Clik here to view.
Re: ML350 Gen8 - Supply power to PCI Express
2 HDDs may be a bit too much ... while investigating this I probably found the reason why my fingerprint driver did not work since months ... Look out the device manager properties:
View ArticleMemory upgrade fails ML110 G6
Hello I tried to upgrade my memory on my HP Proliant ML110 G6. I bought 2x Kingston KVR1333D3E9S/8G 10600E CL9 ECC Unbuffered Unregistered. No matter what I do the server won’t start with these two...
View ArticleDL380 G8 - 2 hard drive cages with RAID 10 ?
Hi, does anyone know if it is possible to have a DL380 G8 Server fitted with 2 internal hard drive cages configured for RAID 10 using 12 drives (8 drives in one cage 4 in the other) ? We have done this...
View ArticleRe: DL380 G8 - 2 hard drive cages with RAID 10 ?
I'm assuming you're talking about the model of the box that comes with 8SFF bays, with the addition of the 2nd 8SFF drive cage.The DL380 gen8 can also be ordered with 12 (I think) LFF bays or a 25 SFF...
View ArticlePower Supply warning on ML 350
HP System Management shows "Bay1: Power Supply Status: Inlet Temp High Warning"Not sure what happens and how to resolve this issue.Thanks.Steven
View ArticleRe: Memory upgrade fails ML110 G6
If it starts up at all then it's probably recognizing the memory okay. The fact that it blue screens later sounds like the memory is bad or not fully seated or something.The specs on the memory seem...
View ArticleProLiant DL380 G6 with Smart Array P410i, system disk failure
Hello, I have a problem with one of the system disks, configured as a RAID1 Logical Drive. The warning message says: Code:272 Description:The current array controller has a bad or missing...
View ArticleStorageWorks D2600 and DL580 Gen8
Hi there, I have just been handed a new HP DL580 Gen8 and StorageWorks D2600 and asked to configure them quickly. The issue I am facing is the D2600 is not recognized by the DL580. I have connected the...
View ArticleRe: HP ML 350 G8 SERVER fan issue
Can you please tell me how to check the firmware of iLO4 firmware. It is difficult to restart the server and check bios. Is there any other way?And we have not installed any add on cards inside the...
View ArticleHP Proliant DL380 G6 with HP 1.28TB Multi Level Cell PCIe ioDrive Duo
Hello guys, I've buyed an HP 1.28TB Multi Level Cell PCIe ioDrive Duo for my Proliant DL 380 G6. This board absorb 25W from the PCI-E bus, but require an external power to reach the best performace...
View ArticleRe: Proliant DL380 G6 : ILOG log Server power removed
This Link isnt working for me, Is it possible you can send me the patch? allen[at]cyfordtechnologies.comThanks in advance
View ArticleRe: Server (ML350 g5) reboots every weekend at random time
i have a ProLiant DL580 G5 And i am experiencing the same thing. My server has Redundant Power 3 sockets and 1 ups... all other servers and switches are fine
View ArticleRe: Proliant DL380 G6: ILOG log Server power removed
>This link isn't working for me These are links in the the previous version of the forum. This is the likely...
View ArticleDL380 G7 - Windows 2008 R2 Hyper-V Terminal Server - Poor Graphics Performance
We have a client with an HP Proliant DL380 G7 Server which we are having some problems with. Hyper-V is used with Windows 2008 R2 to deploy 4 Virtual Servers. The virtual that is causing the problem...
View ArticleRe: SmartStart CD for Windows Server 2008
Thanks to everyones comments I notice that I was using a 32 bit and not a 64 bit and that was my problem. Some times a second eye or comment can be a big help. Thanks you all
View ArticleHP SUM 6.41 installtion help
Hello, I'm trying to install HP SUM 6.41 on windows 2012 VM, i mounted ISO of HP SUM 6.41 ,copy all files and run HPSUM.bat .I started to add nodes and i noticed that if i restart my machine all my...
View Articlemsa 60 latest firmware...
Hey all, i use a MSA60 tith an sc44ge HBA under FreeBSD. But my Disk (all new) are faulted every 5min. i hope that an Firmwareupgrade will solve my problems. What is the latest Firmware and how can i...
View ArticleBIOS updates require a paid-for contract
I realise i am a little late to the news but since my discovery that I must now pay HP to fix BIOS related issues for their server offerings I am no longer a "customer for life". As a consultant who...
View ArticleRe: DL380p g8 with p420i RAID controller
If doing it via the CLI is the same as using the GUI program, then it should work fine. It will do an online expansion, so you won't have to take the system down while that's happening.The first step...
View Article