Re: ML310G8 (470065-772) Windows Foundation 2012
Hi, Not quiet sure what you meant by 'last series' and 'previously series'.Let us know what exactly you are looking for. Thank You!I am a HP employee.
View ArticleFull Slot RAM
Hi,Please let me know if I want to use 24 slots of RAM in DL380 G8 while i have 2 processor, does it matter if i use single rank or dual rank modules?
View ArticleRe: ML310G8 (470065-772) Windows Foundation 2012
Servers bought before 1.7. are ok. Server bought after 4.7.2013HP ML310eG8 E3-1220v2PN: 470065-772SN: CZ1322017Nis not OK.
View ArticleRe: ML310G8 (470065-772) Windows Foundation 2012
>Server bought after 4.7.2013 I assume you mean ISO 8601 date 2013-07-04?
View ArticleRe: HP Proliant ML 350 g5 with Win 2008 does not manage to reboot
I add some info to the latter: I noticed the 3,6 Ni Mh battery pack on the 128 M card (see picture) had a green light which turned yellow; now after unmounting and remounting the battery the light is...
View ArticleRe: HP Proliant ML350 G5 SAS Hard disk Problem
Hi, What the controller model ?Smart Array e200i? and your system operation is windows server ?
View ArticleRe: Full Slot RAM
Please check the link below: http://h18000.www1.hp.com/products/servers/options/tool/hp_memtool.html http://h18000.www1.hp.com/products/quickspecs/14212_div/14212_div.PDF HP MemoryNOTE:HP memory...
View ArticleSlow Server Boot Time... ProLiant ML350e Gen8
I'm working with this server to write up documentation on setting up Windows, Hyper-V, VDI etc etc... And the reboots are really starting to be a drag... Is there anything that I can do, even...
View ArticleDL360 G5 BIOS corrupt. Need help
Hi BIOSwas damagedwhen installingthe Service Pack.The serverwill not boot, black screen,the keyboarddoes not respond,the lights aregreen, thefans are working.Cleaning CMOSthroughSw1(S6= On)did not...
View ArticleACU install issues
I was sure if this should go under storage or not. I am trying to get HP ACU installed on an inherited server at my workplace and everytime I try to install it I get failed install message that says:...
View ArticleRe: How to populate dimm slots on DL160G5?
Hi, Stefano You must follow the guidelines when adding or replacing memory modules:• For 2P system, both physical processors must be of the same type and speed.• Use 667 DDR2/4.0 GHz FBD (Fully...
View ArticleRe: HP Proliant ML 350 g5 with Win 2008 crazy behavior
No reply ... no solution, situation is more and more desperate. Just one las question: is it worth to make a last trial and buy a new 128M cache battery (not too expensive)? Or is it better to send the...
View ArticleDL380p Gen8 - Requires Additional Controller for optional +8 SFF Cage?
Per the quick specs for HP Proliant DL380p Gen8 "NOTE: The optional +8SFF drive bay requires an additional internal storage controller be selected. HP recommends the HP Smart Array P420/1GB FBWC 6Gb...
View ArticleRe: ask - Recommended Configuration for Domain Controll and SQL Server
hi,thanks for advice. it's pretty high budget. for storage, maybe I will use alternative way. But I need for sure, specification that users will not experience slow in connection/access to database. if...
View ArticleClik here to view.
DL380e Gen8 (PN: 668665-xx1) - HyperThreading Support
Hi, Our client wants to purchase this server model [DL380e Gen8 (PN: 668665-xx1)] and his question is 'does this server supports hyperthreading?'. Upon checking on HP Product Bulletin it has HT on the...
View ArticleRe: DL360 G5 BIOS corrupt. Need help
Hi, Some work arounds:Remove any Add-On cards if installed.Remove additional RAM.Test the server for POST, if problem still there.Remove the Coin Battery for few min then try to POST. If none of the...
View ArticleRe: ML 350 G5: server does not switch off but reboots after "shutdown -hf now"
Hi, Have you tried the followig commands: shutdown -hhalt -p Thank You!I am a HP employee.
View ArticleRe: DL360 G5 BIOS corrupt. Need help
Hi, Suman_AN order:---Remove any Add-On cards if installed. did - not help Remove additional RAM. did - not help Remove the Coin Battery for few min then try to POST. did (~30 min) - not...
View Article