Re: Looking for a small server that can minimize power consumption & heat
Hi Bob, Is this going to be a racked solution if it's only for a small office or just sitting on a desk in an old cupboard? For racked in a very light workload environment like you suggest it is I'd...
View ArticleRe: ML 350p Gen8 P420i Raid controller performance problem with 3 x SSD in Raid5
Thanks for information. I got the same 350p and just wondering about which ssd to buy- 840 pro or s3500.
View ArticleDamage Hard Disk
I have Windows server 2008 installed on DL 320 G6 server contain 4 HDD ( each one 500 GB ) and configured as RAID 5.two days agobecamethecolorof one of the disk red and after thatlostsome data. - How...
View ArticleDL 180 G6 with Server 2012
Hi All, After install server 2012 on DL180 G6, System Management Homepage cannot run normally,"Management Processor" showing "none". Does anyone have a workwround on this? thanks!
View ArticleOnly Random Power-On Delay in RBSU
Hi, I'm currently configuring my Server to recover from clean shutdown by the UPS due to commercial power interruption. The server is a DL 385 gen8 it has a D2700 attached by mini SAS. As far I got...
View ArticleRe: Dl320s issues trying to install Windows 2008 server or WHS 2011
I found my issue. The server was running some really old BIOS/ROM/Firmware on the motherboard and P800.I was able to reload the Recovery DVD get Win2k3 back on it. Once it was all loaded and updated I...
View ArticleRe: Only Random Power-On Delay in RBSU
More random delay options were added to iLO4 v1.30http://h30499.www3.hp.com/t5/ITRC-Remote-Lights-Out-Mgmt-iLO/iLO-4-firmware-version-1-30-released/td-p/6149611
View ArticleRe: Only Random Power-On Delay in RBSU
Hi, Is there any reason why I didn't got this as the latest release version from HP directly? Is it a beta firmware? I ask as somebody was complaining about having trouble now, in the post you sent me....
View ArticleTCP/IPv4/6 can't be installed
Hi, I currently have the problem that my 4x1Gbit network adapter can't get a static Ip as I can't install the TCP/IP protocol when I go into the properties and then check the box of TCP/Ip them press...
View ArticleRe: Only Random Power-On Delay in RBSU
I now installed the Firmware and I got the options as you mentioned in the posted link. Thank you.I just don't get in what situation you want to have a RANDOM delay, don't you always want to know what...
View ArticleRe: TCP/IPv4/6 can't be installed
Actually I just noticed that this is only the case for adapter 1. 2,3 and 4 are working fine it's just the 1.
View ArticleRe: Only Random Power-On Delay in RBSU
During the first couple of seconds after powered On, Servers can draw lots of power. If you have racks full of servers in your datacenter and try to power them on all at once, you could get a power...
View ArticleRe: Only Random Power-On Delay in RBSU
Ok, but as random again could make that by coincidence it culd happen that a lot of servers start in an intersection of that boot delay and so the peak happens again.ORare the servers negotiating the...
View ArticleRe: DL 180 G6 with Server 2012
Hi, ProLiant DL180 G6 does not support Windows Server 2012. Thank You!I am a HP employee
View Articleproblem of including. off ppm2
when the server ph proliant ml350 on the motherboard LED lights ppm2
View ArticleUPS Compatibility DL385p
Hi all, I heard someone have a problem with one of the new gen 8 hp prolianr servers where it was turning off when it was going on ups battery and someone started talking about it needing a pure...
View ArticleMultiple iLo network setting change questions.
Hello Is it possible to change multiple iLo network settings using ribcl ? I need to change +- 2000 ilo's. Please advise on the best way to go about this. Thanks
View ArticleRe: DL180 G6 25SFF backplane, cables to system board and P410
Hi Mike, We are also attempting to convert our DL180 G6s from 12-bay 3.5" drives to 25-bay 2.5" drives. I purchased 2 of the 25-bay cages and I cannot get them to work on our DL180s. The DL180 simply...
View ArticleRe: UPS Compatibility DL385p
Hello, this is a true. APC Back Ups and Smart Ups SC are not recommended for servers with active-pfc. See: http://www.apcmedia.com/salestools/RMUZ-7DTKRC/RMUZ-7DTKRC_R1_EN.pdf
View ArticleRe: Multiple iLo network setting change questions.
There's several ways around this, our PEARL script or our utilities (CPQLOCFG) for windows. You also have the online hponcfg if you can run it on the host. Please advise the type of ilo &...
View Article