Re: ProLiant ML350 G4P not seeing disc drives during Server 2008 Installation
I was able to resolve this item by using a SmartStart CD (8.5) for the OS installation and by disabling the RAID in the BIOS for the Windows installation to see the drives. Hope this helps someone out.
View ArticleRe: HP DL320e
Hey, Depending on which controller is installed in your server you can find out which drives are supported.For example if you have a p222 configurations you can refer to :...
View ArticleRe: bad disk sub-system
Hi, When I ran the ADU, i see that the Smart Array P400 in slot 1 - cache is temporarily disabled. Also looks like the battery has been discharged. When I run ACU, i see the following error: "263 Smart...
View ArticleHow do I remove the iLO Advance license from my MicroServer Gen8?
I wish to remove the iLO 4 Advance license from my MicroSever Gen8. How can I do it? Thank you
View ArticleDL380 G4 Fan Noise Very Loud
Hello all, I have been scouring the internet for weeks and have found many posts, but no solutions for the aweful 100% fan speed noise on my DL380 G4. I am pulling my hair out trying to find a way to...
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
I am awaiting some news on this issue as well. I wrote a post in the MicroServer thread (we have one of those), but we are looking at getting a DL320e v2 also for another application. The...
View ArticleML350 G5 low performance with E200i (single drive)
I got myself a ProLiant ML350 server equipped with an embedded 200i raid controller but I'm pretty disappointed with the onboard SAS/SATA controller's performance.Since I don't plan to use RAID (it's...
View ArticleRe: RAM compatibility
Ram is a bit of a sensitive creature. Since they are both PC3-1600 they should work together (as long as both are ECC). In the BIOS if you can set ram timings, you will need to set the timings listed...
View ArticleHP Lights Out 100 Offline Firmware Update Error
Do you have any idea; root@vztl6:/# ./CP021014.scexe ./CP021014.scexe: 153: [: ./CP021014.xml: unexpected operator ./CP021014.scexe: 151: ./CP021014.scexe: pushd: not found ./CP021014.scexe: 159: [:...
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
I just discovered that my post got a new thread... I take screenshots on monday as I get back to the office.
View ArticleRe: Info about Fan
fishy007 wrote:Hello Norby, Do you have a P420 SAS contoller in your server? I've got a DL380e G8 and I have a problem with fan noise as well. No, it has B120i controller.
View ArticleRe: ML350 G5 low performance with E200i (single drive)
> is there any workaround to enable WB cache even if the battery isn't good? No, that will enable data loss if there is ever a power failure.
View ArticleRe: HP Lights Out 100 Offline Firmware Update Error
./CP021014.scexe: 153: [: ./CP021014.xml: unexpected operator./CP021014.scexe: 151: ./CP021014.scexe: pushd: not found These look like sh or bash shell errors.What are the first few lines of that file?
View ArticleReplacement drive has a faster speed, 15K. ML350 G5 using smart Array E200i...
Hello,My ML350 G5,smart Array E200i is configured using a Raid 5 with a hot spare, 4 drives total. All 4 drives are HP 10K, SAS, 72 Gig. I have a Replacement drive which has a faster speed: HP drive...
View ArticleRe: Proliant ML350 E200i SmartArray Controller Fails To Initialise
I just had the same issue. I was told one of these three parts was my problem: battery, 128MB battery-backed write cache (BBWC) or system board.My issues was a bad drive.
View ArticleRe: ML350 G5 low performance with E200i (single drive)
Thank you for your reply, what do you think about the performance - is it normal for this controller?
View ArticleRe: HP Lights Out 100 Offline Firmware Update Error
In scexe betten 147 - 155; local file="./[cC][Pp]0*.xml" local TMP=./tmpfile.txt local JUNK pushd $1 &>/dev/null if [ ! -f $file ] then
View ArticleRe: ML350 G5 low performance with E200i (single drive)
you want to ditch this controller ASAP. It is a Piece of junk compared to the bigger brother!You cannot passthrough an SSD without using an HBA i'm afraid.
View Article