Re: ML110 G7 can't see additional drive
The 250Gig is the drive that came with the computer. Both drives are HP. How do I detect the drives in BIOS? Can't find where the HP BIOS shows the drives - Del, Esc, F9, F12 etc?
View ArticleRe: Is there any way to add SSDs to my DL585 G2?
Refer to section “Standard Features > Expansion Slots” of the server’s QuickSpecs for the PCIe slot specification, such as speed (‘Width’) and connector (‘Connector Width’) to check if the card in...
View ArticleRe: can't upgrade iLO on DL580 G7
Greate :) >Tarun Jain, If you can connect to the ILo, there's reset option in the ILo administration. It hasn't allways been there, but it is now. In the past we changed network paramters, to force...
View ArticleRe: DL580 G4 memory board rebuild error
It can't be board failure, because they both work in backplane slot 2. The one which is inserted in slot 1 (does not matter which one) doesn't work. So if it is a component failure, it can be memory...
View ArticleRe: HP DL585 G2 Upgraded CPUs Won't Boot
Hi, These CPU's should work fine in your system I have 4 x 8389 CPU's in my DL585G2 system with 16GB of DDR2-667 and they work fine. Are your CPU's known good cpu's? it could be that they are faulty. I...
View ArticleRaid 10 with 4 hd which can be replaced?
Good morning,I have a smart array 6400 with 4 hd configured in raid 10, 2 hd on channel 1 and two hd on channel 2.I would like to create a sort of backup replacing the machine off two of the 4 hd and...
View ArticleRe: Is there any way to add SSDs to my DL585 G2?
Hi, yes you can use SSD's with no issues. I currently run 4 x Corsair Force 256MB 6G SATA SSD's in the std backplane. There are a couple of caveats though: 1: Unless you upgrade from the default P400...
View ArticleRe: Retired servers
I upgraded my ML350 G3 from Windows 2003 R2 to Windows 2008 32-bit and it is running fine. I wasn't aware that any required drivers were not available.
View ArticleML370 G4: Will Windows recognize data arrays after OS array is changed?
Server: ML370 G4 with Smart Array 642 controllersRAID Configuration:Controller 1 - two mirrored drives - C: (Windows 2003 R2 32-bit installed)Controller 2 - two pairs of mirrored drives - D: and E:...
View ArticleDL380 G8 HP SUM Updates Not Complete
We're finding that for DL380 G8 servers running Windows, when we run HP SUM, choose to get updates from the HP FTP site, that not all updates are being presented. We've had to manually install firmware...
View ArticleAny way to connect status/activity LEDs from Areca ARC-1160 to ML150 G2 SATA...
The documentation for the Areca ARC-1160 is quite detailed regarding status and activity LED connections, but I can't find any documentation for the connections on the hot swap SATA backplane in the...
View ArticleDL380 G7 display driver for Windows Server 2012
now it run at 1024 x 768 at 64hz, not fully fit i want it at 1280 x 1024 at 60hz i cannot find driver for it any help
View ArticleRe: Remote Insight interface error. .1.3.6.1.4.1.232.0.9006 nterface error
One thing I have noticed now is that after applying the updates both servers are reporting a warning in System Center. The Warning is ServerOthers_SNMP.HealthState HealthWarning and I also see...
View ArticleRe: Remote Insight interface error. .1.3.6.1.4.1.232.0.9006 nterface error
Ah solved it and it was unrelated :)
View ArticleDL380p G8 with all latest driver and firmware LAG of Server 08R2?
Hi all, My company bought the latest DL380p G8 with 16G RAM, E5-2620 CPU. 6x 300G SAS 10K Ent2x 300G running RAID 1 with Array A on 420i with 1G FBBC4X 300G running RAID 10 with Array B on 420i with 1G...
View ArticleRe: Firmware update on enterprise HDDs
Ok. Installing CentOS directly on the hardware seems to have worked, I've managed to upgrade the VB0250EAVER and EF0300FATFD discs to the latest firmware (all discs connected to the P410). Pretty...
View ArticleRe: Remote Insight interface error. .1.3.6.1.4.1.232.0.9006 nterface error
Please keep us updated with the results. BTW, the iLO3 1.57 is no different than the version 1.55 on this regard. It is being released mainly to solve the DL980 false overtemp issue.
View ArticleRe: DL360 G7 not showing new drives in slots 5 & 6
I have the same issue. It does not recognize drive 5 & 6. Can I disable the CD drive I have and make it recognize drive 5 and 6?Jennifer Nordeng wrote:I just added 2 new drives to my 2 DL360G7...
View Article