Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Browsing all 30225 articles
Browse latest View live

Re: No hard drive leds

Hi, Not sure how old this post is and the generation of your DL360. If there are no hard drive led, the possibility is that the drive carrier or cable or backplane and even the controller would be a...

View Article


Re: DL380G4 - Xeon 3.2ghz

Hi, Generation 4 server is pretty old which cannot be upgraded to RHEL6 and 6TB storage capacity.The smart array controller which is compatible with the server cannot support 6TB capacity. Thank You!I...

View Article


Re: DL580G7 crashes with bugcheck 0x00000080 - HYPER-V 2012 CLUSTER

Hi, Try this document:https://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?docId=mmr_kc-0107482 Also perform Insight Diagnostics from Smart Start CD. Thank You!I am a HP...

View Article

Re: New 1Gb Broadcom Multifunction Win64 driver (7.8.6.0) is buggy

I'm not declaring success quite yet, but I did just update a couple of my servers to the 7.8.50.0 drivers, and so far it seems like it's working without doing any other modifications, fixes,...

View Article

Re: PROLIANT SERVER

Hi, The fans spin at high speed when you switch ON the server, its because the fans are checked for their functionality.If any fans does not spin or is slow then its reported at POST.Refer to this...

View Article


Intermittent Connection

I recently upgraded a  DL385 Gen 7 from Windows 2003 to 2008 R2.  The connection to the switch is intermittent.  The 2003 platform never experienced this issue.  I've tried the latest broadcom drivers,...

View Article

Re: DL380 G6 SAS Backplane Firmware update problem

If you are upgrading the SAS backplane on a G7, be sure your iLO3 is version 1.57 or later.

View Article

Re: Enter Bios !

Hello, I know this post is quite old, but I cant enter bios unless I remove the smart array raid controller, or move it to another slot. Then it gives me the option to boot to BIOS along with other...

View Article


Re: ML350 G3 server can no longer boot, says no SCSI boot device found

Hello Matti, I have an ML350 G3 with the smart array Raid Controller. I have RAID 0 set on two SCSI disks and the disks check OK when Smart Array checks them. I installed a SATA controller to add new...

View Article


Re: HP Windows 2012 Foundation ROK - cannot install DotNET 3.5

Solved, i put the solution here if it can do any good. Changed GPO:   Computer Configuration\Administrative Templates\System\Specify setting for optimal component installation and component repair To:...

View Article

Re: ml350 g5 extend array

Hi, Once you add new hard drives, these drives will be shown as Unassigned drives in ACU.Add them to the existing logical drive. Follow this document. Thank You!I am a HP employee.

View Article

Re: ML310 G5 Raid1 Drive Replace

Hi, If the drives are Hot Plug, you can replace it online, no need to switch off the server.To check the firmware versions, check during POST, alternatively check the System Management Homepage and...

View Article

Re: Intermittent Connection

Hi, What is the Switch model and how did you check the intermittent connection? Thank You!I am a HP employee.

View Article


Re: iLO 3 Web Interface not working

Hi, Does the web page time out? If YES, see this document. You may also try to Reset iLO.  It will reset any existing connections to iLO, you may need to reconfigure iLO with its IP address. Resetting...

View Article

Re: logical drive unavailable after a disk was replaced

Yeah, as it was pointed to me, disks 1 and 2 arent' identical - they do have equal number of cylinders, but they have different cylinder size, and, according to this, their size can be calculated and...

View Article


hp management utility for solaris

I can find hp management utility for solaris, help pleasemy server dl 380 G5, smart array p400 server.

View Article

Re: ml350 g5 extend array

Thank you Suman, very effective!

View Article


Re: HP ML350e Gen8 Fan Noise - keeps happening - there must be a serious...

We have a server which has had its mother board replaced 3x times.  Problem of excessive fan speeding and then servr crashing keeps happening.  The server is 100% HP with the latest firmware, so we are...

View Article

Re: replace of disks in RAID5

I made updating the firmware of the firmwareand no fix this error on the new disk ....  is possible to fix this error?

View Article

Re: replace of disks in RAID5

 Please generate the Array Diagnostics Utility (ADU) report on the server and contact HP Support for hard drive replacement.  Regards, Vijayasarathy

View Article
Browsing all 30225 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>