Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Viewing all 30225 articles
Browse latest View live
↧

Replacement drives detected or previously failed drives now appear to be operational. What to do?

December 24, 2017, 12:30 am
$
0
0

Hi,

I have a DL380 Gen8 server which is connected to an enclosure. To a power loss event, server shut down and after boot I'm receiving this error message:

Replacement drives detected or previously failed drives now appear to be operational.

Logical drives disabled due to possible data loss.

Select F1 to continue with logical drives disabled.

Select F2 to accept data loss and to re0enable logical drives.

I haven't changed any disk and all disks appears to be healty and led is green. is there any possible data loss? what can I do before re-enabing logical drives??

 

↧
Search

Re: firmware-netxen_20161130-3_all.deb

December 24, 2017, 8:43 pm
↧
↧

Proliant DL380 G9 health led blinking amber

December 25, 2017, 4:14 am
$
0
0

hi,

 

I noticied  that  one of my servers is  on degraded mode as the health  let is  blinking amber , advice please what steos  to  troublshoot  that.

power is  ok

 

 

 

↧

Pinout for DL580 10pin PCIe Power Cable

December 25, 2017, 4:10 pm
$
0
0

Hi,

i need the Pinout for the 10pin PCIe Power Cable. I bought the wrong cable and I want to change the pins of the wrong cable.

thanks

↧

HP Server ML 10 G9

December 23, 2017, 3:15 am
$
0
0

Dear Sir \ Madam,

Please I have HP Server ML10 G9, I face Problem with the error 41 Kernal Power and my server hanging or restar suddenly how can I solve this problem as sson as possible?!

 

Plus to all ther drivers in HP website not working as well??!!

 

Best Regards,

Raghad

↧
↧

HP DL 380 G6 system shutoff when power goes out

December 25, 2017, 10:49 pm
$
0
0
I have a HP DL 380 G6 that it is connected to a APC UPS Pro 1500 and once the power is lost from utility the server shuts off then on the information panel it complains about the power supply’s being bad though I can press the power button and it boots fine

A HP DL360 G6 and the same model of UPS has no issue with power loss.

HP DL380 G6 Specs -
Two X5670s
72 GB of RDIMM memory
Two 750 Watt power supplys with power cap enabled
8 146GB SAS dual port 10K drives
↧

HP Proliant G5 DL380 Server

December 24, 2017, 12:51 pm
$
0
0

Hi I have a G5 DL380 Server with a problem I am hopping that some one may be able to help.

The server has all fans on full speed but nothing from the Monitor, CD rom or hard drives. No post sounds eather, All Lights are off except the power button is green.

I have added a new CPU and CPU power thing ( lol ) added more Ram and changed the raide card Battery thats it, but still no post.. What could be wrong?

↧

Re: HP Proliant G5 DL380 Server

December 24, 2017, 10:29 pm
$
0
0

> [...] nothing from the Monitor, CD rom or hard drives.

   What does "nothing from" a hard drive mean?

   Are there LED indicators on the main board?  Have you found a manual
for this system?

> I have added a new CPU and CPU power thing ( lol ) added more Ram

   Added or replaced?  Why?

> [...] but still no post.. What could be wrong?

   Almost anything.  Did this system ever work?

↧
Search

HP DL380 G6 P410i smart array wont get enabled in the bios.

December 26, 2017, 3:42 pm
$
0
0

Every time I enable the smart array in the bios of DL 380 G6 and save the changes with F10 and the server gets rebooted, the smart array gets disabled like nothing happened. I'm able to change other things in the bios and it's being saved normally except enabling the smart array. 

↧
↧

Re: HP DL380 G6 P410i smart array wont get enabled in the bios.

December 26, 2017, 4:23 pm
$
0
0

I upgraded the Bios Firmware to the latest and booted with smart start CD and still same issue. Also, I dont get F8 option when the server is booting. Did anyone experience this issue before? 

↧

Re: HP DL380 G6 P410i smart array wont get enabled in the bios.

December 26, 2017, 4:36 pm
$
0
0

the boot is not showing the smart array icon. I attached a photo showing the issue 

↧

Re: HP DL380 G6 P410i smart array wont get enabled in the bios.

December 26, 2017, 4:36 pm
$
0
0

the boot is not showing the smart array icon. I attached a photo showing the issue 

↧

Re: Xeon L5630 in DL360 G6

December 27, 2017, 12:05 am
↧
↧

Re: How to check SPP version installed?

December 27, 2017, 12:10 am
$
0
0

Sorry but i tried that months back that didn't work and then i did research and came up with my way. The one which i posted below.

↧

DL380Gen9 Server PCI NUMA allcation

December 27, 2017, 12:43 am
$
0
0

Hi,

 

We have a DL380Gen9 Server with 24CPU's and two threads of 12CPU each, loaded with Ubuntu[14.04.1]. We have loaded the PCI slot with NIC's and when checked for NUMA node for PCI's slots, i could see all the NIC's are mapped to single NUMA node (/sys/class/net/*/device/numa_node). Which should be expected, am i correct?

