Re: can´t run Hyper-V on dl385g7 with 2 x12core AMD CPU
Hi,OS: Windows Server 2008 R2 Enterprise - SP1CPU: AMD Opteron 6238 2.60Ghz (2 Processors)Regards,Nelson Chamba
View ArticleRe: can´t run Hyper-V on dl385g7 with 2 x12core AMD CPU
Done folks,Installed the patch and it´s running.regards,Nelson Chamba\
View ArticleRe: iLO 4 firmware v1.51 & OpenSSL 'ChangeCipherSpec' MiTM Vulnerability
If you have the default self-signed SSL certificate then, you are vulnerable to MiMT attacks no matter what. So, if you are really into securing your environment, please get those self-signed SSL...
View ArticleRe: VM ESXI ON HP DL120 G7
What model is the drive the system can see, and what is the info on the drives not being recognized
View ArticleRe: DL380p Gen8 incompatible with SAS expander? Smart Array P822?
Hello, I too purchased two Gen8 DL380ps with the P822 controllers and have the same exact issue of spanning anything across both drive cages. I've spent tons of time with HP support and bottom line, no...
View ArticleRe: DL380p Gen8 incompatible with SAS expander? Smart Array P822?
The 25SFF chassis Just Worked for me. IIRC 12 of the bays map to one HBA channel and 13 to the other. There is/was an option for an additional two drive bays to stick in the second PCI bay in the...
View ArticleRe: Memory Upgrade
Hi I agree, you should be able to add this memory - provided these part numbers match your existing memory. Here's a maintenance and service guide that tells you how to verify the correct kit and...
View ArticleRe: Help me with hardware Upgrade
Hi I've been researching this question for you, but I I don't have a definitive answer yet. I'd like to connect you with one of our sales experts, as they have more details on these products and can...
View ArticleRe: HP iLO4 not working
If your switch isn't reporting a link on the ILO connection, it's probably not connected. It could be a duplex or speed mismatch. If it's a managed switch you might log in and check the status of that...
View ArticleRe: increase disk space in RAID 5
opg70 is correct. You really can replace one drive at a time with a larger model. Wait for it to rebuild each time, of course, before doing another one.Once all 4 drives are replaced with 600GB drives,...
View ArticleRe: 3TB disks on P400 - what happens when I upgrade to P410?
Fortunately the drivers for the P400 and P410 should be compatible and the OS will boot after the update.I'm not entirely sure what would happen because the new P410 can see all 3 TB. I'd like to say...
View ArticleML150 G6 hardware waring light flashing and beep code so will not boot ESXi
So I have 2 HP ML150g6's in a ESXi cluster. Node 2 died on me today, went to login via vSphere client and did not respond and had just powered up a bit before so check server and red light flashing....
View ArticleRe: VM ESXI ON HP DL120 G7
VMware is not going to care about the kind of disk but the disk controller it will. You woudl want to figure out where the workign disk is attached and make sure it sees the other attached there though...
View ArticleFalse over heat shutdown issues multiple HP DL380eG8 hard drives
We have 3 servers with over temp shutdownsall Temp sensor 122 servers had drives that have reported overheat conditions both bay 251 of these after replacing bay 25 bay 22 started reporting over heat...
View ArticleProLiant ML110 G7 - SuperSpeed 3.0 PCIe Card driver not installing
I recently purchased a SuperSpeed USB 3.0 PCI-Express Card (product number FG-EU307A-4-BC01) for my Proliant ML110 G7 server. I was assured by the seller that the card is compatible with my server....
View ArticleDL360 G2: black screen, does not POST
Hi there, I have a DL360 G2 which does not POST and does not show video output. What I checked: - no amber LEDs, all LEDs are green- NVRAM erased on power up by dip switch- removed memory and second...
View ArticleRe: ML150 G6 hardware waring light flashing and beep code so will not boot ESXi
Maybe it's one of the CPUs since the memory all tested okay. Not posting at all and just beeping when it starts up is usually going to be the memory or CPU... just about everything else will at least...
View ArticleRe: DL360 G2: black screen, does not POST
Have you connected to ILO from the time it powers up to see if it's showing anything at all? I wonder if it's doing something and starting to POST, but the graphics adapter isn't working right (or...
View ArticleRe: DL360 G2: black screen, does not POST
Where you watching the console in iLO from the moment you pwoered on the server? Did you try a different monitor? If you've done that, then yes another graphics card would be the next test
View ArticleRe: HP iLO4 not working
Thank you and I really appreciate your suggestion. I am using HP V1910 switch and I already used a different cable and connected to a different switch. If i am not mistaken, it is on automatic. All my...
View Article