Re: ML150 G6 - Memory Madness
Possibly you could contact HP support for help but I'm guessing you arent doing this as you havent taken out a support contract on the server or have allowed it to lapse and now expect unending free...
View ArticleRe: DL380e G8 PXE setup
Hi Suman_AN,Thanks for replay.We was try to use:Spares: 586444-001581199-001NC550SFP Dual portBut we was don't have time to trying boot from that device and we decide to buy a normal RJ47 pca alom...
View ArticleRe: 600GB SFF disks not recognized at P410i - Firmware Bug?
As stated in the last post our HP partner exchanged the remaining three EG0600FBDBU drives and got EG0600FBVFP as replacments. An hour ago, all four EG0600FBVFP drives were inserted into our production...
View ArticleRe: VERY slow network after many HW updates on DL370 G6
4 months after this driver appeared on their FTP site it is still not listed on any Proliant G7 driver page. This driver fixed a ajor issue I had and instead of 4mb/s I now get 400mb/s throughput. Why...
View ArticleRe: Problem with DL320 G6
Hi, This could be either firmware or hardware. First things first, update the bios and the controller firmware.If that does not work, update the HDD firmware. If this does not solve your problem, this...
View ArticleHow to convert ML350 GEN8 rack to tower?
Hello, here came the question up, if it is possible to convert a ML350 GEN8 Rack into a Tower. I know, it is officially just possible vice versa, but I do hope, that someone can post an idea. Thanks in...
View ArticleRe: ProLiant Support Pack on Red Hat Linux 64
Problem solved ,I had not installed all i386 packages as require by installation instructions. Bye,Maurizio
View ArticleRe: VERY slow network after many HW updates on DL370 G6
Hi, we have very many G6 machines with Qlogic based NIC. The problem just occurs, if the backbone is set to 100 Mbit/s. 1 Gbit/s solves all your problems. Alternatively we added on Intel based NIC,...
View ArticleRe: How to convert ML350 GEN8 rack to tower?
The Tower-to-Rack conversion kit is just a rackmount tray to put the server in the rack on its side. Without spending too much time searching for official guidance from HP, I'd assume that the reverse...
View ArticleRe: How to convert ML350 GEN8 rack to tower?
Hello, well, the machine is quite thin and I worry that it just falls over. Any suggestions how to stabilize the server a bit? Thanks, BASF_FMA
View ArticleRe: HP ML350e Gen8 Fan Noise
I install servers for a certified HP Business partner / reseller. I've installed multiple ML350 G8 servers for customers with this very problem. Please pass along this fix ASAP. Thank you. The up...
View ArticleRe: DL580 G3 illegal opcode
hi, I having also an illegal opcode error. I have an HP DL 580 G5 server running windows server 2008 std. There was a power outage and the server was powered off. Since that i'm getting that op code...
View ArticleNIC Teaming
So I have an older DL360 that we need to retire and are moving it to a new server. The new server has 4 nics that we will team together and the old server has two. we have about 1.8TB to move between...
View ArticleRe: DL580 G3 illegal opcode
Yes, you can get the Red illegal opcode screen when the MBR is corrupted.
View ArticleRe: HP DL160 G5, iLO Password Reset
To reset the user name (for slot 3, as above): ipmitool.exe 20 18 45 03 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
View Article3TB RAID 1 on Proliant ML110 G7 using Smart Array B110i SATA RAID Controller?
Did any one successfully configured 2 x Western Digital WD Red WD30EFRX 3.5" 3TB Hard Drive using RAID 1 on ML110 G7 server?
View ArticleRe: HP ML350e Gen8 Fan Noise
I had the same Problem with ML350 gen 8In the ROM-Based Setup Utility I changedAdvanced Options / Thermal Configuration from Increased to Optimal Cooling. That was the only way to silent the servers
View ArticleRe: DL320 G6 and VT-d - does anybody have this working?
Hi, What is the linux flavor you are trying and what is the bios version on the server? Some tips:Have you tried installing Windows OS with VT-d enabled on this server?Can you try updating the BIOS on...
View ArticleRe: HP ML350e Gen8 Fan Noise
Any further info about the fix? I came across this problem yesterday at a customer with a ML350p Gen8, which I added a redundant fan but either with or without it I get a loud noise. If I get my hand...
View ArticleRe: How to clear NVRAM on HP ML110 G4?
Hi, CR7 indicates a system error. Clearing NVRAM may help.Attached is a pic of system board with switch location. Thank You!I am a HP employee.
View Article