HP iLO 4 on our HP Proliant ML 350P Gen 8. During the startup process, I can see the IP Address that I have set but I could...
View Article