Re: Will LO100 firmware 4.26 work on a DL120 G5?
Hi Danny, Version:3.20 (B) (22 Jun 2010) is latest version available for LO100 in DL120 G5 server. 4.26 is not supported version, this version released for HP ProLiant G6/G7 Lights-Out 100. Regards,...
View ArticleRe: dl185g5 cpu upgrade
After researching the chipset in these systems and learning the chipset at least supported the newer CPUs, I ordered an AMD Opteron 2419 hex-core CPU to test ($29 on ebay). First I tried swapping in...
View ArticleRe: Collect hardware failures with ILO from different sites without VPN
Greetings, this seems to be a big solution, but for making it in a better methode, please update me with a simple diagram about the enviroment with information about the number of servers available
View ArticleRe: windows could not apply unattend settings during pass in windows server...
Greetings Ranjith4385, I would suggest 2 solutions for you, each of which have different solutions, as i am still not sure of the Support of Win2012R2, but i think it is online now.well Solution 1:...
View ArticleRe: HP Proliant 380p G8 P70 Bios
Greetings, Kindly refer to your server, and you can simply update it using SPP.once you run, the SPP, it will compare the available version, and notify you with it and the version it will upgrade too
View ArticleHP Proliant DL 380 G8 Over Temp
Greetings, We have a problem with HP Proliant DL 380 G8 when we plug an HP 1GB P-series Smart Array Flash Backed Write Cache 631679-B21 the server start over- temp, we pluged out the Smart Array and...
View ArticleHP SIM add MIBs and mxmib.exe
Good day!I need to add a new base MIB in HP SIM on Windows Server 2003 32 bit HP ProLiant DL380 G3, but I can not find mxmib and mcompile, nor does it create a folder mibs (c:\ program files\hp\sistem...
View ArticleRe: HP Proliant DL 380 G8 Over Temp
Hi Ahmed,I would assume with your DL380p G8 you're still under warranty...you do not specify what your diagnostics said so I cannot help any more than to say you could try ordering a 631679-b21 under...
View ArticleRe: dl185g5 cpu upgrade
can't help but asking, is this server in business use? or a play toy for you? also, are you saying that the firmware upgraded on its own to the DL165 G6 version?? My business is fixing errors and...
View ArticleRe: ML350p Gen8 - Hard Drives, SBS and Controller??
Bare this in mind before you go running away from HP servers...companies such as mine sell WAY more Dell parts.
View ArticleRe: HP DL380 G4 - Black screen, no post, ilo not working, status led flashing
The reason was broken motherboard, follow the flowchart in case this type of problem, I came to the final stage - replace the motherboard.
View ArticleRe: Watch out there are fake drive Gen8 sleds with non-hp drives on amazon !!
What is fast on ATTO? Do you have any mbytes/s numbers? Thanks
View ArticleRe: dl185g5 cpu upgrade
I work for a non-profit with a pretty small equipment budget. A lot of the hardware we get is donated and also we have limited power available in our hosting location. So I am always trying to take old...
View Articleenabling AES in BIOS on DL380p for VMWare vMotion
Hi everyone,I am trying to enable AES instructions so I can use vMotion in my vMware installation.I have upgraded the BIOS to 18/9/2013 and have looked through every setting but can't seem to find...
View ArticleRe: HP Proliant M110 G6 Reset BIOS will affect RAID 0?
I'm sure resetting the BIOS will reset the embedded disk configuration to "non-RAID" - be carefull.However, I would try to mount the disk(s) to another PC or whatever to try if you can get the data or...
View ArticleRe: Cannot install Firmware for HP EF0600FARNA harddisk
Hello Joern, great, the problem is no cache modul is installed. how can I do an offline update? greetingdaniel
View ArticleClik here to view.
Re: Cannot install Firmware for HP EF0600FARNA harddisk
If you boot the server, you will see the smart array message during POST. If in this line is something like (256MB - see example; 1GB cache module) this is the indicator for the cache module. You can...
View ArticleRe: DL580 G5 fans running at full speed, all LEDs on and won't boot
Fayyaz,I'm unsure what an SPI Board is...I haven't heard that term. However, the problem they're experiencing is usually due to the procs or the main board (sys board) I see that you re seated and...
View ArticleRe: DL580 G5 fans running at full speed, all LEDs on and won't boot
Usually "small" servers have all components on a single system board, but this server has the CPU/memory on the CPU board, the I/O slots on the system board and all external I/O connections, BIOS and...
View ArticleILO Firmware Matrix
Hi I was wondering if there is a matrix for ILO firmware? In my environment I have various models of PL servers from G1's to G8's and the ILO version on them range from the original ILO to ILO 4....
View Article