Re: HP DL380 G6 - ilo3?
FYI, there are VMWare drivers for the DL380 G6. Go to the drivers and downloads page for that server and select the version of VMWare you're interested in. It still may not help... if the drives...
View ArticleRe: ProLiant DL380p Gen8 Power Button
What does the IML say when you login to lights out? Are you able to power up from there with the virtual power switch? I once had a bizarre case where the power button got stuck on the front plastic...
View ArticleRe: replace drive in raid 5 in dl380 g7
Since nobody's answered yet, I'll take a guess. I *think* that since you have a hot-spare assigned to the array, it will start rebuilding on there, and even though you'll replace the failing drive...
View ArticleDL160 G6 possible to plug seventh fan?
Have two simple questions:1. My event log says:Fan FAN2_OUTLET Lower Critical 940.4 RPMDoes this mean I should replace fan? Other 5 fans rpm are around 14988 RPM. I check to see if it needs clean up...
View ArticleRe: HP Prolient DL360 G5 Server 2012
I have Server 2012 (not R2 though) on a DL380 G5. This was an install from scratch, not an upgrade so it may depend on whether you did it that way or not.In my dev manager I don't see any missing...
View ArticleRe: HP Prolient DL360 G5 Server 2012
In the end I managed to find the correct 2008 drivers for my Ilo. End result. The message about missing driver has gone. No other difference. I am happy though. Cosma
View ArticleHP ProLiant DL360p Gen8 - Upgrading from 1 CPU +12slots of memory to 2 CPU &...
Hi, is there anything I should take in to consideration when upgrading my hosts? Im running:HP ProLiant DL360p Gen81CPU (E5-2640)8x8GB+4x4GB DD3 HP memory (1333mhz)OS: VMware ESXi, 5.1.0, 1312873 and...
View ArticleClik here to view.
DL320e v2 Performance with P222 thermal shutdown
Hi,Since the get go (December 2013) the PCI Slot 1 temperature for the P222 reporting has been off and states 80+ degreesC. Is it is reporting in F and DL ILO not converting to C?Anyway I thought no...
View ArticleHP ML310 G5p server - SAS drives not detected... please help.
HP ML310 G5p server - SAS drives not detected... please help.Hello,Ive recently bought an old HP ML310 G5p server from a friend, server wich fits my specs need at the moment...I had 2 spare DELL...
View ArticleRe: enabling AES in BIOS on DL380p for VMWare vMotion
Hello, I had exactly the same problem with my new DL380 G8 servers and my olders DL380G6, i cannot vmotion vm because of CPU incompatiblity problem. To make it works, i had to enable EVC compatibilty...
View ArticleRe: Advice - ILO4 Virtual Media on DL380p Gen 8
Hi,I'm experiencing exactly the same issue with my new Gen 8 servers; DL380P and SL4540.I ended up attaching a USB DVD drive directly to the server. This is an utterly crazy situation, especially when...
View ArticleRe: HP ML350 G5 internal & external health leds blinking on front panel
We have four ML350 G5 servers. Two of which are working and two of which are dead with exactly the same problem: both internal and external LED's blinking red and the amber PPM2 LED flashing. We...
View ArticleRe: DL380p Proliant Intelligent Provisioning Failure
Update Intelligent Provisioning to version 1.55ftp://ftp.hp.com/pub/softlib2/software1/cd/p803090897/v93047/HPIP155.2013_0927.2.iso
View ArticleRe: Alter temperature warning threshold on Proliant servers (gen 8)
Got a reply from HP support, and apparently these figures can not be altered....
View ArticleRe: New 1Gb Broadcom Multifunction Win64 driver (7.8.6.0) is buggy
I'm a little shocked that HP hasn't addressed this issue yet, considering it must be affecting a lot of customers who installed the latest driver. So if you did (for some reason) want the latest driver...
View ArticleGracefull Thermal Shutdown on RHEL (6.x)
Evening! Have installed RHEL 6.5 on a ProLiant DL360p Gen8. Have managed to get the system to do a gracefull shutdown on Windows by installing ProLiantMonitor (HP ProLiant Health Monitor Service) and...
View ArticleRe: DL320e v2 Performance with P222 thermal shutdown
The P42x cards do run very hot. Their setpoint in iLO is 85ºC and iLO uses its PID (Proportional Integral Derivative) algorithm to control the system FANs and keeps the card at or below 85ºC all the...
View ArticleRe: New 1Gb Broadcom Multifunction Win64 driver (7.8.6.0) is buggy
Have you tried the new driver 7.8.50.0?Fixes:This driver corrects an issue that could result in halted traffic when configuring jumbo frame size to 9000.This driver corrects an issue that could result...
View ArticleRe: DL320e v2 Performance with P222 thermal shutdown
Okay so it is RAID5 but it's sitting there mostly idle. All other components are running at around 30-40 in an ambient of 19 - first time last night the ILO email alert came through. T-Op to T-Max is...
View ArticleRe: DL320e v2 Performance with P222 thermal shutdown
Unsupported drives could be an issue. The P222 card performs surface scan on the drives while the array is in idle and this process is enough to keep the card warm. The Slot-2 on that system is PCIe...
View Article