The H240 is primarily designed as an HBA but has some simplistic RAID abilities. It has no battery or cache module therefore I believe does not support expansion of existing RAID groups at the controller level.
↧
Re: Array Expand Issue
↧
Re: ML370 G5 Dsk issue
I really doubt the credentials, intentions and IQ of people who support DSK and his criminal enterprise .
↧
↧
Re: SHA2 Support on HPE Proliant DL 380 Gen8/9 servers
Hello,
It seems that we do not have the freedom to select the type of encryption required in iLO4 even if it supports the SHA2 enryption.
Hence requesting you to import the <CSR.txt> file information to the CA server and then see if there is any option to select the SHA2 encryption.
Please provide us with the outcome on the same once done.
Regards,
Shruthi (HPE Employee)
----------------
Was this helpful? Like this post by selecting the Kudos option below!
↧
Re: DL380e Gen8 Not Recognising Hardware
Hi,
Please update to latest version of AMS,
* RECOMMENDED * Agentless Management Service Offline Bundle for VMware vSphere 6.5
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_d27d293754034c7ab997fd6798
Reboot the server (Ensure that AMS service is running.)
Reset ILO, and check the status.
If still issue persist, please raise a case with HPE.
Regards,
Sudhir
↧
Re: HP Smart Array P431 Post: 1785-Slot 2 Drive Array Not Configured
Hi Silvio,
No, since we do not see P431 in supoprted adapters list for MSA2050.
MSA2050 Quickspec
https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00008276enw
Regards,
Sudhir
↧
↧
Re: Latest SPP for Proliant DL380/DL60 G9
No, SPP2018.06 Doesn't work with DL60 G9.
↧
Re: SHA2 Support on HPE Proliant DL 380 Gen8/9 servers
Hi Shruthi,
Thanks for your suggestion. I will check with respective team on this will share the update.
Can you please suggest the procedure for Importing a CA signed Certificate for HP MSA 2000/2040 Storages ?
↧
Array Controller
I have Hp server Dl180 g9 with 6X1TR storage and i want to use this server as (SQLERVER) what is the best way to partshion this server which Raid feature i can use
↧
Re: Latest SPP for Proliant DL380/DL60 G9
Hi There,
As per the SPP server support guide, the SPP 2018.06 is supported on both the mentioned servers i.e., DL60 Gen9 and DL380 Gen9.
You could search for the same in the SPP Server Support Guide : https://downloads.hpe.com/pub/softlib2/software1/publishable-catalog/p466243357/v138523/SPP2018.06.0ServerSupportGuide.pdf
Please let me know if any further concerns.
Regards,
Shruthi (HPE Employee)
----------------
Was this helpful? Like this post by selecting the Kudos option below!
↧
↧
ML350 Gen9 High CPU Fan Speed
Hi, i have one ML350 Gen9 Server on a small shop and we are facing high Fan speed (and noise). Every few minutes the server's fans are running at high speed making the people working there feeling discomfortable.
The temperature of the system is relative low (from 23 to 46 degrees Celcious and the systems firmware is 2018-03 . I 'm aware of this article
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00008294es_es
but we have the newest controller firmware (6.60).
Any advice?
Thank you in advance, George
↧
Re: ML350 Gen9 High CPU Fan Speed
Have you monitored the temperatures in iLO to see what sensor may be increasing the fan speed? What % are the fans shown to be operating at? Is the sysem running any high load tasks? A lot of variables can cause the fans to speed up
↧
CentOS 7.5 Installation on a HPE DL 380 Gen9 Server.
Hi,
Anyone can help on, CentOS 7.5 Installation on a HPE DL 380 Gen9 Server. I cann't install it due to display video issue.
Thanks.
↧
Re: CentOS 7.5 Installation on a HPE DL 380 Gen9 Server.
What is the issue you are experincing? 7.5 should install without issue on Gen9 servers
↧
↧
Re: ProLiant DL20 Gen9 Loud Fan 3
All firmware updated, System runs fan 3 at 100% all the time. Temp sensors are all good.
Sound is driving me nuts. ANy help resolving this would be appreciated.
↧
Re: SHA2 Support on HPE Proliant DL 380 Gen8/9 servers
Hello,
Please refer to the SMU user guide which has the steps mentioned in order to install a certificate.
You could refer to Pag 309 "Installing a Security Certificate" : https://community.hpe.com/hpeb/attachments/hpeb/bsc-257/10119/1/HPE%201040-2040%20SMU%20Reference
Please let me know if any further queries.
Regards,
Shruthi (HPE Employee)
↧
dl370 g6 heatsink latches
Hi, how do i find heatsink latches for dl370 g6? :(
↧
Re: DL360 Gen7 ILO3 unable to load resource
The solution is exactly right to the point where it needs to be.
↧
↧
Re: Array Controller
Hi,
I think its better to ask Microsoft regarding the setup. Follow the recommendations for SQL Server setup.
https://docs.microsoft.com/en-us/sharepoint/administration/storage-and-sql-server-capacity-planning-and-configuration
https://support.microsoft.com/en-hk/help/2023571/recommendations-and-guidelines-on-configuring-disk-partitions-for-sql
Thank You!
I am an HPE Employee
Was the post useful? Click on the white KUDOS! Thumb below. Kudos is a way of saying thank you to a post.
Useful Links for ProLiant Servers
↧
Re: dl370 g6 heatsink latches
Hi,
Are you referring to ML370 G6 "Latch type processor heatsink assembly"?
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02167151
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c01714539
Latch type processor heatsink assembly - Latches to the system I/O board assembly (508996-001)
Thank You!
I am an HPE Employee
Was the post useful? Click on the white KUDOS! Thumb below. Kudos is a way of saying thank you to a post.
Useful Links for ProLiant Servers
↧
Re: dl370 g6 heatsink latches
Im need only latches for heatsink or latches with heatsink (not only heatsink)
↧