Re: HP ProLiant DL 180 G6 P410 RAID recovering stuck at 1%
Hi!Are both logical drives stuck at x % ? You have two logical drives and from ADU it looks like #1 is rebuilding and the second one is queued. For LD2:Drive Rebuilding 0x00For LD1:Drive Rebuilding...
View ArticleRe: iLO Help
All running linux?lspci -v two examples: 01:00.2 System peripheral: Hewlett-Packard Company iLO3 Management Processor Support and Messaging (rev 05) Subsystem: Hewlett-Packard Company Device 3381...
View ArticleRe: HP ProLiant DL 180 G6 P410 RAID recovering stuck at 1%
Hi, I only have the first logical drive stuck at 1%, the second one is waiting for the first to finish. Here the result of the command you gave me: "Smart Array P410 in Slot 1 array A...
View ArticleRe: HP iLo on ML 350 G8 server
The advanced license is worth it, in my opinion. It's a one-time cost, not some annual subscription or anything... definitely not "thousands every year" if that helps.Especially for small businesses...
View ArticleRe: HP ProLiant DL 180 G6 P410 RAID recovering stuck at 1%
Hey, too bad. So looks like there might be something off with the cache then. There are some "hard read errors" on 2I:1:5 but not since reset so might be fine.I guess it's this that's causing some...
View ArticleHP server firmware upgrade failed?
Hello,I'm trying to update an HP ML350 G5 with the HP Service Pack Prliant DVD.I've booted the DVD and I've choosen interactive mode but after two hours I'm blocked at the screen with the HP logo (the...
View ArticleRe: DL380 G8 - 2 hard drive cages with RAID 10 ?
Hi I have been researching this query. Unfortunately, I was unable to locate information to answer your question. I would like to connect you with one of our Solutions Architects, as they have more...
View ArticleRe: hp proliant dl165 g6 restarts itself
OS is Windows 2008 Standard. No addtional hardware. The tape drive has been detached. This morning, I tried to reseat the memories. It powered on but it didn't continue to bbot in windows. Then it...
View ArticleRe: running SPP on linux
But when the engine has shut down, I'm unable to work with the gui. The process just stops working while I am still using it.
View ArticleRe: HP 360 G8 iLo 4and alertmail
Make sure you have entered an Domain Name under Network -> iLO Dedicated Network Port -> General Otherwhise your <Mail From> - Adress for AlertMail will look like...
View ArticleRe: HP ProLiant DL 180 G6 P410 RAID recovering stuck at 1%
I have update the firmware to the 6.40 version.Now the RAID is in state "Interim recovery mode" and doesn't want to recover....I suspect the new hard drive to be faulty.I will try to force a new...
View ArticleRe: iLo4 and 'alertmail'
Make sure you have entered an Domain Name under Network -> iLO Dedicated Network Port -> General Otherwhise your <Mail From> - Adress for AlertMail will look like...
View ArticleRe: HP SPP 2/14 Hanging while loading
Having the same issue. DL380G5 with SPP 2014_02_0B.iso. Tried booting from virtual media and local cd drive. HP is 100% loaded, but its always loading sind 3h. Tried this on two DL380 G5, so it is...
View ArticleHow to roaming the SSD in ProLiant Geni
I have a DL380p Gen8 with two SSD and been make a RAID 1,I turn off the DL380p Gen8,and move this two SSD to another DL380p Gen8,and then power on the second DL380p Gen8,but the two SSD can not been...
View ArticleCan I add a single drive to a Smart Array B110i SATA RAID Controller
I have a HP Proliant ML110 G6 with a Smart Array B110i SATA RAID Controller on the motherboard, with a raided C: drive which is running out of space. I want to install a single drive to which I can...
View ArticleRe: running SPP on linux
Hello,here are some tips. first: reboot or kill the running hpsum processes. delete /tmp/localhpsum.-run hpsum as su-be sure to assign an ip to your network cards or hpsum won't work-temp disable...
View ArticleRe: USB 3.0 ports for HP DL380p G8
Sorry to revive an old thread; Andy did you have success with the QT587AA in the DL380p?I've added a Startech card but it causes fans 4, 5 & 6 to ramp up to almost 50% continuously, which is too...
View ArticleRe: VM ESXI ON HP DL120 G7
ESXi does not support raid-mode of the B110 smart array! It will see the raw volumes only as it is soft-raid.
View ArticleRe: running SPP on linux
These tips didn't help but I was able to pinpoint the problem a bit more precise. When I start the application, the browser opens. When I don't click the 'baseline library' the process keeps running....
View ArticleRe: Issue with installing HP Insight Manager WBEM Providers on DL160se G^
This worked for me too. Thanks!
View Article