Re: How to configure ILO
google will help you to find a how-to to set the ip address.but you cannot use windows remote desktop (unless you do some modifications to linux), you need something different, e.g. mobaxterm ...
View ArticleRe: How to configure ILO
I have set up static address. But the server is set up also on the same IP address for ILO. Is that a problem ?
View ArticleRe: How to configure ILO
Duplicated IP addresses are always a problem.The IP for the OS and for ILO MUST be different.
View ArticleRe: How to configure ILO
Better to have ILO for monitoring hardware, alerts, remote console, virtual media ... just assign a different IP address.
View ArticleRe: How to configure ILO
I have setup ILO for DHCP dynamic IP address assignement. Is that correct ?
View ArticleRe: How to configure ILO
>> I have never used DHCP>> I have setup ILO for DHCP dynamic IP address assignement Do you have a DHCP server?If not, use a static IP address.
View ArticleRe: How to configure ILO
There is a DHCP server. I have set up ILO for use the DHCP server.On the other hand, I can ping the linux server (I have configured the network) but I cannot "see" it on the windows network.I have...
View ArticleRe: How to configure ILO
So you should now be able to access ILO via browser using the ILO network name.You cannot "see" the server from windows because the server probably does not provide any windows related services.If...
View ArticleRe: How to configure ILO
I have typed the followin command : ssh root@serv-linux1root is the name of the user Adminstrator of Linuxserv-linux1 is the name of the linux serverhe asked three time for the password, I type it, but...
View ArticleDL380p gen8 P420i hard drives not authenticated after firmware update
Hello,I have three ProLIant DL380p Gen8 Servers equipped with one P420i Controller and an additional Smart Array P420 Controller. Since I updated to the most recent fimrware my 15k 146GB SAS drives are...
View ArticleRe: How to configure ILO
Depending on your security settings root login from remote may be not allowed.Logon as a "normal" user and do "su" or configure your system to allow this connection.see...
View ArticleDL20 gen9 add sas support
Hi,I have a DL20 gen9 server without SAS support and want to add 4 sas-hdd.Can i buy a HPE H240 Smart Host Bus Adapter (726907-B21), change disks (HPE Enterprise SAS-3 300GB 10000rpm) and move the...
View ArticleRe: DL20 gen9 add sas support
You probably need the system storage battery too.[Edit] Unlike the HPE Smart Array Controllers, the H240 does not offer any acceleration or support cache modules. The H240 Smart Host Bus Adapter...
View Articleproliant ml10 gen9 displayport no video with active adapter
Hi Guys,Problem I have a ML10 Gen9 new out of box and it will not display video using an ICAN active adapter DP to HDMI 2.0. I have switched through a number of cables including a straight cable DP to...
View ArticleRe: ML10 Gen 9 Video problems.
Hi there,Any resolution to your problem? I seem to have the same issue No display what so ever...
View ArticleRe: proliant ml10 gen9 displayport no video with active adapter
Does this apply?http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c05226637
View ArticleHDD not detected
I want to install a CentOS 6.8 (via kickstart) on an HP Proliant DL360 Gen9 rack server, which has 2 HDDs of 1.2 TB each (not as RAID).At the formatting step, it generates an error because it does not...
View ArticleНет выхода видеосигнала
Добрый день.Были приобретены 2 сервера HP ml 10 gen 9 .Проблема у них одинаковая нет выхода видеосигнала на монитор ни через встроенный display port ни через установленную видеокарту (видеокараты...
View Article