Re: SAS Drivers for ML310 G4 server
After long investigation I discovers that the two disks have failedCan I place dell SAS 146 3.5 inch in G4 server And doesn't my server also support 2.5 inch SAS.Please advise
View ArticleRe: SAS Drivers for ML310 G4 server
HP 418367-B21 146GB 10K SAS 2.5-Inch Dual Port Hard DriveCan u advise if this supported by my serverThanks
View ArticleRe: ProLiant DL380 G7 - Lost NICs after Driver-Update
I installed on 2 Proliant DL380 G7 servers the spp:HP Service Pack for ProLiant (SPP) Version 2014.02.0OS: Windows server 2008 R2 Standard, SP1, EN One of them are stopped with blue screen, ...driver...
View ArticleRe: PCI\VEN_1095&DEV_3132&SUBSYS_71321095&REV_01 drivers
>I am unable to open the link that you have posted. The correct link is:http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx (The URL can be edited with Post...
View ArticleRe: DL380 G5 windows 7 professional installation
I've just installed Win 7 on a ML330 and it works perfectly.
View ArticleMixing single and dual port drives
I have a ML330 with a P410 controller, currently it has two 300gb SAS drives of type ST3300657SS which are dual port, Ive been offered some drives of type ST3300655SS which i believe are single port so...
View ArticleRe: HP ML115 G5 1610 Temperature Violation
Hi,I would try to recover the BIOS of my ProLiant ML115 but I'm not allowed to download the Systems ROMPaq Firmware Upgrade for HP ProLiant ML115 G5 Servers (For USB Key-Media) from HP site since now...
View ArticleRe: DL380 G5 windows 7 professional installation
if you install an unsupported OS, you can't get support from HP technical support, also the New way to update your server for Critical firmmawre isn't supported under Windows 7
View ArticleRe: SAS Drivers for ML310 G4 server
No, this HDD is not supported on your server.Check the PDF file it contains all compatibale Hardware with this server [with basic Smart array installed on it]
View ArticleRe: ProLiant DL380 G7 - Lost NICs after Driver-Update
One servers is Ok and the second server has an issue, that's right?if you have any screen shoot or log error or everything related to the issue that the server have, please send us in order to...
View ArticleRe: PCI\VEN_1095&DEV_3132&SUBSYS_71321095&REV_01 drivers
I can open it without any problem :)so have you downloaded the SPP?
View ArticleRe: Mixing single and dual port drives
check this QuickSpecs for the P410, you can find all HDD that you can use to add HDD to Array you need that P410 have Cache and battery
View ArticleRe: ML310 G5 AND SMART ARRAY P410 PROBLEM.
for your server it need to be update ;) for error You receive various Stop error messages in Windows Server 2008 R2when you try to resume a computer that has a large SATA hard disk here a KB that can...
View ArticleRe: PCI\VEN_1095&DEV_3132&SUBSYS_71321095&REV_01 drivers
>I can open it without any problem I don't see how, it has garbage chars in it:http://h17007.www1.hp.com/us/en/enterprise/servers%E2%80%8B/products/service_pack/spp/index.aspx
View ArticleRe: ML310 G5 AND SMART ARRAY P410 PROBLEM.
You welcome, If any information can help you to solve any issue please give it KUDO in order to help another peopoles thank you very much
View ArticleRe: How to enable Embedded NICs on Proliant dl380 G5
So try to do do an Clear NVRAM If the issue persist, replace MOBO
View ArticleRe: HP Proliant DL360 G7 not picking up SAN connected via SCSI
Hi, change Boot Controller Order under RBSU [BIOS], and verify the Boot Controller Order
View ArticleRe: How to enable Embedded NICs on Proliant dl380 G5
I'm checking on a spare DL380 G5...1) Hit F10 at boot and go into the setup utility2) select "System Options" from the ROM based setup3) select "Embedded NICs"4) Choose "NIC 1" or "NIC 2" boot...
View ArticleRe: How to enable Embedded NICs on Proliant dl380 G5
Already tried that. No luck. The ports are still stuck at the ISCSI settings.
View Article