Re: BIOS HAS CORRUPT [hw] PMU RESOURCES....
Wonder why the radeon video driver is loading, the embeded video should be using the mga driver. Have you added a video card?
View ArticleRe: BSOD Blue Screen HP Proliant ML110 Windows server 2003
I still stuck on my issue.I just want to repair my system.Thanks
View ArticleML10 Gen 9 Video problems.
Hi.I had bough and HP ProLiant ML10 G9 with a Xeon CPU and 2x1TB for file sharing.I can't get image. I don't have a DisplayPort Monitor and i suppose that my adpater is not 1.2 active.I read the manual...
View ArticleRe: BSOD Blue Screen HP Proliant ML110 Windows server 2003
The only solution may be to install the OS from scratch and restore your data. Sounds like when you lost power the disk got corrupted.
View ArticleProliant DL160 G6 front panel pinout
Does anyone know what the pinout of the front panel connector on the dl160 g6 is? I need to know, as I am transplanting the internals to a different case with more drive slots. Any help would be...
View ArticleRAID array definition lost
I have a dl380 g6 server with a Smart Array 410i controller that suddenly won't boot. Using the Inspect Utility, when I go to Array Configuration Info it says "Array information not available." So...
View ArticleHow to configure ILO
HiI have a DL 20 gen 9 server. I have configured ILO with a static address. I cannot see it in the Network on my Windows machine. How to see it ? I would like also to use Remote Desktop to manage...
View ArticleRe: How to configure ILO
Did you configure ILO to use a shared network interface or dedicated?
View ArticleRe: How to configure ILO
Hello Thorsten,i have configured ILO with a shared network interface because there is no dedicated ILO port on this server.Regards.
View ArticleRe: How to configure ILO
AFAIR you cannot contact ILO via network from the local machine if using a shared network (not via the same interface). Does it work from from a different PC?
View ArticleRe: How to configure ILO
HiI am not sure i understand wll. I am using Shared Network port - LOM for ILO4 on this server. I cannot "see" this server from my remote windows machine on the network.Regards
View ArticleRe: RAID array definition lost
The array information is actually stored on the drives themselves and retrieved by the controller during POST. You might try running the array diagnostics utility
View ArticleRe: How to configure ILO
The DL20 has 2 NIC ports, iLO is shared on port 1. Becasue of the shared port you cannot access the iLO from the host OS and must connect to iLO from a different computer. You also need to make sure...
View Articlerebuild mirror sata raid ML310 Proliant
How can I rebuild the mirror in a proliant ml310 server. A couple of days back the primary disk crashed but the system kept running on the secondary disk in the onboard sata raid.After placing the new...
View ArticleRe: Intelligent Provisioning F10 not working now
Verify the md5sum that you have good media. You should be able to boot the ISO image itelf over iLO (if you have the advanced license) or you can create a bootable DVD from teh ISO. I've used this...
View Article207 Memory Initialization Error ml350e gen 8
Evening.i have an ml350 gen8 with 2 processors and 32 gb (16gb 8x2 10600R 1 processor and 16 gb 8x2 10600R other processor) im upgrading up to 96 gb and the post bios restarts 2 times when the hp...
View ArticleRe: RAID array definition lost
Turns out that I was missing the p410i controller failure message because the option ROM messages were not being displayed.1783-Slot 0 Drive Array Controller Failure Command Failure cmd=0h, err=00h,...
View ArticleRe: Intelligent Provisioning F10 not working now
Thanks for your response，1. check with MD5 the media is fine，please see attachment MD5.png2. I reset NVRAM already，an error occurred during recovery 'ERROR flashing the NVRAM' ，please see attachment...
View ArticleRe: DL380 G7 (possible?) firmware bug causes fans to peg at 78%
There are three Seagate disks installed. I have read of problems with HDD firmwares incompatibilities with whatever the internal BIOS is trying to read. If I read the temperatures from the S.M.A.R.T....
View Article