Server DL380 G7
I Have dL380 G7 Server. i want to confrigure Raid arrey but i'm unable to confrigure also after arrey confriguration how to install OS windows server 2003 in DL 380 G7 ServerAlso can any body guide me...
View ArticleWhere to download HP Insight Management WBEM Providers and Insight Managment...
Hi,Can someone please link me where I can download HP Insight Management WBEM Providers and Insight Managment Agents 32x for 2008 SBS/Server 2008 32?
View ArticleRe: Server DL380 G7
You can configure the RAID when you press F8 during boot when the smart array message appears.However, use windows 2008 or 2012, 2003 is no longer supported.
View ArticleClik here to view.
Re: Cannot install new SPP 2016.04.0 - Bios Error
This was one of the screen I got, but as said, it was a bad usb stick.
View ArticleRe: DL 380G4 no vga output
The monintor and connection are ok.It will sound a long beep if i take the mem away.
View ArticleRe: DL 380G4 no vga output
If you are using the embeeded video card or another video card, try a different pce-i x16 video card. Install it into a vacant slot in the PCI-Express expansion cage --assuming your server comes with a...
View ArticleRe: DL380 G7 - Can I install a x16 video card to the x8 slot on the riser card?
>>I did manage to install a x16 card (ATI FireGL V3300)No luck with my HP ATi HD3650 PCIe X16 512MB Video Card>>as the result the FANs run in higher speed and make extra noiseDid you...
View ArticleRe: Set up RAID ( 1+0 ) on DL380 G8 using two HDDs
>>Then I added secondary HDD and tried to setup RAID 1+0 so that secondary HDD can be used as a backup of primary...(This is based on my experience with the G5). Please always backup your data...
View Articlecannt install windows server 2008 r2
i am trying a few days to install the new server witout succes. if i install the windows 2008 r2 i cannt select a disk to install. the only drive what i see at the BIOS is dynamic smart array RAID...
View ArticleRe: HPRest.exe Administrative permissions / Powershell BIOS Cmdlets based on...
mhaeusler wrote:Hello,is there any particular reason why hprest.exe needs to be "Run as Administrator" on Windows? Communication with remote systems via HTTP/HTTPS should normaly not require...
View ArticleRe: cannt install windows server 2008 r2 ML10 V2
You need to run the HPSSA utility to configure the drives attached the the Dynamic Smart Array, or go into RBSU and change the controller mode from RAID to plain SATA AHCI mode. I don't have acces to...
View ArticleRe: cannt install windows server 2008 r2 ML10 V2
This server has no intelligent provisioning, so better see this advisoryhttp://h20564.www2.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0128448or this...
View ArticleRe: cannt install windows server 2008 r2 ML10 V2
Thanks Torsten, I thought I had posted previously on this server
View ArticleDoes Proliant DL380 G9 support Tesla k40m (passive) GPU?
Hi!The quickSpecs for Proliant DL380 mentions the Tesla K40C (active, with fan) and i wonder if it also supports the Tesla K40M (passive, without fan). If it does support it, what is needed to isntall...
View ArticleRe: cannt install windows server 2008 r2 ML10 V2
Thank you for your support.i have made some Pictures.i have made a logical drive see picture but how to install the driver for hp dynamic smart array b120i sata raid controller. if i start the windows...
View ArticleRe: cannt install windows server 2008 r2 ML10 V2
thanks again! we have solved the problem.i had to unpack the control driver instead off install. after that i was able to install the driver thanks a lot
View Article