Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
If you click on the link for the Update itself (The text on the left) or on the 1.57 link or even the older 1.55 version, you are then taken to the page to download it. From there, click...
View ArticleRe: ILO Firmware Matrix
On the driver page, just search for "ilo 2", "ilo 3" etc. ILO (1) (latest version...
View ArticleRe: ILO Firmware Matrix
I meant DL servers not PL!, thanks I am guessing there are no firmware updates for ILO 1?
View ArticleRe: ILO Firmware Matrix
iLO-1 has been End of Life for more than 4 years already. Latest firmware version is 1.94.
View ArticleConfigure ILO to authenticate against AD
I want to configure my ILOEs to use AD accounts instead of individual ILO credentials. But have not been able to find clear directions on how to set that up. Any guidance is appreciated. Thanks
View ArticleRe: BIOS update from a remote location using iLO 100 card - possible?
Dear readers... I finally did the reboot - although I was searching all manuals before posting here, I found no mention of updating BIOS and restarting remotely via Lights Out 100. All of the download...
View ArticleRe: ML370 G4 Tower with Smart Array 6404/192MB, Ultra320 SCSI configuration...
Does it even make sense to put a two disk RAID0 array and a four disk RAID5 array on separate U320 SCSI channels? Are the disks fast enough such that simultaneous reads and writes to multiple...
View ArticleRe: DL580 G5 fans running at full speed, all LEDs on and won't boot
Thanks Torsten, That was the first thing I also checked, unfortunately iLO also not working. I also tired following: Removed all processor to check if Health status indicate anyhthing and it did show...
View ArticleRe: DL580 G5 fans running at full speed, all LEDs on and won't boot
SPI Board is SCSI Peripheral Interface Baord, DL 580 is unlike small servers with one MB, it has three main boards, Processor and Memory Board, I/O Board and SPI Board. SPI Baord contains all...
View ArticleRe: Configure ILO to authenticate against AD
Hi, Have you referred to the iLO user guides? Active Directory prerequisitesSSL must be enabled at the directory level. To enable SSL, install a certificate for the domain in Active Directory. iLO...
View ArticleRe: Illegal Opcode message when trying to install OS
Hi, Is there a numeric code displayed along with illegal opcode?Which version of Debian are you installing? Thank You!I am a HP employee.
View ArticleRe: 1 logical drive failed
Hi, Start from the basics:Is the storage controller being detected during POST?Switch OFF the server, then reseat the Storage cables and controller card if available.Reset the server by clearing NVRAM...
View ArticleRe: ML150 G1 Logical drives problem
Hi, Start from the basics:Is the storage controller being detected during POST?Switch OFF the server, then reseat the Storage cables and controller card if available.Reset the server by clearing NVRAM...
View ArticleRe: HP Proliant - RAID B320i + Disk SAS + Licence key - Disk not found.
So the issue is not related to the license, but to hardware (controller itself, cable, disk backplane).Did you try to put the disks in other slots?
View ArticleRe: HP Proliant - RAID B320i + Disk SAS + Licence key - Disk not found.
Thanks for your reply Torsten.Yes I try this too.For exemple, I try a SATA disk that works on a other server. But I can't test the status of the SAS disk because I don't have another server with SAS...
View ArticleRe: HP Proliant - RAID B320i + Disk SAS + Licence key - Disk not found.
Do you have small or large form factor disks?Since this looks like a hardware issue and your server is new, consider to call hp support.
View ArticleRe: HP Proliant - RAID B320i + Disk SAS + Licence key - Disk not found.
Thanks you for your help.Indeed I will contact HP support. EDIT : I will update the result of HP support.
View ArticleRe: Retrieving P/N on DL380 G5
Thanks Torsen, indeed the link is useful but for some of our servers (DL380G5 was an example because the HW type we own varies) it reports more than one power supplier installable. See...
View ArticleRe: HP ML115 G5 1610 Temperature Violation
I've also had the same issue 610 Temperature Violation on my HP ML115 G5 and the heat sink was also at an odd angle The Heat sink should be flush to the CPU chip It looks like the plastic bits on the...
View Article