Is there any way we can allocate NUMA node for PCI from diffrent Node?

 

# numactl --hardware
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 24 25 26 27 28 29 30 31 32 33 34 35
node 0 size: 128870 MB
node 0 free: 107714 MB
node 1 cpus: 12 13 14 15 16 17 18 19 20 21 22 23 36 37 38 39 40 41 42 43 44 45 46 47
node 1 size: 129021 MB
node 1 free: 101244 MB
node distances:
node 0 1
0: 10 21
1: 21 10
# numactl --show
policy: default
preferred node: current
physcpubind: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
cpubind: 0 1
nodebind: 0 1
membind: 0 1
#

# cat /sys/class/net/*/device/numa_node
0
0
0
0
0
0
0
0
0
0
0
0
0
0
#

↧
Search

Re: Add NVMe SSD to HP DL360e Gen8?

December 27, 2017, 3:16 am
$
0
0

Are one able to place Intel DC P3500 into ProLiant DL360R5 X/5160 - 2 GB (partnumber 416566-421) to accelerate running Microsoft SQL Server and Windows 10 Professional on that ProLiant?

https://attendee.gotowebinar.com/recording/2662913092170962690

Short answer with yes or no is okay. Maybe verfitication if this accelerates exitent OS and databases by so that one would see it imedatly or if this is nonsense.

regards,

Dirk

↧

Re: Proliant DL360 G8 & Server 2012R2

December 27, 2017, 4:14 am
↧
↧

ML350 G4 BIOS UPDATE for a private project

December 27, 2017, 2:15 pm
$
0
0

Hi everyone

I'm new at this site, I found an older hp ml350 g4 server, i want to use it for a private project, but i dont have an enterprise account so i can get access to https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_e2d7c3a480d14cc99dbafb2981&lang=en-us&cc=us#tab-history to update the bios. Looking at the website i need some kind of enterprise servicing contract with hp to access the files, is there a way to get the files as a private person? 

I would be gratefull for any directions.

 

Thanks!

↧

Re: Pinout for DL580 10pin PCIe Power Cable

December 27, 2017, 6:10 pm
↧

Firmware update on Linux

December 23, 2017, 3:46 am
$
0
0

I am trying to update the firmware on my ML10 Gen9. It is running Arch Linux, fully updated.

I downloaded the firmware package from the HPe website, did the sha256sum check which matched.

The instructions are wrong and make no sense, but luckily its no rocket science. I run the script as root. It dumps the following blurp. I checked the script all it does is chmod 777 on the executable and run it with some parameters. I tried running it manually and tried /h or --help. it allways outputs this blurp:

/data/software/Linuxflash_with_BATCH/.temp/amifldrv.c:42:1: warning: data definition has no type or storage class
 module_init(amifldrv_init_module);
 ^~~~~~~~~~~
/data/software/Linuxflash_with_BATCH/.temp/amifldrv.c:42:1: error: type defaults to ‘int’ in declaration of ‘module_init’ [-Werror=implicit-int]
/data/software/Linuxflash_with_BATCH/.temp/amifldrv.c:42:1: warning: parameter names (without types) in function declaration
/data/software/Linuxflash_with_BATCH/.temp/amifldrv.c:43:1: warning: data definition has no type or storage class
 module_exit(amifldrv_cleanup_module);
 ^~~~~~~~~~~
/data/software/Linuxflash_with_BATCH/.temp/amifldrv.c:43:1: error: type defaults to ‘int’ in declaration of ‘module_exit’ [-Werror=implicit-int]
/data/software/Linuxflash_with_BATCH/.temp/amifldrv.c:43:1: warning: parameter names (without types) in function declaration
/data/software/Linuxflash_with_BATCH/.temp/amifldrv.c:22:13: warning: ‘amifldrv_cleanup_module’ defined but not used [-Wunused-function]
 static void amifldrv_cleanup_module(void)
             ^~~~~~~~~~~~~~~~~~~~~~~
/data/software/Linuxflash_with_BATCH/.temp/amifldrv.c:14:12: warning: ‘amifldrv_init_module’ defined but not used [-Wunused-function]
 static int amifldrv_init_module(void)
            ^~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[2]: *** [scripts/Makefile.build:315: /data/software/Linuxflash_with_BATCH/.temp/amifldrv.o] Error 1
make[1]: *** [Makefile:1504: _module_/data/software/Linuxflash_with_BATCH/.temp] Error 2
make: *** [Makefile:8: default] Error 2
10 - Error: Unable to load driver.

 

Can anyone help me make sense of this so i can upgrade to the latest firmware please?

 

Thanks!

↧
Viewing all 30225 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>