Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Browsing all 30225 articles
Browse latest View live

Re: DL585 G2, Smart Array 642 , Windows 2012

Thanks this worked for me as well ;-] DL580 G5, Smart Array 642 , Windows 2012 R2

View Article


Re: Processor upgrade and ESXi question

Hi  Unfortunately, upgrading your processor won't help you run ESXi 5.x on your DL580 G3 - this machine will only run up to 3.5.  The below link are downloads compatible with your HP Proliant DL580 G3...

View Article


HP iLo on ML 350 G8 server

Hi thereI have a few questions on iLo if anybody could help me. 1. Is there any of the iLo functionality that I can avail of for free or is the iLo port completely useless to me without buying some...

View Article

Re: Proliant ML350p Gen 8 drive cage

Hi  I agree with mcfly5, I have checked the Quick Specs for your ML350p  server and confirmed that this HP 5U 6 Large Form Factor (LFF) Hot Plug Drive Cage Kit is compatible.   If you have additional...

View Article

Re: HP iLo on ML 350 G8 server

There are many iLO features that are free.  You can view this data sheet to see a comparison of the features of the various license types and iLO standard...

View Article


Re: Workaround

This works perfectly for me. Thank you so much! Peter

View Article

Server dose not boot from Hard disk

HelloI have Hp dl380 G5.I try to install win server 2003 or 2008 by using hp smart start cd and without it. but I got the same result. this error "Windows cannot be installed on this disk. This...

View Article

Re: Problem with available RAM (ProLiant ML110 G7)

Wanted to upgrade memory on my Proliant ML110 G6 server, and read your post, which mentions that the max RAM allowed is 16GB. Is this true? Can I not install additional RAM to increase the total...

View Article


Re: Server dose not boot from Hard disk

Windows 2008 will install onto a DL380 G5, no problem, even without the SmartStart CD (booting directly from the Windows DVD). That's actually how I prefer to do it and then install the HP tools later...

View Article


hp proliant dl165 g6 restarts itself

Our server hp proliant dl165 G6 restarts itself.. then many days or a week after, it doen't power on anymore. No issue with power supply since we interchange the powetr supplies of two server (we have...

View Article

Re: ML150 G6 hardware waring light flashing and beep code so will not boot ESXi

Temp sensor cable swap with known working resulted in no change. MB still does not either see FAN3 or the sensor. Will see what else I can find out next week.

View Article

Re: Server dose not boot from Hard disk

hi, Please try to create an offline acu report and attach it here. You can do that with the smart start cd. Thanks regards,

View Article

Re: hp proliant dl165 g6 restarts itself

hi, Do you have some add. hw in or attached to the server. What's the OS? Thanks regards,  

View Article


Re: ILO 2 Interface not responding

Hello, Had the same problem on my ML350 G6 server, iLO 1.81, the iLO connection was fine, but still had this alert in SMH.Didn't work reseting iLO, but did work by restarting the HP SMH and the HP...

View Article

Re: Server dose not boot from Hard disk

Hi,  Clearing NVRAM slove the issue.  Thanks, Mohammed

View Article


HP ProLiant DL 180 G6 P410 RAID recovering stuck at 1%

Hi,We just have change an hard drive on a HP ProLiant DL 180 G6 with RAID controller P410 on RAID5 with 5 drive.The the first logical drive start recovering, and since yesterday it is stuck at 1%.I try...

View Article

Re: USB 3.0 on ML350p Gen8

Sorry to revive an old thread...I wanted to ask Senator if the fan speed increased in the 350p Gen 8 server after QT587AA was installed?We had a Startech USB 3.0 card, it uses the same TI 7340 chipset...

View Article


Re: ILO 2 Interface not responding

Better use the latest ILO 2 version 2.25 firmware!

View Article

iLO Help

Hi All, I inherited global severs when my predecessor walk out. Im going thru all the servers and found a number of them do not have the iLO either configured, firmware insatlled or perhaps the just...

View Article

Re: iLO Help

Almost all more or less current Proliant servers have an ILO, unless it is an old series 100 model, they have usually something similar, the Lo100 interface, but this was sometimes optional.What models...

View Article
Browsing all 30225 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>