Re: DL380 G6 Wont boot Virtual Media
DL360 G6 with internal SD card installed. Same issue. Not sure of there is an external USB device installed but quite possible that there is. Disabling external USB ports in the BIOS allowed me to boot...
View ArticleRe: ML350 G5 with an Smart Array E200 fails
I have the same problem. Server: ML350 G5 with E200i SAS controller.With 2 old drives: 2x72GB (DG072BB975) We bought 2 new drivers 300GB SAS (model 507127-TV1): EG300FBVFL Now, when new drives ar...
View ArticleRe: Drives for Raid Configuration
Thanks to all for the answers.I'll buy a bigger drive then.
View ArticleML350 G6, 2012r2 video es1000 driver?
I'm installing Windows Server 2012 r2 on an HP ML350 G6, but I can not install the video carddevice, already used all the resources of SUM, used the SPP 2013.09and version 2008 R2 x64 addtional on the...
View ArticleML350 G6, Win2012r2 video es1000 driver?
I'm installing Windows Server 2012 r2 on an HP ML350 G6, but I can not install the video controller device, already used all the resources of SUM, used the SPP 2013.09and version 2008 R2 x64 addtional...
View ArticleRe: iLO not working on ML310e
In order to manually edit IP addresses in F8, you need to first disable DHCP.
View ArticleRAID VDISK vs Windows Partitions for SQL server
Hi,I am in the midst of setting up a new SQL server(mssql 2005) with two instances on Server 2k8 R2. Below are the specs of my server.HP DL380 G72 x E5649(Hexacore 2.53GHZ)16GB of RAM DDR34 x 600GB SAS...
View ArticleRe: HP ProLiant ML350 G5 Special
Hi Hazam have been looking for your video on you tube but could not find it. could you put the title up so i can find it Many thanks Richard C
View ArticleHP DL360 G8 - restore factory defaults
Hello. I am new to this site. Any help you could provide would be greatly appreciated. We recently received several HP DL360 Gen 8 servers. We had issues resetting the BIOS admin password. Since...
View ArticleRe: RAID VDISK vs Windows Partitions for SQL server
Hi, you assign whole disks to an array (RAID5 or RAID1, etc).Inside the array you create logical volumes (100GB, 50GB, etc). You cannot create a RAID5 and a RAID10 with only four disks.But yes, if you...
View ArticleRe: HP DL360 G8 - restore factory defaults
In short, the "restore back to factory defaults" sets *all* the BIOS settings back to the way they were when the server came out of the factory. (Except the time and date of the hardware clock, of...
View ArticleRe: HP ProLiant ML350 G5 Special
Greetings Richard, you can find the video @ youtube here is the link http://www.youtube.com/watch?v=_g9-v_JQ10w hope you enjoy it
View ArticleRe: Boot Logical Drive is Configured but is missing or Offline
It worked for me too, except the sentence was a bit different for me: controller slot=1 logicaldrive 1 modify bootvolume=none
View ArticleRe: conrep does not really switch BIOS settings
Related to this question, I have a customer who ran "hprcu" when they were running BIOS version P 74 on an SL-230 Gen 8 but noticed that some settings went away when they updated BIOS to P 75 (09/2013,...
View ArticleCollect hardware failures with ILO from different sites without VPN
Currently I'm investigating what the possibilities are for collecting hardware failures from multiple servers on several sites (all separate IT environments without direct VPN connections). We've...
View ArticleHp Proliant DL 320 E Gen8
I just installed a server of model Hp Proliant DL 320 E Gen8 with operating system 2012 standard edition and after 5 days now the server is doing much noise . I have open the server and it seems that...
View ArticleRe: ML350p Gen8 - Hard Drives, SBS and Controller??
Thanks for the info regarding the Seagate Constellation. So, this setup may work?- ML310e Gen8 v2- P420 non hot plug- 4 seagate constallation with caddies 691585-001 Regards,Oliver
View ArticleRe: Hp Proliant DL 320 E Gen8
Hi, This could be issue with the Smart Array controller installed. Refer the following document for more informaion....
View Article