Re: HP DL160 G5, iLO Password Reset
Hi Just found another solution for the password reset of the admin account: - Download IPMIutil here: http://ipmiutil.sourceforge.net/FILES/ipmiutil-2.9.1.msi - instal on your windows plateform - CMD...
View ArticleRe: DL380e Gen8 (PN: 668665-xx1) - HyperThreading Support
Thanks for your reply.I saw that this processor doesn't support HT. They should ammend the mistakes in the Product Bulletin.
View ArticleFitting 8 drives into an ML310E
I'm looking at buying an HP ProLiant ML310E server. On paper, it is perfect in pretty much every way, except for one: it says that it only supports 4 hard drives - I need it to have room for at least...
View ArticleRe: roblem With Setup HP RAMS 9.20 on ProLiant DL380p Gen8
my purpose of typing HP RAMS 9.20 Was : HP Route Analytics Management Software 9.2x here is a little description :http://www8.hp.com/uk/en/software-solutions/software.html?compURI=1172914
View ArticleRe: roblem With Setup HP RAMS 9.20 on ProLiant DL380p Gen8
When a product name includes the word "appliance" and the installer displays an error message saying "cannot recognize the hardware platform", I think the product may work on a very limited choice of...
View ArticleRe: DL 180 Transfer Rate
3 GBs is the transfer rate of the SATA interface only. As far as I know, only SSD drives (and probably SSD/HDD hybrid drives) have a chance of consistently using the full capacity of a 3 GB SATA...
View ArticleRe: Internal Storage Controller Overheating ( Temperature Sensor 3 , Location...
Did you ever get a viable solution for this? I have a system that is doing almost the same thing, the only difference is that is shows repaired immediately after the overheating message as...
View ArticleDL320e with P420 Array Controller doesn't showing SAS drives
Hello,In order to use SAS drives, I've just installed a P420 Array Controller in a HP DL320e Gen8 Server (Which came from factory with an onboard B120i controller, which only supports SATA).The server...
View ArticleHP Proliant Server RAID 1 SAS HDD
Can a RAID 1 SAS HDD from a HP Proliant Server be read if I put it on a computer (using either a SAS adapter/enclosure/card)?
View ArticleRe: High CPU Temp on Proliant G7 Servers
Can you log in to iLO3 web UI and take a screenshot of the event log and iml log? I only need the events around the time iLO triggered the server shutdown.
View ArticleRe: DL320e with P420 Array Controller doesn't showing SAS drives
Thanks Murali_V! As you pointed, I turned out to be a wiring problem, Thanks!
View ArticleRe: Smart array P420 temperature is 255
Hi, do you have 2 CPUs installed ?Slot 1-4 are PCI 3.0, but 3+4 only activated with an 2nd CPU.Slot 5+6 PCI 2.0 If no 2nd CPU is installed i would try Slot5-. Inside the QuickSpecs you find detailed...
View ArticleRe: High CPU Temp on Proliant G7 Servers
The Event Log only has two entries from last year complaining about the power supplies not being redundant. The Platform event log is attached.
View ArticleRe: Smart array P420 temperature is 255
Pardon but Slot 5 is PCIe2!And accordnig to quick specs with 1 CPU i can use only slot and slot2, but slot1 is x4 which is not suitable, so slot2 is only slot i can use!
View ArticleRe: DL 180 Transfer Rate
HI, I assume that 20-30MB figure is for sequential I/O as a single mechanical drive cant manage that figure for random I/O. Try checking these settings in the HP ACU. A: Check that you have your array...
View ArticleRe: ML350 G6 Raid 5 Creation
Hi, As mentioned above if your model is a zero mem model then you will have no access to advanced raid modes. To enable these all you have to do is buy a 512mb cache module, this will unlock raid 5...
View ArticleRSTP Flapping when server is rebooted ?
Forgive me but I am not a network adminsitrator however I am reaching out to anyone who can assist. Last week a server we use for backups( bridgehead ) was rebooted as we do on a regualr basis and at...
View ArticleNo bootable filename recieved - Ubuntu Server - ProLiant ml310 G8
Hi, I just "installed" ubuntu-12.04-server-amd64 from a CD-ROM, I didn't use intelligent provisioning and didnt configure or set-up any RAID.I just inserted the CD and follow the steps from the Ubuntu...
View Article