Re: HP Ml350e G8 Ram Upgrade Problem
Are you populating the white slots only that correspond to the installed processor?
View ArticleRe: DL380 - network detected as 100MBps not 1Gbps
Hi. Is the switch managed or unmanaged?If it's managed, have you set the port as auto? Have you tried using a different cat6 / 5e cable?Damaged shielding on the cable can cause issues with the detected...
View ArticleRe: Can't Boot SPP-2013.02.00 on DL365 (G1)
I would try to create the USB key drive - maybe a problem while burning the DVD?
View ArticleRe: HP MLXXX with SAS
Are you sure? The following link says its SATA only, that's what confused me....http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/dynamicsmartarray/index.htmlThanks for your...
View ArticleRe: HP Ml350e G8 Ram Upgrade Problem
Hi,Thanks for your reply. yes I have populated the white slots A B and C for proc 1
View ArticleRe: ML350 G6 can't see BBWC
Hi, Just make sure the battery is connected to the cache/controller.Cables are good and correctly routed. Attached is the pic of the server with battery location.The cable length is around 24inch....
View ArticleRe: Upgrading Hard Drives on HP ProLiant DL360 G5 Server - Best Practice
Hi, Depending on the Controller installed, it is possible.The P400(i) with BBWC allows the migration, expansion and extension of RAID arrays via the ACU. There are other ways in which this can be done,...
View ArticleRe: Proliant ml350 G6: Reduce Fan noise?
Hi, Take a look at these two articles, may help you reduce the fan noise....
View ArticleRe: EOL/EOSL
Hi, As for as I know, there is no EOSL, the product will be supported until the parts are available. Here is the link for retired...
View ArticleRe: Hp Proliant ML350 G5 - drivers/firmware
Hi, Its under Firmware - Storage Controller** CRITICAL ** Supplemental Update / Online ROM Flash Component for Linux - Smart Array E200 and E200i1.86 (B), 19 Feb 2013 Thank You!I am a HP employee.
View ArticleRe: GeForce GTX Titan running PCIe 2.0 instead of PCIe 3.0 on ML350p Gen 8
Hi, This might not be a direct answer to your question but still here some findings. HP ProLiant ML350p Generation 8 QuickSpecs states that "The ML350p Gen8 supports up to 3 graphic cards. HP Graphic...
View ArticleRe: Ml110 G7 Fan speed.
Hiya. That's a reasonable assumption if the BIOS is set to have the OS control the fan speed, but the issue remains that on dynamic power mode inside the BIOS , the G7 sounds like a damned mig. We have...
View ArticleRe: HP MLXXX with SAS
Actually now I'm not sure...The ML310e Gen8 quickspecs say that the models with B120i have a "NHP SAS/SATA" hard drive cage, and P420 models have a "Hotplug SAS/SATA" hard drive cage. There's nothing...
View ArticleRe: Smart Array E200
This sounds like good news. I have to replace a failed Smart Array e200 controller which has taken a four-year old server running Microsoft Small Business Server 2003 offline. I'm currently waiting...
View ArticleServer monitor output shows black and white vertical lines, cannot RDP . 3...
My DL380 G5 had three hard drives with amber lights showing failed. I removed the 8th one since its fan was making a really loud noise. After removing it everything on the server still seemed to work...
View ArticleRe: Upgrading Hard Drives on HP ProLiant DL360 G5 Server - Best Practice
Thanks for all the suggestions. Because half of our drives are SATA and the other half SAS, we are going to rebuild the server and re-install everything.
View ArticleRe: Server monitor output shows black and white vertical lines, cannot RDP ....
Three failed drives usually mean a failed RAID, I would suspect you have no windows anymore. Smart Start will not work through RDP. You would have to connect your crash cart and check the array with...
View ArticleRe: HP MLXXX with SAS
So all i should need is the controller to SAS enable the server, the HDD cage and connection cable stay the same (although it wont be hot plug). The downside to this is it adds £300+ to the price of...
View ArticleRe: HP MLXXX with SAS
B120i = SATA only B320i = SATA by default, SAS can be enabled with a license key P series Smart Array are both SAS and SATA The ML310 has the B120i which is SATA only. The drive backplane can handle...
View ArticleRe: Smart Array E200
The array configuration is stored on the disks. The only issue you could encounter is the firmware on the replacement controller being older than what was on the failed controller. In this case you...
View Article