Re: HP SPP 2/14 Hanging while loading
Thanks, I had the same issue, had to update from 10.10 then was able to apply the Service Pack for Proliant SPP. Here is the link in case anyone is looking for the Smart Update Firmware DVD Proliant...
View Articleserver wants to boot from usb drive
hi i have an HP ProLiant ML310e Gen8 Server that tries to boot from an attached USB backup drive instead of it's local hard drive. the usb drive does not show up in the BIOS boot order options so i...
View ArticleRe: SAS 2.5 to SATA
Hi, This part is used in HP Desktop systems and not in servers according to PartSurfer.Spart Part number for DG146BB976 is 418399-001 and its compatible with G6 and G7 servers but not in Gen8.Gen8 uses...
View ArticleRe: SMH NIC box
Hi, What is the server model, OS, NIC adapter?Make sure Insight Management Agents is installed and is running. Thank You!I am a HP employee.
View ArticleNC364T quad port nic drivers for Windows 2012 R2
Hi there Are there Windows 2012 R2 drivers for the NC364T quad gig nic?i can only find Windows 2008 R2 drivers I have tried two different nc364T nics with the Windows 2008 R2 drivers installed on...
View ArticleRe: Monitoring DL580 G5 using PRTG
Hi, First question, can PRTG Network Monitor show RAID controller information? Make sure Raid drivers/firmware and Insight Management Agents are up dated. Use only SNMP and check the status. If that...
View ArticleRe: Implementing HP P200 G3 SAS MSA with 2nos HP DL380p Gen 8 servers
Hi, Read the User Manuals.HP P2000 G3 MSA Array Systems Manuals.HP P2000 G3 Modular Smart Array Systems Data Sheet.HP P2000 G3 Modular Smart Array Systems QuickSpecs.HP P2000 G3 MSA Array Systems -...
View ArticleRe: Integrated Lights Out 2 (ILO2) Drivers on a W2k8 x64 Server
Hi, PCI Vendor 0x103c, Device 0x3302 is usually with IPMI device. These drivers for iLO should fix the Unknown Device. HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server...
View ArticleRe: server wants to boot from usb drive
Hi, Make sure the SmartArray controller and hard drive C: is in the first boot order.Try connecting the USB device to a different USB port and see if that changes the booting order.Update the server...
View ArticleRe: SAS 2.5 to SATA
The embedded disk controller in that unit only supports SATA drives
View ArticleRe: server wants to boot from usb drive
yes i have tried different USB ports and yes the Smart array controller and hard drive C: is in the first boot order, the usb is not even showing as an option. As this is our only server i'm reluctant...
View ArticleClik here to view.
Re: server wants to boot from usb drive
You should find an entry "usb keydrive" in BIOS boot order. But you can also try to disable USB boot in BIOS.Consider to keep the BIOS current! Images are taken from HP website. Boot order (item5):...
View ArticleRe: Proliant ML350 G5 SBS 2003 Reboots unexpectedly
Hi i am experiencing same problem. I have newly joined in here but since yesterday computer is getting rebooting. We have connected through KVM Switch. so whenever we keep idle the server & try to...
View ArticleRe: Please issue a DL320e Gen8 V2 firmware update for new CPU support
May the update scheduled already?
View ArticleNeed help installing additional Raid Controller on ML350 G5
I have the motherboard bundled E200 controller connected now and are thinking about extending the server with more drives via a P400 controller that i also have in my posession. I also need an...
View ArticleRe: Monitoring DL580 G5 using PRTG
Hi Suman, yes the sensor shows the disk controller and status "ok". Firmware is up to date.
View ArticleFlashing Amber/Green
Dear All, Drive Status on my HP Proliant Server is flashing Amber Green. When i read the Error Description it says " The Drive is a Member of one or more logical Drives and predicts the Drive will...
View ArticleInstallation Server 2012R2 failed on Proliant DL360 G7
Hi all, I try to install Server 2012 R2 on a DL360G7... It is running smoothly until Installing Updates and Finalizing the install...At that point, the installation is exited with the error...
View ArticleML350G4p w/Smart Array 641 install W2008x64 R2 fails at load drivers for mass...
I have downloaded every piece of software I could find for this controller but none will install, even when detected as "works with this computer". Will server 2008 r2 run on this box or should I...
View Article