Re: How do I buy HP Smart Array Advanced Pack (SAAP) for ProLiant servers?
http://guenstig-it.de/uploads/bc377a_faq.pdf"What will happen with the HP SAAP 1.0 licenses? HP SAAP 1.0 licenses are not part of this offer and will continue to be sold until the HP Smart Array for...
View ArticleHP System Management Homepage not displaying properties
I have installed the HPE SMH and it's working however it does not display any of the hardware.For example in Component Status Summary it display No items.How do I fix this? My configuration is:HP...
View ArticleRe: limit 2 TB in file system
Hi Jason,thanks for the reply, but I did a write error, I wrote 2003 but instead I already have windows server 2008 R2Sorry for the inaccuracy.Thanks a lot
View ArticleRe: HP iLO Domain Name - can't remove domain name, only change to some other...
Not sure what you mean by "resetting the iLO Factory default". Could you be more specific (as in provide steps)?Thanks....
View ArticleRe: HP iLO Domain Name - can't remove domain name, only change to some other...
what server model?for gen8 and earlier, press F8 during power on sequence and select factory defaults in menu.for gen9 and later press F9 and select the ILO config menu.
View ArticleRe: DL380p Gen8 P420i 1783-Slot 0 Drive Array Controller Failure
Would resetting the BIOS back to defaults be the exact same as SW6 switch or are they different? I just reset the BIOS, rebooted a few times and everytime it gets stuck at the same part no matter how...
View ArticleRe: HP iLO Domain Name - can't remove domain name, only change to some other...
Server model (at least in my case) is a DL360 Gen 9. RIght now, it has a failed System board and is slated to be replaced tomorrow (second HP server--and we only ever had 2 to begin with) who had a...
View ArticleRe: DL380p Gen8 P420i 1783-Slot 0 Drive Array Controller Failure
SW6 does a deeper reset than the RBSU option. Since swapping the cables doesn't change anything, sounds like an issue with the backplane. If you don't have any cables connected to the controller,...
View ArticleRe: DL380p Gen8 P420i 1783-Slot 0 Drive Array Controller Failure
It only seems to hang when I reboot from Windows. If I reboot before Windows (iLO config, Array config, BIOS, etc) it restarts just fine. I will disconnect the cables and install Windows on an SD Card.
View ArticleRe: P840ar Controller in MIXED mode - RAID & HBA
Hi,i am really interested in this topic because i have exactly same problem with p440ar for storage spaces direct.Everything in HPSSA means that there is a mixed mode, but the option are not in the forms.
View ArticleRe: P840ar Controller in MIXED mode - RAID & HBA
The Smart Array controllers for Gen10 ProLiant are the first HPE controllers to support mixed modehttps://h20195.www2.hpe.com/V2/GetDocument.aspx?docname=A00017196ENW
View ArticleRe: HP System Management Homepage not displaying properties
Is all of the other software installed, or at least the agentless driver? Without the agents (or agentless for ILO4 systems) drivers, the SMH can't get any of the hardware details.
View ArticleRe: Install Windows Server 2016 x64
You can probably do it but you won't be able to install some of the drivers.I successfully installed Server 2016 on an old DL380 G5 just to see if I could. If memory serves, I got most of the drivers...
View ArticleRe: Cant connect to ILO4 after Update
That's my guess too, that the ILO config was reset. I had that happen on 2 out of 8 DL380 Gen8 servers when updating ILO4 to 2.54/2.55. Kind of a pain, but I just used the ILO online config in Windows...
View ArticleMonitoring of Physical drive health via SNMP
Hello,I am having issues on multiple HPE standalone servers trying to setup monitoring of physical disk health through SNMP. We use SolarWinds RMM system and I'm able to monitor other physical...
View ArticleRe: P840ar Controller in MIXED mode - RAID & HBA
Nice to know it, sure it's the answer for S2D !But what about "old" gen controllers? is it in the roadmap? everything seems to be ready in HP SSA! :(any CLI option to enable/activate ?
View ArticleConsumer Licenses?
I'm just a guy, who bought a DL360p G8 refurbished server.I would like to install the HPE ESXi Image on the server but from what I ascertain there will be an enterprise license activation required.But...
View ArticleRe: Remote Insight/ Integrated Lights-Out interface error
Hi,It is even happening for iLO4 ( BL460c Gen8 and Gen9) servers with ESXi 6.0 as operating system. we have tried updating latest firmware for iLO but does not help. HP says either update firmware or...
View ArticleRe: HP Proliant DL360 G9 Boot Controler Change
I am aware of this document from HP which tells you to change the boot controler order but i do not have this...
View ArticleRe: Cage for server ML350 G9 (P/N: 765820-421)
Hi There,Could you please kindly let me know the PINOUT for 747592-001 (Micro-fit) as we need to make the cable for it.Also do kindly let me know if you do sell this cable separately.Looking forward to...
View Article