Re: strange behaviour on a HP Proliant DL380p GEN8
> Actually we encounter strange problems on the file system What kind of problems? More details please! -Bob
View ArticleRe: DL360 G6 Hang but not look like hang
Hi Jimmy, I'm seeing this exact same issue on all 7 of our DL380 G6 servers running 2012 data center core with HyperV. I will try changing the BIOS as you mention (fingers crossed). thanks,Ben
View ArticleInstallation of Proliant DL380 Gen 8
Hello.I work as a datacentre technician. I have mounted several servers of many manufacturers and models.Until recently I have praised the mounting solutions for DL380 servers because of the ease of...
View ArticleRe: strange behaviour on a HP Proliant DL380p GEN8
Hi. There are a critical update for the firmware on EG0300FBDBR drives...
View ArticleRe: Problems with Proliant DL560 Gen 8
Hello. I encounetred with same problem like but on DL-360P gen8 server
View ArticleDL360e G8 Processor 2 doesn't power up.
I'm installing a brand new HP ProLiant DL360e Gen8 Base - Xeon E5-2407 2.2 GHz- Server (668814-421) and have added a second Intel Xeon E5-2407 - 2.2 GHz CPU (660664-B21). The server stops i POST with...
View ArticleRe: DL360 G6 Hang but not look like hang
Didn't help in my case. Back to the drawing board.
View ArticleDL320e Gen8 v2 fan noise
I recently purchased a brand new DL320e Gen8 v2 and have installed VMware-ESXi-5.1.0-Update1-1065491-HP-5.50.26 onto the embedded internal microSD slot. There are no internal drives or expansion cards...
View ArticleRe: Rack to tower conversion for DL380p G8
Thank you. I have a dl380pG6 at home that I brought from a private owner and it came with a "stand" (see attached) but I guess this was an anomoly. I see that Rack Solutions has a "universal" rack to...
View ArticleRe: MicroServer Gen8 is noisy
It may depend on which disk controller one is using. http://b3n.org/installed-xeon-e3-1230v2-in-gen8-hp-microserver/ ACHI reported as noisy. I would buy one, but don't want noise.
View ArticleRe: Compaq Proliant ML370 G1, the power button does not function
Checked All cables OK.Pressing F9 nothing happens
View ArticleRe: MicroServer Gen8 is noisy
Yes I had read reports about the fan speed going up with the Smart Array disabled but I have tried enabling and disabling AHCI controller mode to no avail. Let me get back to you with fan speed and...
View ArticleRe: P400 Stuck At Initializing during boot
Yeah I think the card is probably faulty as 3 P400's in the system shouldnt cause any issues. The only other thing i can think of is some HP firmware block is the issue, as going by HP's rules with 2...
View ArticleRe: MicroServer Gen8 is noisy
I'm run them both in RAID mode and AHCI mode with no difference in fan noise level. The link provided is for people putting in faster CPU's, I'd expect the fan to spin up a bit with a faster CPU in the...
View ArticleRe: MicroServer Gen8 is noisy
Actually, I think Stefan did not change his cpu, and was the one that noticed fan speed changed (for him) with different controllers. Maybe HP needs some firmware updates?
View ArticleRe: MicroServer Gen8 is noisy
There is a new firmware dating from August 14th available but the release notes do not contain information about this specific issue. I will be updating over the week-end and report back.
View ArticleRe: iLO3 1.60 availability?
iLO3 v1.61 has been released to the FTP Online ROM Flash Component for Windows x64ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1728391553/v89958 Online ROM Flash Component for Windows...
View ArticleRe: DL380 G6 SAS Backplane Firmware update problem
I know this is an old thread, but for any future internet searchers, it looks like this firmware that was causing issues in 2010 is still causing issues in 2013:...
View ArticleLooking for a small server that can minimize power consumption & heat
Hello, I'm looking for a used ProLiant server for a small office, and important criteria are power management and heat. I understand that ProLiant Power Regulator is compatible with G6 & newer...
View Article