Re: HP iLo on ML 350 G8 server
Thanks Jimmy, I've just mailed our software supplier this morning and I await her response. I think I originally read the "3 Year" part as being a license for three years, but I understand now that...
View ArticleSMH NIC box
Hi All I've installed SPP(2013/07) I have a problem that SMH(System Management Homepage) doesn't appear NIC box in the system status box Another system status box is appeared OK. I don't know why it...
View ArticleRe: Replace the Hot Spare that Shared between Raid 1 and raid 5
dearI doubt in bay 3 that hold the Harddisk .... mybe the bay 3 that hold the shared sapare hardidsk has problem ...Can i channge the bay3 without loss the data ... i still have free bay in server...
View ArticleRe: Replace the Hot Spare that Shared between Raid 1 and raid 5
Hi, could be!As bay3 is not in use in an array you can just take it out and put it in another bay.
View ArticleRe: Convert RAID 1 to RAID 5
I have not seen any HP RAID controller that supports that kind of conversion. Splitting RAID1 to RAID0 is possible and also to expand an existing RAID with some more drives...But a conversion from 1 to...
View Article4 Proliant DL380 G6s in Cluster for vCenter, Can I install graphics card in one?
Like the title says I have 4 DL380s in a cluster running VmWare. I want to install a decent graphics card for a virtual CAD workstation that will be accessed by only one user at a time.Can I get a...
View ArticleRe: Issue with installing HP Insight Manager WBEM Providers on DL160se G^
finally a solution that worked! I was very annoyed by the fact that I lost WBEM during upgrade of Proliant ML350 G6 from 2008R2 to 2012R2 and started thinking something got seriously broken during...
View ArticleMonitoring DL580 G5 using PRTG
Hello everybody, i am trying to monitor a DL580 G5 using PRTG Network Monitor. So far everything is fine. I can monitor the server using SNMP Sensor "HP Proliant System State" and getting status of...
View ArticleRe: Convert RAID 1 to RAID 5
According to the P400i QuickSpecs page, this controller does support Online RAID Level Migration:http://h18000.www1.hp.com/products/quickspecs/archives_division/12400_div_v3/12400_div.html Assuming...
View ArticleRe: Convert RAID 1 to RAID 5
I have done this exact thing on a DL360 G5 and it works fine. As other replies noted, you have to make sure your array controller cache has a good battery.If the battery says it's bad (and that happens...
View ArticleImplementing HP P200 G3 SAS MSA with 2nos HP DL380p Gen 8 servers
Hi all,Can any one guide me to implent HP P2000 G3 SAS MSA with 2nos HP DL380p G8 servers with mutipath support. In a step by step manner. Both servers should share the common data on the storage. If...
View ArticleRe: Replace the Hot Spare that Shared between Raid 1 and raid 5
dear you know that currently bay 3 is confgured as hotsapre for raid 1 and raid 5 .... does if i change the hardisk bay form 3 to 7 as example the server will sense this modifacation automatically as...
View ArticleRe: Replace the Hot Spare that Shared between Raid 1 and raid 5
Dear, because the spare disk is currently not in use, there is no risk of losing data by taking it out. Don't know if you'll need to do any reconfiguration aftwards, but probably not because the disk...
View ArticleRe: Convert RAID 1 to RAID 5
Thank you so much guys for the quick responses. I have tried it and it worked perfectly. Thank you all
View ArticleRaid and other hard drives not in Raid (HP E200i Ml350 G5)
Hi we have a Raid 5 (HP E200i) in our ML350 G5 Server (4x146GB) logigal drive C: is about 440.3 GBThe free space on the disk is getting low.So is it possible to add a new drive not in the raid, only 1...
View ArticleRe: HP ProLiant DL 180 G6 P410 RAID recovering stuck at 1%
Hi, After changing the faulty hard drive the RAID recover was succesful ! Thanks to all of you for your help ! Have a nice day. See ya :-)
View ArticleRe: VM ESXI ON HP DL120 G7
Sbrown, thank you for your answer!So, i have to disable the Raid controller? And enable Sata Legacy (or AHCI) support? Thank to all
View ArticleRe: HP ProLiant DL 180 G6 P410 RAID recovering stuck at 1%
Great! Thanks for reporting back how it went :)
View ArticleRe: Raid and other hard drives not in Raid (HP E200i Ml350 G5)
Hi,no you can have multiple RAID arrays. The disks are locked to each array. In each array you can create several logical disks. These logical disks are what the OS sees as disks.The E200i can do RAID0...
View ArticleRe: Raid and other hard drives not in Raid (HP E200i Ml350 G5)
You can extend the existing RAID (maybe the better option) or create a RAID0 on a single drive.
View Article