Re: Server hangs before booting
Hi, Start from the basics:Remove any additional Add-On cards thats installed.Remove any external storage connections and or USB storage devices.Try with minimum amount of RAM.Clear NVRAM from the...
View ArticleRe: Cannot install ESXi 5.1, triggered IML Error
Hi, By referring to the file attached "Survey_all_advanced.html", what I could see about "Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 1, Function 0, Error status...
View ArticleCustomize new server
Hi all I need to customize new Prolint servers ,Rack & UPS but the site don't helpful & I can’t add Fiber channel to the servers configuration , any help link or advice ??
View ArticleRe: Customize new server
You may try QuickSpecs that contains the product’s supported options. This would indicate the type and capacity of the HP Options that are compatible with each product. Click here for the QuickSpecs....
View ArticleRe: Customize new server
THX for your fast replay , and thx for this helpful link , but I mean i need easy way to customize the servers and solution for example : I need to customize new HP ProLiant DL320e Gen8 v2 servers...
View ArticleRe: Prolaint DL380 G6 w Smart Array P410i
Already heard something from HP Tech ??? As what I see, is that V6.40 on P410 W2K3 32 and 64 bits is not working. V6.00 on the other hand works.On W2k8 systems (32 and 64bits) V6.40 works.
View ArticleRe: Customize new server
You may try contacting HP support. From the following link select your respective country and choose option "Question before you buy" for options for either e-mail or phone assistance for such...
View ArticleRe: Server hangs before booting
Thank you. Have done as you suggested. I now have one DIMM only in slot 2A. I received the expected messages after maintenance switch 6 turned on. It is now back off. If I disconnect the DVD drive...
View ArticleML350e USB3.0
When are HP going to release a compatible usb3.0 card for these servers. I have purchased the USB3.0 RDX drive but find I can't use it in the ML350 because 3rd party USB3 pci cards cause excess fan...
View ArticleRe: Customize new server
That controller isn't a listed option in the Config To Order process. You can add it to your cart separately. Link to purchase controller...
View ArticleRe: Server hangs before booting
It sounds like you may have a faulty DVD ROM drive or connecting cable causing the boot process to hang.It also sounds like you need more than one DIMM installed. It'll probably need a pair in one bank...
View ArticleRe: RAID 5 on HP ProLiant DL380p Gen8
You cant have larger than a 2TB datastore on ESX3/4 (VMFS3) without adding multiple LUNs to extents. ESX5 overcame this limitation......
View ArticleRe: Proliant ML310e Gen8 making a LOT of noise!
Hi,We are currently testing a ML310e Gen8 v2 server.Same problem here : the fan goes crazy after a few moments.It seems the problem happens only when the storage controller B120i is in used. When...
View ArticleRe: Server hangs before booting
Thanks Mark.Still hangs when I disconnect DVD power and SATA cables.Then the message at hang is the SATA Option ROM. What else could I disconnect?It never gets to the RAID messages.DIMMS are in slots...
View ArticleRe: Server hangs before booting
Ok, I'd try removing the array controller assuming that it is a PCI card.If not, try removing any cache that is attached to either the onboard controller or the PCI slot...
View ArticleRe: Server hangs before booting
No PCI card. Will I need to remove the hard drives? I can see anything in a PCI slot.Tony.
View ArticleRe: Proliant ML310e Gen8 making a LOT of noise!
Check if the firmware of the HP Dynamic Smart Array B120i Controller is the latest. You may use the Service Pack For ProLiant (SPP) to make an offline update of the controller and the hard drives in...
View ArticleWill LO100 firmware 4.26 work on a DL120 G5?
Hi!Can someone tell me if the LO100 firmware 4.26 will work on a D120 G5 or is the LO100 firmware 3.20 still the latest version? Thanks!Danny QuakWageningen University
View ArticleRe: iLO not working on ML310e
Same problem. No iLO Interface. Tried shared on LAN1.DHCP is not working.And I cannot manually edit IP in F8. Any input is highly appreciated.paul
View ArticleRe: Cannot install ESXi 5.1, triggered IML Error
After a very lengthy session with HP support they came to conclusion that we have to disable the C-State function on the processor. This however still does not fix the issue. I have tried the following...
View Article