Re: HPSUM fails download on cp018187.exe
That did the trick! Thanks for the easy fix.Joe
View ArticleRe: High CPU Temp on Proliant G7 Servers
On the server with 1.28 there is no log entry concerning overheating. So it looks like this helped. But it's not the solution after all ;). Maybe the second level comes around with a new version.
View ArticleRe: HP DL 380 G4 shut down after power blackout but don't restart
Hi Nicola, sorry for the very very late response.Did you have done a minimal config with one cpu and 2 dimm´s in a pair ?Also did you checked the IML log in ILO ? GreetingsMarcus
View ArticleRe: Installing Windows Server 2012 /Hyper V 2012 on ML350G6
Late to the party but wanted to confirm also that with the newest SSP you can install Server 2012. John Joyner gives a simple break down for anyone still needing help:...
View ArticleWIN 2008 R2 Install on a ML350p G8 Fails
Installing WIN 2008 R2 on my ML350p Gen8 fails using either an interactive load(WIM.xml) or Itelligent Provisioning(Install.wim)
View ArticleRe: DL320 G6 and VT-d - does anybody have this working?
Sorry, I should have mentioned that the BIOS and firmware are all updated to the latest available. The BIOS is 2012.12.02. The three Linux flavors I tried were Proxmox (debian-based), Ubuntu 12.04,...
View ArticleRe: Creating an Intelligent Provisioning update mirror.
Intelligent Provisioning versions prior to version 1.40 do not work with IIS when using HTTP protocol, you must use FTP or another webserver ( apache/nginx ). The hp-ipcli command is available via the...
View ArticleRe: WIN 2008 R2 Install on a ML350p G8 Fails
Please, see the Intelligent Provisioning Version, if it out of date, update the Intelligent Provisioning Image and try again install the Windows Server. Below link....
View ArticleRe: DL385 G2 Diagnostic LED's
The DL385 G2 Maintenance and Service Guide is not very clear. The "Diagnostic LEDs" are iLO's diagnostic LEDs. See page 182...
View ArticleChange Secondary DNS IP Address through SSH ? (ILO 3 and ILO 4)
Is there a way to update the Secondary DNS IP Address through SSH on an ILO 3 and ILO 4 ? Thanks in advance for the help Rob
View ArticleRe: iLo4 and 'alertmail'
What little bit I've played with this feature, depending on your SMTP server you may need to put in a valid domain for the "Sender Domain"
View ArticleRe: CDROM problem on a DL360 G1
your hardware are all ok. One thing you have not thought of doing. - burning disk image at 24X speed. That should solve the booting problem with DL360 -ferdienandp/
View ArticleRe: USB 3.0 on ML350p Gen8
Hi, we have tested HP QT587AA on ML350G6 with SBS2008, using TI-Driver 1.12.24.0ML380p G8 with Server 2012, but don´t remember the driver version (think it was the os build in driver) works quite...
View ArticleRe: Change Secondary DNS IP Address through SSH ? (ILO 3 and ILO 4)
I should have also noted I can get this to work with the PRIMARY DNS IP WORKS> set /map1/settings1/dnssettings1 DNSServerAddress=10.100.17.11 DOES NOT WORK> set /map1/settings1/dnssettings2...
View ArticleHP Proliant ML350 G5 SAS Hard disk Problem
Hi, I am getting problem in HP Proliant ML350 G5. Some few days back one of the SAS HDD failed. It was 146GB SAS 15krpm HDD. We got new one which is 146GB SAS 10k rpm HDD. Its on RAID 1(1+0)...
View ArticleRe: DL180 G5 Server boot problems
were you ever able to get any insights into what's going on with the system? I just added one of these to my network today and it booted fine the first couple times while installing the OS, but now it...
View ArticleRe: ProLiant DL360 won't boot to CD
During the boot process, look for Press F10 for system utilities. This should point you to the BIOS. Regarding the boot to CD. Burn the iso images in "24X Speed" only. Not lower and not higher.it must...
View ArticleRe: Proliant DL 380 will not power on
Hi, Not sure which generation of DL380 you are talking about.But if power supplies led is off, it means that power supplies are bad or if the server has a power supply backplane then its bad or there...
View Article