Hi there, I have just been handed a new HP DL580 Gen8 and StorageWorks D2600 and asked to configure them quickly. The issue I am facing is the D2600 is not recognized by the DL580. I have connected the SAS to mini-SAS cable from I/O Module A, Port 1 on the StorageWorks D2600 to Port 1 of the Mini-Sas card of the DL580 server. The SmartArray controller of the DL580 is P830i. All firmware and drivers on the DL580 is current and updated by the HP SUM. The DL580 is running Windows Server 2008 R2. Bios is running in Legacy BIOS mode. I do not see the D2600 in the HP SmartArray Config Utility. I feel like I have done all that the limited documentation recommends, but it seems I am missing something, probably something really simple. Does anyone out there have any experience with this configuration that could offer some advice?
↧