Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Browsing all 30225 articles
Browse latest View live

E200i error code 724: RAID level not supported in the current configuration

Hi all,I'm trying to figure out if I have a problem on a HP ML350 server RAID controller.This server has the E200i controller with two disk in RAID1 (at least this is what I belived until today) and...

View Article


Re: E200i error code 724: RAID level not supported in the current configuration

Did you insert the (used) disks while the server was powered off? >> A drive array which had an ADG volume on it was moved to a controller that does not support ADG Warning  

View Article


Re: E200i error code 724: RAID level not supported in the current configuration

Thank you for reply. Yes I added the new disks with server power off. I can't clear understand the quote ">> A drive array which had an ADG volume on it was moved to a controller that does not...

View Article

Please issue a DL320e Gen8 V2 firmware update for new CPU support

Newest Haswell Refresh Intel CPUs like Pentium G3258 are not supported by current DL320e Gen8 V2 firmware.Seems what a server's firmware must be updated to include these new chips (Haswell Refresh).At...

View Article

DL180 G6 and ESXi 5.5

Hello! I know that the latest supported version is "VMware ESXi 5.1.0 Update2 1483097 HP".But I'm going to try installing "VMware ESXi 5.5 Installable HP Customized ISO Image" on DL180 G6 with HP...

View Article


Re: E200i error code 724: RAID level not supported in the current configuration

I found this file: HP ProLiant Servers Troubleshooting Guide http://h10032.www1.hp.com/ctg/Manual/c00300504.pdf At the page 113 my error is reported: Controller State: The array controller contains one...

View Article

Re: E200i error code 724: RAID level not supported in the current configuration

I think what Torsten is saying is that the 2 new disks you added probably came from another server, and those 2 drives had been part of an array with ADG or something else that the E200i doesn't...

View Article

Re: Please issue a DL320e Gen8 V2 firmware update for new CPU support

Regarding Haswell "refresh", it has long been expected that BIOS for any system would need a BIOS update, so that's not too surprising.... if they would even work at all (LGA 2011 compared to LGA...

View Article


Re: E200i error code 724: RAID level not supported in the current configuration

They are two brand new disks bought directly from HP.My concern is expecially about the two old disks.How can I know if the messages is for the old disks or for the new disk?

View Article


Re: HP Turbo Z Drive on ProLaint ML350

Still nobody :( Someone interested in the result when I try the Z-Drive in my HP ProLiant ML350 Gen8?

View Article

Re: HP ProLiant DL 180 G6 P410 RAID recovering stuck at 1%

Hi, Finally I will change the hard drive for a new one on warranty. I will come back to keep you in touch. Best regards.

View Article

Re: Please issue a DL320e Gen8 V2 firmware update for new CPU support

Haswell Refresh should be hardware compatible with current 1150 boards.Many vendors already released HW-R support for their systems...

View Article

Re: Setting Up RAID

Hi, Have you already configured RAID? Its been a week and no replies. Have you thought of RAID 5 with 5 disks and sixth disk as Hot Spare? Thank You!I am a HP employee.

View Article


Re: HP DL460c G6 server

Hi, Other than RHEL, have you tried installing Windows OS, just to make sure server hardware is working as designed.BL460c G6 supports the follows RHEL versions:RHEL 6.0RHEL 5.3RHEL 4.8 (Intel Xeon...

View Article

Re: HP server firmware upgrade failed?

Hi, Firmware update may get stuck in some cases due to hardware or firmware issues.If the server is hung, then you have to reboot the server, there is no other go.It may damage the hardware on which it...

View Article


Re: How to roaming the SSD in ProLiant Geni

Hi, What type of SSD are these and what is the SmartArray controller installed on this DL380p Gen8?What is the error message that appears on screen, when you say "hard drive not found"? Thank You!I am...

View Article

Re: HP SPP 2/14 Hanging while loading

Resolved my problem today. I updated teh server first with firmware DVD 10.10. After it was possible to update to SPP 2014_02_0B. Hope this helps. regards/danny

View Article


Problem installing SPP

I have a ML350e Gen 8 Server with SBS2011, which has several drivers missing, I was advised to download and apply Spp2014. I have downloaded SPP 2014 and created the DVD I Launch Start.htmI select the...

View Article

Re: Problem installing SPP

Go to folder CD Drive -  E:\hp\swpackages and select your OS (x86 or x64), on my case I use x64, then run hpsum_bin_x64.exe as admin and start the update process. Hope this help. Regards,

View Article

Re: Problem installing SPP

Thank you, I have to say the instructions on the DVD just are not clear. 

View Article
Browsing all 30225 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>