Hello,
I have a problem with one of the system disks, configured as a RAID1 Logical Drive. The warning message says:
Code:
272
Description:
The current array controller has a bad or missing drive.
(Interim Recovery) Logical Drive 1 (136.7 GB, RAID 1) is operating with reduced performance and a further physical drive failure may result in data loss depending on the fault tolerance.
Configuration changes to this logical drive or any other logical drive in the array are not allowed until this problem is corrected.
To correct this problem, check the data and power connections to the physical drives or replace the failed drive. For more information, generate a diagnostics report under the Diagnostics tab.
Can I replace the failured unit with a new one with the server running, without loosing any data?
Thanks!