Re: Proliant ML350 E200i SmartArray Controller Fails To Initialise
It's not a bad idea to pickup a spare P400 on ebay for $25 and get a new battery. The older P400 won't work without a cache board. The P410 of course will work without a cache board, just not a wise...
View ArticleRe: ProLiant e200 Slow Write on RAID 5
yes;buy a P400/512 BBWC, throw it in place, enjoy far faster speeds! ebay prices are ridiculously low!
View ArticleProLiant ML350 G4P and VMWare
I have this server running Server 2008 x64 and installed VMWare 10, but when I try to spin up a 64-bit OS in VMWare, it says it cannot do it and the system would need to be in long mode. The Intel...
View ArticleRe: ProLiant ML350 G4P and VMWare
http://ark.intel.com/sv/products/46490/Intel-Xeon-Processor-E7520-18M-Cache-1_86-GHz-4_80-GTs-Intel-QPI sure looks like the Intel Xeon E7520 has intel Virtualization in it. It is enabled in the...
View ArticleRe: ProLiant ML350 G4P and VMWare
Thanks. Good to know. Can you point me to where this is set in the BIOS to verify that it is on? I assumed it was on because VMWare installed, but still can't spin up a 64-bit OS as a client.
View ArticleRe: HP Lights Out 100 Offline Firmware Update Error
>In scexe between 147 - 155; What does the first few lines look like? Is there a #! line to set the shell.
View ArticleRe: Replacement drive has a faster speed, 15K. ML350 G5 using smart Array...
It is okay to mix 10k and 15k drives in the same array. http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/mixing-10Krpm-and-15Krpm-for-RAID-1/td-p/4083648#.Uu7YV_ldWrA
View ArticleRe: DL380 G4 Fan Noise Very Loud
Hi, In some scenarios the fans spin at full speed if:There are no hard drive blanks or power supply blanks in place.Any un supported pci cards installed.Un supported operating system like Win 2008 R2...
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
Quick update: This is the same issue that affected the Microserver Gen8 (solved with a new ROM).I'm contacting the ML310e team to get a solution for this model.
View ArticleRe: ProLiant ML350 G4P and VMWare
I just ran the SPP and tried updating everything, but getting the same results. Are there any logs or items I should post to this thread to help see if something is misconfigured? Thanks. Oh, when...
View ArticleRe: ProLiant ML350 G4P and VMWare
A quick googling shows others with similar problem like you....
View ArticleRe: ProLiant ML350 G4P and VMWare
No. I'm running Win Server 2008 R2 x64. I tried to create a 64 bit VM and VMWare 10 barked about the server not having a 64 bit OS and something needs to be in "long mode" in the BIOS (which I assume...
View ArticleRe: ProLiant ML350 G4P and VMWare
Johan, thanks for the links. I noticed that in my BIOS, I'm missing the Intel(R) Virtualization Technology option in the BIOS. Per the specs of the E7520 that I read, it supports virtualization. So...
View ArticleRe: ProLiant ML350 G4P and VMWare
Not sure where the limitation lies if the CPU has intel virtualization so, BIOS or some other chipset? Anyway seems like the hardware virtualization is a no-go, perhaps para-virtualization works at...
View ArticleRe: DL380 G8 fans.
Well I called HP and I'm actually still on the phone with them right now. It's been about 2 hours and the problem is still not resolved. The tech I spoke with conferred with Level-2-Support several...
View ArticleRe: ProLiant ML350 G4P and VMWare
Hey Johan. Thanks for the information. I will downgrade to Win 2008 to see if it resolves some of the quirky issues I've been seeing. Thanks.
View ArticleRe: DL380 G8 fans.
The DL380e Gen you have is the "Storage" model that has parts that are not included in the standard (non-Storage) DL380e Gen8 model. As I mentioned earlier, you need the entire Drive cage and Hood (not...
View ArticleRe: ProLiant ML350 G4P and VMWare
Even thought the Chipset/CPU combination may support Intel VT-D, I don't think it was enabled in the system ROM. According to the QuickSpecs for that model, this is stated about the CPU "Processors...
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
Oscar A. Perez wrote:Hi Norby, 56% FAN speed is a lot more than the 29% that I'm getting with my unit. Have you tried going into the ROM setup and selecting "Optimal Cooling"? Go to Advanced...
View ArticleRe: HP Lights Out 100 Offline Firmware Update Error
I updated it with some other way thank you.
View Article