Re: ProLiant ML350 G4P and VMWare
Thanks, Jimmy. I have both enabled but I found an article that said to disable the Hyper-Threading to get it to work. I will that a try. Seems weird but I had to disable the RAID in the BIOS to get...
View ArticleRe: ProLiant DL785 G5 Firmware Update
Ended up booting the disc from the OS and it worked fine. I don't know what the deal was but I ended up getting it installed. Thanks for the help.
View ArticleServer halt one in 3-4 days.
If it is a real temp. issue. System would not be able to run for couple days, but it halts down dues to high temp. issue. System log is attached. One fan is missing. But it has been runing so for more...
View ArticleRe: RAM compatibility
that spare memory ..is it from a G8 blade? if it is G8 smart memory it should work together and just kick it up from the low voltage. If you know that p/n i can better help.
View ArticleRe: ProLiant ML350 G4P and VMWare
Per page 6 of the server documentation (://h18004.www1.hp.com/products/quickspecs/12199_div/12199_div.pdf), the server may require the Virtual Machine Management Pack to assist with virtualization. I...
View ArticleRe: ML370 G4 cooling problem?
Just opened one of ours, found the same issue. The clip on the restraining arm popped off the motherboard (the one without the handle to attach the arm to the clips). Server's still running, and I...
View ArticleRe: Internal SAS Enclosure Device Failure (HP DL380 G6 E5504)
Hi RattanKanna, I'm not sure about your case FBWC, Capacitor.For my case, the replacement HDD is defective before i installed it to the server.You can look at the post on 12-15-2013 07:09 PM Replaced...
View ArticleRe: ProLiant DL785 G5 Firmware Update
Great! Thanks for reporting back how it went! There is a way to mark a thread as solved if you want to do that too.
View ArticleRAID Logical Drive needs recovery
Hi all, We have a Proliant DL380 G7 and we use it as a standalone ESXi host. We have RAID 1+0 setup with 6 x 300Gb drives. The ESXi OS runs on a USB or SD card, so the logical drive is purely used as...
View ArticleRe: HP not supporting recent servers in ESXi 5.5 - WHY?
Is there an official answer from HP?We have 5 DL585 G6 hosts, which are between 3 and 4 years old.But now I can't upgrade to the newest ESXi Version? That is, IMHO, not very nice.
View ArticleDL320 Gen8 v2 and SAS2 15k disks
Hi, Why I can use SAS2 15k disks with P222 controller on 320 v1, 360, 380 servers, but can`t use them on 320v2 servers?http://h18000.www1.hp.com/products/quickspecs/14563_na/14563_na.pdf Thanks
View ArticleLightOuts connection resets.
I am behing a nat using internal ip. (Not sure if it is firewall or port forwarding issue) When virtual media is active, I am getting; com.serverengines.rdr.BadlOException: java.net S ocketException:...
View ArticleRe: HP not supporting recent servers in ESXi 5.5 - WHY?
I agree...I have the same issue with our G5 servers, for which I am having difficulty determining a good upgrade rationale since they are doing fine with vSphere 5.0U3...and yes I know 5.5 is much...
View ArticleHP ProLiant blade server can not be powered on
The tray has two servers. One of them can not be powered on. The power button/LED remains yellow while the other working one immediately turns green. The monitor shows no activity at all. The type is...
View Articlehow to remove hp proliant gen8 rack rail
on the video here from hp it shows how to clip in the rack rails into the server easily. What it doesn't show is how to remove the rack rail from the rack. at this point in the video...
View ArticleRe: how to remove hp proliant gen8 rack rail
I've never run into a situation where I wasn't able to reach the tab to remove the rail from the rack/cabinet, but I tend to leave 1U of space between servers if I have that option.If you're racked to...
View ArticleRe: Remove iLO License Key
I use the command line config (cpqlocfg.exe) to manage some of my management processors... I have a script to add a license key, but I don't know if the same would work if you just leave the key...
View ArticleRe: how to remove hp proliant gen8 rack rail
That is one of the possibilities I was thinking of, but like you said waaronb, the tab is very stiff, I doubt a paper clip would cut it. Removing and installing rack rails should be trivial matter,...
View ArticleRe: ProLiant DL360 G6 Processor Addition
It should pop in. I haven't seen the need for an additional VRM module in the DL series since maybe G1 or G2. Something like that.The G6 definitely doesn't need one. It does need all of the fans...
View Article