Re: Problems with Proliant DL560 Gen 8
Hi,similar error here, although on a DL380 Gen8. I wonder how you solved this issue.Best regardsThomas
View ArticleCan I install Server 2012 on my DL385 G2/G5
Hello I've tried to install Server 2012 on a DL385 G5 but after the install it fails to boot giving a blue screen stating that it failed to start and reboots a bit too quick to read the error properly....
View ArticleDoes support SATA HDD , HP Proliant DL380 G7
Hi,I am having Hp Proliant DL 380 G7 server with 146 GB SAS HDD. I am just planning to upgrade the storage. Please let me know, does it support SATA Type HDD ? Thanks
View ArticleRe: ML 350 G5: server does not switch off but reboots after "shutdown -hf now"
Hi, i will try it and keep you informed. Also i will try a Linux booted from a live CD (e.g. Knoppix). Bernd
View ArticleCustom Operating System Deployment using Intelligent Provisioning
Hi,we are evaluating the option to remotely deploy a custom Windows 2008R2 installation using Intelligent Provisioning. Basically we are starting a WinPE to run an Off-line SCCM Installation of the...
View ArticleClik here to view.
roblem With Setup HP RAMS 9.20 on ProLiant DL380p Gen8
hi guys i have buy a ProLiant DL380p Gen8 with 2 Processors and 4x600GB disk Drive. i had configurated my Hard Disk as Raid1+0 and Update all of firmware from A to Z. when i Put HP RAMS 9.20 Appliance...
View ArticleRe: roblem With Setup HP RAMS 9.20 on ProLiant DL380p Gen8
>> HP RAMS 9.20 Appliance CDWhat is it? If this is the smartstart firmware DVD version 9.20 from 2010, this is much too old.For firmware updates you should use the current SPP...
View ArticleFeet for the ML 350p Gen.8 Rackserver
Hello, i have a problem.i have order an ML 350p Gen.8 Server in ht Rack Version, but i wisch to use the Server as an Tower.Is there any way to get the feet from the Towermodell for the Rack Server ?
View ArticleRe: DL380e Gen8 (PN: 668665-xx1) - HyperThreading Support
I believe that's an error. The E5-2407 processor does not support HyperThreading per Intel's ARK knowledgebase.See here:http://ark.intel.com/products/64614/
View ArticleRe: DL360 G5 BIOS corrupt. Need help
Activate the redundant ROM and check if the server is able to complete POST and attempts to boot. To do so, the following steps may be performed: i. Power down the server and remove the...
View ArticleRe: DL360 G5 BIOS corrupt. Need help
Hi Locate individual switch S1, S5 and S6, and set it from the default position of ‘Off’ to ‘On’ - I have donethesestepsyesterday, did not helpConnect a bootable USB key containing the latest...
View ArticleRe: HP ML350e Gen8 Fan Noise
I've had an open case with HP Support about this issue since April. I'm running Ubuntu Server 12.04, and my fans never go below ~48%. In my case, the server must be located in a setting where it would...
View Articleupgrade 2nd processor
I need to purchasethe 2ndprocessor forDL380G5server, type ofprocessor: IntelXeon4CE5335@2Ghz8MbL2.
View ArticleRe: ML 350 G5: server does not switch off but reboots after "shutdown -hf now"
Hi, i tried:- shutdown -h- poweroff- init 0- halt -pAlways the same. No shutdown, but reboot. I tried knoppix with ambiguous result:First shutdown: cd tray opened, knoppix says "press return to switch...
View ArticleRe: ProLiant ML110 G7 not possible to install Windows 2003 x64?
Yup, I tried (what I thought was) everything, but enabling legacy SATA worked for me too. Thanks. I never would have found this on my own. KP
View ArticleRe: upgrade 2nd processor
You need part # 437941-B21. This is the kit for the DL380 G5 which will include all necessary components to ensure proper installation and cooling.It looks like this kit is still available at various...
View ArticleDL 180 Transfer Rate
I have a DL 180 G6 server with the P410 controller with 512 Cache. I know the transfer rate is support to be 3 GBs with SATA drives. I'm only getting Transfer rate of 20-30Mb The drives I'm using are...
View ArticleNo Boot on 2nd processor upgrade
I have a Proliant ML350 G5, currently single CPU and want to upgrade to dual CPU. I have purchased and installed the components listed below, but the server will not boot (bring up BIOS).- Matched pair...
View Article